S1684-74H
Curved Jaw Grip for EHS Cable with Latch
- When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
- To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour
- Available with hot-line latch and spring
- Made in USA to provide line workers with maximum strength and durability
Videos
Images
High-Res JPG
1684-74_photo.jpg
Designed for use on EHS (extra-high-strength) galvanized-steel cable. Double ''V'' contour reduces the possibility of slippage and damage to the cable. Manufactured in the United States to provide line workers with maximum strength and durability.
Specifications
Type:
Chicago Grip
Application:
Wire Pulling
Overall Length:
9'' (22.9 cm)
Overall Height:
2.25'' (5.7 cm)
Overall Width:
7.203'' (18.3 cm)
Material:
Steel
Cable Type:
Aircraft, EHS, Messenger, Guy Strand
Cable Diameter:
0.218'' to 0.55'' (5.54 to 13.97 mm)
Hot Latch:
Y
Swing Latch:
N
Spring:
Y
Locking Handle:
Y
Jaw Type:
Double V
Teeth Type:
Milled/Curved
Jaw Length:
5'' (12.7 cm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.45 lb (2.93 kg)
UPC:
092644471735
Additional Information
Warnings
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Do not exceed rated capacity.
- Always match proper size and type of grip to application.
- Grips are to be used for temporary installation, not for permanent anchorage.
