16499
Wide Range Transmission Grip
- Securely pulls ACSR, AAC and bare copper cables
- Holds cable sizes from 0.68-Inch to 1.42-Inch (17.3 mm to 36.1 mm)
- Fine Sawtooth jaw geometry provides greater grip strength
- Spring closes grip on cable to hold the initial position
- Made in the USA
- Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- Max Safe Load of 12,000-Pound (5443 kg)
- Patent pending design
The Klein Tools Wide Range Transmission Grip was specifically designed to securely pull ACSR, AAC and bare copper cables. Holds a wide range of cable from 0.68-Inch to 1.42-Inch (17.3 mm to 36.1 mm). This grip has a maximum safe load of 12,000-Pound (5443 kg).
Specifications
Type:
Parallel Jaw Grip
Application:
Wire Pulling
Special Features:
One-Handed Grip
Overall Length (Inch):
13.1
Overall Height (Inch):
8.1
Overall Width (Inch):
2.4
Material:
Steel
Cable Type:
ACSR, AAC, Copper
Cable Diameter:
0.68'' to 1.42'' (17.3 to 36.1 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Round
Teeth Type:
Fine
Jaw Length (Inch):
4.85
Maximum Safe Load (lb):
12000
Weight (lb):
8.1
UPC:
092644470769
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
