Klein Tools - For Professionals Since 1857

Curved Jaw Grip for EHS Cable with Latch

S1684-74H

  • When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
  • To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour
  • Available with hot-line latch and spring
  • Manufactured in the United States to provide line workers with maximum strength and durability
Video
Images
JPG (High Resolution) 1684-74_photo.jpg
Interactive Catalog

Designed for use on EHS (extra-high-strength) galvanized-steel cable. Double ''V'' contour reduces the possibility of slippage and damage to the cable. Manufactured in the United States to provide line workers with maximum strength and durability.

Specifications
Type:
Curved Jaw Grip
Application:
Extra High Strength Galvanized Steel Cable
Special Features:
Latch
Overall Length:
9'' (228.9 mm)
Overall Height:
2.25'' (57.2 mm)
Overall Width:
7.203'' (183 mm)
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Jaw Type:
Double V, Milled Curved
Jaw Length:
5'' (127.0 mm)
Weight:
6.45 lb (2.93 kg)
UPC:
092644471735
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.