Klein Tools - For Professionals Since 1857

Chicago® Grip Bell-System Type H Grip


  • Identical to Bell-System type ''H'' strand puller
  • Equipped with chain, toggle and shackle
  • For support wire .134 and larger, refer to 1659 series
  • Outside diameter of support wire includes thickness of polyethylene coating
JPG (High Resolution) 1684-5at_photo.jpg

The Klein Tools 1628-16AT Chicago Grip is identical to a Bell-System type -InchH-Inch Strand Puller. It is equipped with a chain, toggle and shackle to keep the grip from falling off the cable. All Klein grips are manufactured from custom drop-forged steel that is machined and heat treated for excellent durability. Each grip is individually hand inspected and actuated for proper function. Grips are also rigorously tested and pulled to rated load to ensure the highest quality and reliability.

''H'' Strand Puller
Special Features:
Equipped with a Chain, Toggle and Shackle
Cable Diameter:
0.31'' to 0.62'' (7.87 to 15.75 mm)
Jaw Length:
7.25'' (184.2 mm)
Maximum Safe Load:
15000 lb (6803 kg)
15.8 lb (7.17 kg)
Additional Information
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.