Klein Tools - For Professionals Since 1857

Chicago® Grip - Bell-System Type L Grip

1684-5AT

  • Identical to Bell-System type ''L'' strand puller
  • Equipped with chain, toggle and shackle to keep grip from falling off the cable
  • For support wire .134 and larger, refer to 1659 series
  • Outside diameter of support wire includes thickness of polyethylene coating
Images
JPG (High Resolution) 1684-5at_photo.jpg
PNG (Transparent Background) 16845at.png

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. Identical to Bell-System type -InchL-Inch strand puller. Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.

Specifications
Type:
''L'' Strand Puller
Cable Diameter:
0.218'' to 0.550'' (5.54 to 13.97 mm)
Jaw Length:
5'' (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.9 lb (3.12 kg)
UPC:
092644471636
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.