1692-5AT
Chicago® Grip Bell-System Type Grip
- For 0.218 to 0.550-Inch (5.54 to 13.97 mm) diameter cable range with Max Safe Load of 8000-Pound (3629 kg)
- Equipped with chain, toggle and shackle to keep grip from falling off the cable
- Outside diameter of support wire includes thickness of polyethylene coating
- For support wire 0.134 and larger, refer to 1659 series
- Made in USA
Videos
Images
High-Res JPG
1684-5at_photo.jpg
Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Material:
Steel
Cable Type:
Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
No
Swing Latch:
No
Spring:
Yes
Locking Handle:
Yes
Jaw Type:
Double V
Teeth Type:
Smooth
Jaw Length (Inch):
5
Maximum Safe Load (lb):
8000
Weight (lb):
6.6
UPC:
092644471858
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
