Pliers, Long Nose Side-Cutters, Insulated, 7-Inch

D203-7-INS

  • Needle Nose Pliers are individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • Forged in the USA with custom, US-made tool steel for maximum durability
  • Curved handles provide greater tool control
  • Integral guards help prevent hand contact with conductive parts
1000volt Product Icon
forged-usa-en Product Icon
Videos
Downloads
Images
High-Res JPG d2037ins_photo.jpg
Interactive Catalog

Klein Tools Insulated Long Nose Side-Cutting pliers are 1000V rated for safety on the job. The long nose is designed for grabbing and looping wire. Dual layer, orange-over-white insulation provides a warning sign that insulation may be compromised. The molded insulation meets or exceeds ASTM F1505-16 and IEC 60900:2012 standards for insulated tools. Cutting knives are induction hardened for long life.

Specifications
Type:
Long Nose Side Cutting Pliers
Application:
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
7.37'' (18.7 cm)
Material:
Induction Hardened Steel
Jaw Length:
2.43'' (6.2 cm)
Jaw Width:
0.688'' (1.7 cm)
Jaw Thickness:
0.375'' (1 cm)
Point Diameter:
0.094'' (0.24 cm)
Cutting Knives:
Standard
Knife Length:
0.572'' (1.5 cm)
Cut Style:
Side-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange
Handle Finish:
2-Layer Insulation
Handle Length:
3.87'' (9.8 cm)
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
4.8 oz (136 g)
UPC:
092644710254
Additional Information
Warnings
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Wear approved eye protection.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
  • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.