16845CAT
Chicago® Grip Coated Guy Wire with Chain
- Aggressive sawtooth jaw profile resists build-up from galvanized coating on guy strand and EHS cables
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Designed for cable sizes 0.218 to 0.55-Inch (5.54 to 13.97 mm)
- 5-Inch (127 mm) jaw length for extra gripping area on stranded cable and spring that closes grip on cable helping to maintain initial position
- Made in USA
- Locking handle keeps jaw open while grip is placed on cable with a hot stick
- Maximum Safe Load is 8000-Pound (3629 kg)
This Chicago Grip is designed specifically to work with coated guy strand and EHS cable. Klein grips are made of drop-forged, quality US steel and heat treated for strength and durability. The chain, toggle and shackle keep the grip from falling off the cable. The 5-Inch jaw length increases the surface area contact with the cable minimizing cable damage. The sawtooth jaw profile resists galvanization build-up.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Special Features:
Equipped With a Chain, Toggle and Shackle
Overall Length (Inch):
13.3
Overall Length (cm):
33.8
Overall Height (Inch):
2.5
Overall Height (cm):
6.4
Overall Width (Inch):
7.6
Overall Width (cm):
19.3
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Round
Teeth Type:
Aggressive
Jaw Length (Inch):
5
Jaw Length (cm):
12.7
Maximum Safe Load (lb):
8000
Maximum Safe Load (kg):
3628.7
Weight (lb):
6.9
Weight (kg):
3.1
UPC:
092644470707
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
