Klein Tools - For Professionals Since 1857

Dual Range Non-Contact Voltage Tester

NCVT-2

  • Automatically detects and indicates low voltage (12-48V AC) and standard voltage (48-1000V AC) allowing broad application
  • Non-contact detection of standard voltage in cables, cords, circuit breakers, lighting fixtures, switches, outlets and wires
  • Non-contact detection of low voltage in security, entertainment, communications, environmental control, and irrigation systems
  • High intensity, bright green LED indicates the tester is operational and aids in illuminating the workspace
  • Dual Range testing, select 12-1000V AC or 48-1000V AC
  • Auto power-off feature conserves and extends battery life
  • CAT IV 1000 Volt rating provides expanded operation and protection
  • Lightweight, durable polycarbonate plastic resin construction; convenient pocket clip
  • 9.8 ft / 3 m drop protection
  • Safety Rating: CAT IV 1000V
  • Conforms to CE requirements
Video
Images
JPG (High Resolution) ncvt-2_photo.jpg
PNG (Transparent Background) ncvt2.png

This Dual-Range Non-Contact Voltage Tester automatically detects low voltage and standard voltage. A bright green LED will tell you the tester is working and also functions as a worklight. The light flashes red and two distinct warning tones sound when either low or standard voltage is detected.

Specifications
Special Features:
50 - 500 Hz Low-Pitched Pulsing Beeping Sound; Blue LED Turns Off and Red LED Blinks (Approximately 2x Per Second)
Drop Protection:
9.8 ft (3 m)
Voltage:
12 - 1000V AC
Frequency:
50 - 500 Hz
Pollution Degree:
2
Standard:
CAT IV 1000V
Included:
(2) Alkaline 1.5V AAA Batteries
Weight w/Batteries:
1.6 oz (45 g)
Batteries:
2 x AAA
Overall Length:
5.5'' (139.7 mm)
Overall Height:
1'' (25.4 mm)
Overall Width:
0.719'' (18.3 mm)
Weight:
0.80 oz (22.7 g)
UPC:
092644690020
Additional Information
Warnings
  • Read, understand, and follow all warnings, cautions, safety information, and instructions in the manual before operating or servicing this tester. Failure to follow instructions could result in death or serious injury.
  • Never assume neutral or ground wires are de-energized. Neutrals in multi-wire branch circuits may be energized when disconnected and must be retested before handling.