Screwdriver Set, 1000V Insulated, 3-Piece

85073INS

  • Insulated Screwdriver Set includes 4-Inch round shanks in a #2 Square, #2 Phillips and 1/4-Inch Slotted tips (Cat. Nos. 6844INS, 6834INS, 6824INS)
  • 1000V rated screwdrivers feature a layer of bright orange impact and flame resistant insulation to protect from electrical shock
  • Made in the USA
  • Tether hole for added safety when working at height
  • Cushion-Grip™ handles for greater torque and comfort
  • Tip-Ident® quickly identifies the screwdriver tip orientation so you can easily engage the screwdriver tip with the screw
  • Meets or exceeds ASTM F1505-16(2021) and IEC 60900:2018
1000volt Product Icon
wf_tip-phillips Product Icon
wf_tip-square Product Icon
wf_tip-slotted Product Icon
Videos
Downloads
Images
High-Res JPG 85073ins_photo.jpg
Interactive Catalog

This 3-Piece Made in the USA Insulated Screwdriver Set features assorted Klein Tools' screwdrivers. Each is individually tested to exceed the IEC 60900 and ASTM F1505 standards for insulated tools. Two layers of insulation provide protection against electric shock.

Specifications
Application:
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Included:
3 Screwdrivers: 4'' (10 cm) Shanks in 1/4'' (0.6 cm) Slotted, #2 Phillips and #1 Square Tips
Magnetic:
No
Insulated:
Yes
Shank Length:
4'' (10.2 cm)
Material:
Steel, Plastic
Handle Material:
Rubber
Handle Color:
Black
Handle Length:
4.31'' (10.9 cm)
Handle Diameter:
1.24'' (3.2 cm)
Color Code:
Orange
Overall Length:
8.32'' (21.1 cm)
Overall Height:
8.32'' (21.1 cm)
Overall Width:
1.24'' (3.2 cm)
Number of Pieces:
3
Type:
Insulated Screwdriver Set
Standard:
ASTM F1505-16(2021)
Weight:
11.9 oz (337 g)
UPC:
092644329128
Additional Information
Feature Icon klein/wp_made-usa-en.jpg
Warnings
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them.
  • Always inspect your tools before use.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Keep tool clean, dry and free of any surface contaminants.