1647724
Wide Range Distribution Grip, EHS Wire
- EHS Jaw holds a wide range of cable from 0.162-Inch to 0.883-Inch (4.11 to 22.42 mm)
- 50-Percent lighter than the KT4600 grip
- One-handed design makes for easier actuation
- Alternating sawtooth jaw geometry provides greater grip strength
- Made in the USA
- Spring closes grip on cable to hold the initial position
- Large opening in the handle accommodates a wide variety of hooks on hoists, winches and tackle blocks
- Max Safe Load of 5000-Pound (2268 kg)
- Patent pending design
Klein Tools' Wide Range Distribution Grip with EHS Jaw holds a wide range of cable from 0.162-Inch to 0.883-Inch (4.11 to 22.42 mm). This versatile, one-handed actuation grip is 50-Percent lighter than the Klein's KT4600 grip. Made in the USA, this grip has a maximum safe load of 5000-Pound (2268 kg).
Specifications
Type:
Parallel Jaw Grip
Application:
Wire Pulling
Special Features:
One-Handed Grip
Overall Length (Inch):
10.25
Overall Length (cm):
26
Overall Height (Inch):
8
Overall Height (cm):
20.3
Overall Width (Inch):
1.75
Overall Width (cm):
4.4
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.162 to 0.883'' (4.11 to 22.42 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
No
Jaw Type:
Round
Teeth Type:
Coarse
Jaw Length (Inch):
3.31
Jaw Length (cm):
8.4
Maximum Safe Load (lb):
5000
Maximum Safe Load (kg):
2268
Weight (lb):
2.9
Weight (kg):
1.3
UPC:
092644470745
Warnings
- Grips are to be used for temporary installation, not for permanent anchorage.
- When used on/or near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
