Deceleration Unit with Dual Nylon-Webbing Lanyard


This product is no longer in production
  • Designed for use in 100% tie-off fall-arrest systems. Allows attachment to a new fall-arrest anchorage with one lanyard leg, while staying connected to the original fall-arrest anchorage with the remaining lanyard leg.
  • Deceleration unit is attached to two 1'' (25 mm) orange nylon-webbing lanyards impregnated with resin for greater durability and abrasion resistance.
  • Equipped with three drop-forged steel, corrosion-resistant Klein-Lok® locking snap-hooks with 11/16'' (17 mm) throat opening.
  • Nylon-webbing lanyards are ideal for situations where the worker is often turning or moving around (webbing will not reverse-twist [hockle]).
  • Designed solely for use in fall-arrest systems.
  • Progressive tearing away of nylon stitching absorbs most of a fall-arrest impact.
  • Progressive tearing away of nylon stitching absorbs most of a fall-arrest impact.
  • A fully released deceleration unit extends the original length of a lanyard by a total of 3.5 ft (1.07 m) and virtually eliminates rebound.
  • Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable, or nylon webbing.
  • All Klein deceleration units are certified and compliant with ANSI and CSA requirements.
  • On Klein deceleration units, a red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit.
High-Res JPG 87416_photo.jpg
PNG 87416.png
6 ft (1.83 m)
Additional Information
Feature Icon klein/wf_ope-fall-arrest-icon.jpg