Klein Tools - For Professionals Since 1857

Chicago® Grip Bell-System Type Grip

1692-5AT

  • For 0.218 to 0.550-Inch (5.54 to 13.97 mm) diameter cable range
  • Aggressive jaw pulls steel strand cable
  • Max Safe Load of 8000-Pound (3629 kg)
  • Equipped with chain, toggle and shackle to keep grip from falling off the cable
  • Outside diameter of support wire includes thickness of polyethylene coating
  • For support wire 0.134 and larger, refer to 1659 series
Video
Images
JPG (High Resolution) 1684-5at_photo.jpg
Interactive Catalog

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Equipped with chain, toggle and shackle. For support wire 0.134-Inch and larger, refer to 1659 series. Outside diameter of support wire includes thickness of polyethylene coating.

Specifications
Type:
''L'' Strand Puller
Cable Type:
Steel Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Jaw Type:
Double V
Jaw Length:
5'' (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.6 lb (2.99 kg)
UPC:
092644471858
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.