2139NEEINS
Insulated Pliers, Slim Handle Side Cutters, 9-Inch
- 1000 V Rated for safety on the job. VDE Certified with unique three-part insulation with white underlayer provides warning sign that insulation may be compromised
- Streamlined design with sure-gripping, cross-hatched knurled jaws
- Multi-color, sleek design with small thumb guards for ease of handling and easy storage in your tool belt
- Durable, molded insulation meets or exceeds ASTM F1505 and IEC 60900 standards for insulated tools
- Made in USA with custom US-made tool steel
- Hot-riveted joint for smooth action with New England nose type
- Precision machined knives cut cleanly and crisply even on fine stranded wire, mule tape and pull line
Klein Tools Electrician's Insulated High-Leverage Side-Cutting pliers are 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumb guards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.
Specifications
Type:
Side Cutting Pliers
Application:
Cuts ACSR, Screws, Nails and Most Hardened Wires
Special Features:
Integral Guards Help Prevent Hand Contact With Conductive Parts
Overall Length (Inch):
9.53
Overall Length (cm):
24.2
Overall Width (Inch):
2.49
Overall Width (cm):
6.3
Material:
Induction Hardened Steel
Nose Type:
New England
Jaw Length (Inch):
1.91
Jaw Length (cm):
4.9
Jaw Width (Inch):
1.25
Jaw Width (cm):
3.2
Jaw Thickness (Inch):
0.62
Jaw Thickness (cm):
1.6
Jaw Capacity (Inch):
1.375
Jaw Capacity (cm):
3.5
Cutting Knives:
1
Knife Length (Inch):
0.781
Knife Length (cm):
2
Cut Style:
Side-Cutting
Screw Shearing:
No
Joint Type:
Hot-Riveted
Handle Color:
Orange/Gray
Handle Finish:
3-Layer Insulation
Handle Length (Inch):
5.58
Handle Length (cm):
14.2
Insulated:
Yes
Tether Capable:
No
Standards:
IEC 60900 and ASTM F1505
Weight (oz):
20.8
Weight (g):
590
UPC:
092644701931
Warnings
- Whenever possible, always de-energize lines and equipment prior to working on or around them.
- Only use tools that are marked with the official international 1000-volt rating symbol shown below, if there is any chance that the tools will make contact with an energized source.
- Always inspect your tools before use.
- Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
- Keep tool clean, dry and free of any surface contaminants.
- Destroy tool if the insulation is damaged in any way.
- Do NOT use to pry or chisel.
- Wear approved eye protection.
