Klein Tools - For Professionals Since 1857

Curved Jaw Grip for EHS Cable with Latch

S1684-74H

  • When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip
  • To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour
  • Available with hot-line latch and spring
Downloads
Images
JPG (High Resolution) 1684-74_photo.jpg

Specifications
Type:
Curved Jaw Grip
Application:
Extra High Strength Galvanized Steel Cable
Special Features:
Latch
Overall Length:
9'' (228.9 mm)
Overall Height:
2.25'' (57.2 mm)
Overall Width:
7.203'' (183 mm)
Cable Diameter:
0.218'' to 0.550'' (5.54 to 13.97 mm)
Jaw Length:
5'' (127.0 mm)
Weight:
6.45 lb (2.93 kg)
UPC:
092644471735
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.