Product Information Search

Search

Search for brochures, instructions or MSDS information by searching for the specific product name or catalog number.

The search found 612 results in 0.473 seconds.

Search results

    12:1 Dual Laser Infrared Thermometer

    Cat. No. IR2000
    Features a wide measurement range, -76° to 1022°F. Tight distance-to-spot ratio. Dual lasers for accurate target measurement area. K-type thermocouple input. Backlit display, Auto Shut off, Work light.

    12:1 Infrared Thermometer Auto Scan

    Cat. No. IR2000A
    The Klein Tools 12:1 Dual Laser Infrared Thermometer measures transformers, motors, compressors, ducts, electrical circuits, valves, vents, etc., in hard to reach areas quickly and easily. It offers safe temperature measurements -- without contact -- while systems are operating. The rugged thermometer provides drop protection of up to 6.6 ft. or 2 meters making it more durable and able to handle the rigors of a job site.

    Flush Cutter, Lightweight, 5-Inch

    Cat. No. D275-5
    Klein's precision flush cutter shears soft wire up to 18 AWG producing a flat, straight cut. The ultra slim profile makes it easier to get into tight spaces. Cushioned grips and steel spring return help reduce fatigue when making repetitive cuts. The blades are heat treated for long life. This is your go-to tool when you want precision and control when cutting soft wire.

    #0 Phillips Electronics Screwdriver, 3'' Shank

    Cat. No. 613-3
    Designed for precision work, Klein's electronics screwdrivers feature a rotating cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision ground to fit screw openings securely. Rotating caps and Klein's exclusive cushion-grip handles offer outstanding comfort and control.

    #2 Phillips Screwdriver 4'' Round Shank

    Cat. No. 603-4
    Cushion Grip handle allows for greater torque and comfort. Integral flanges inside handle provide solid, twist resistant blade anchor. Special heat treated shafts. Precision machined tip for exact fit. Premium chrome plated for smooth feel and corrosion resistance. Patented Tip Ident quickly identifies the type of screwdriver and screwdriver tip orientation. Meets or exceeds applicable ASME / ANSI specifications. No. 2 Phillips with 4 In. shank.

    1'' Ship Auger Bit with Screw Point 15'' L

    Cat. No. 53441
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1-1/16'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53442
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1-1/2'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53446
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1-1/4'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53444
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1-1/8'' Ship Auger Bit 15'' Length

    Cat. No. 53443
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1-3/8'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53445
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    1/16'' Slotted Electronics Screwdriver, 2'' Shank

    Cat. No. 614-2
    Designed for precision work, Klein's electronics screwdrivers feature a rotating cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision ground to fit screw openings securely. Rotating caps and Klein's exclusive cushion-grip handles offer outstanding comfort and control.

    1/4'' Keystone Demolition Driver, 4'' Shank

    Cat. No. 602-4DD
    Klein's ''Made in the USA'' Slotted Demolition Driver is engineered, manufactured and tested for prying and chiseling. The heat-treated metal shaft runs the complete length of the handle to the metal strike cap. This transfers the impact force directly to the work surface. In addition, the plated metal strike cap protects the handle from hammer blows.

    1/8'' Cabinet Electronics Screwdriver 6'' Shank

    Cat. No. 614-6
    Designed for precision work, Klein's electronics screwdrivers feature a rotating cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision ground to fit screw openings securely. Rotating caps and Klein's exclusive Cushion-Grip handles offer outstanding comfort and control.

    10'' Quick-Adjust Klaw™ Pump Pliers

    Cat. No. D504-10B
    Unique jaw design provides multiple points of contact for maximum torque. Push button and quick ratchet feature allows for fast and easy adjustment to any position. Compact, narrow design for easy work in small or hard to reach spaces. Gripping surface with specially hardened teeth for reduced wear and positive grip. Extended grips for added comfort.

    100' Non-Conductive Fiberglass Fish Tape

    Cat. No. 56024
    Non-conductive fish tape and eyelet tip offer added protection against shock from energized sources. Permanent, laser etched 1' increments on the tape allow you to more accurately measure the depth of conduit runs and determine the amount of tape left to pay out. Non-conductive fiberglass fish tape for flexibility and easy navigation through conduit runs. Non-conductive eyelet slides easily over existing wires and through multiple bends. The lightweight, strong fiberglass tape resists harsh elements and is strength rated for up to 500 pulling pounds.

    11'' (279 mm) Fox Wedge - Steel

    Cat. No. 7FW27050
    This Klein Tools Fox Wedge is designed for splitting mating surfaces. It can also be used to level machinery and structures before fixing in place. It's constructed of durable steel for long life.

    11/16'' Ship Auger Bit 15'' Twist Length

    Cat. No. 53436
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    118'' Scaling Bar - Tubular Aluminum - Hexagon

    Cat. No. 7SCTH3000
    Klein Tools Tubular Aluminum Scaling Bars are designed for use in the mining industry to pry overhanging rock. It's aluminum tube body means this scaling bar is lightweight which translates to less user fatigue. The hexagon shape of the bar provides better control.

    12 Piece Electrician Tool Set

    Cat. No. 92003
    Perfect kit for the professional or apprentice. 19-pocket nylon tool pouch holds all tools in set with room for more. Set includes: one side-cutting fish tape pulling plier, one diagonal-cutting plier, one long-nose side-cutting plier, one pump plier, one wire stripper/cutter, one power-return magnetic tip tape measure, one Phillips screwdriver,. One cabinet-tip screwdriver, two square-recess tip screwdrivers, one tool pouch, and one web work belt. High-leverage side-cutting pliers - fish tape pulling (D213-9NETP).

    12'' (305 mm) Spoon Bar - Round

    Cat. No. 5SB30010
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    12'' Classic Klaw™ Pump Pliers

    Cat. No. D504-12
    Unique jaw design provides multiple points of contact for maximum torque. Compact, narrow design for easy work in small or hard to reach spaces. Gripping surface with specially hardened teeth for reduced wear and positive grip. Extended grips for added comfort.

    12'' Quick-Adjust Klaw™ Pump Pliers

    Cat. No. D504-12B
    Unique jaw design provides multiple points of contact for maximum torque. Push button and quick ratchet feature allows for fast and easy adjustment to any position. Compact, narrow design for easy work in small or hard to reach spaces. Gripping surface with specially hardened teeth for reduced wear and positive grip. Extended grips for added comfort.

    120'' Scaling Bar Tubular Aluminum Round

    Cat. No. 7SCT3050
    Klein Tools Tubular Aluminum Scaling bars are designed for use in the mining industry to pry overhanging rock. The aluminum tube body is lightweight which translates to less user fatigue. These scaling bars have a round shape.

    125' Steel Replacement Fish Tape

    Cat. No. 56125
    Klein Tools' Steel Replacement Fish Tapes feature permanent laser-etched markings for more accurate measuring of conduit runs. Available in three sizes: 65' (19 m), 125' (38 m), and 240' (73 m).

    13/16'' Ship Auger Bit 15'' Twist Length

    Cat. No. 53438
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    14 Piece Electrician Tool Set

    Cat. No. 80014
    The Klein Tools 14-Piece Electrician's Tool Set includes a variety of valuable tools for any professional or do-it-yourself electrician. The set includes 4 sets of pliers and 5 popular screwdriver sizes. It also comes with a tape measure, wire stripper, and convenient leather pouch to hold all of the tools.

    142'' Scaling Bar - Tubular Aluminum - Hexagon

    Cat. No. 7SCTH3600
    Klein Tools Tubular Aluminum Scaling Bars are designed for use in the mining industry to pry overhanging rock. It's aluminum tube body means this scaling bar is lightweight which translates to less user fatigue. The hexagon shape of the bar provides better control.

    144'' Scaling Bar Tubular Aluminum Round

    Cat. No. 7SCT3660
    Klein Tools Tubular Aluminum Scaling bars are designed for use in the mining industry to pry overhanging rock. The aluminum tube body is lightweight which translates to less user fatigue. These scaling bars have a round shape.

    15'' x 25/32'' Podger Bar Hexagon

    Cat. No. 5POB37520
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    15'' x 5/8'' Podger Bar Hexagon

    Cat. No. 5POB37516
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    15/16'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53440
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    169'' Scaling Bar - Tubular Aluminum - Hexagon

    Cat. No. 7SCTH4300
    Klein Tools Tubular Aluminum Scaling Bars are designed for use in the mining industry to pry overhanging rock. It's aluminum tube body means this scaling bar is lightweight which translates to less user fatigue. The hexagon shape of the bar provides better control.

    170'' Scaling Bar Tubular Aluminum Round

    Cat. No. 7SCT4320
    Klein Tools Tubular Aluminum Scaling bars are designed for use in the mining industry to pry overhanging rock. The aluminum tube body is lightweight which translates to less user fatigue. These scaling bars have a round shape.

    18 Piece Journeyman Tool Set

    Cat. No. 80118
    The Klein Tools Journeyman 18-Piece Tool Set includes many of the vital tools needed for electrical wiring and connecting work. Featured in this tool set are Klein Journeyman pliers. These pliers have dual-material handles providing added comfort and grip. This set also comes with a handy work belt and a 10-pocket tool pouch.

    18'' (457 mm) Spoon Bar - Round

    Cat. No. 5SB45016
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    18'' x 25/32'' Podger Bar Hexagon

    Cat. No. 5POB45020
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    18'' x 5/8'' Podger Bar Hexagon

    Cat. No. 5POB45016
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    200A AC Fork Meter

    Cat. No. CL3000
    Open jaw current measurement. Backlit display. Capacitance. Frequency. Includes case, test leads and battery.

    200A AC Fork Tester

    Cat. No. CL3200
    The Klein Tools 200A AC Fork Tester features an extra large jaw opening that accepts 3/0 wire. It also has a shorter jaw depth making it easier to reach into tight spaces. Use the magnetic mount on the base to use this fork meter hands free.

    200A Hook Meter

    Cat. No. CL3100
    Hook current measurement for tight areas. Automatically selects currrent or voltage measurement. Backlit display and worklight. Analog bar graph. Includes case, test leads and battery.

    24'' (610 mm) Spoon Bar - Round

    Cat. No. 5SB60020
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    24'' Canvas Tool Bag

    Cat. No. 5102-24
    This general tool bag helps to organize your tools. Made of heavy-duty natural canvas, this bag will stand the test of time.

    24'' x 25/32'' Podger Bar Hexagon

    Cat. No. 5POB60020
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    240' Steel Replacement Fish Tape

    Cat. No. 56240
    Klein Tools' Steel Replacement Fish Tapes feature permanent laser-etched markings for more accurate measuring of conduit runs. Available in three sizes: 65' (19 m), 125' (38 m), and 240' (73 m).

    25 Foot Non-Magnetic Tape Measure

    Cat. No. 86125
    Klein Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged, rubberized industrial design of this non-magnetic single-hook tape offers a good grip and stands up to basic demands of the jobsite.

    3'' (76 mm) Fox Wedge - Steel

    Cat. No. 5FW07538
    Klein Tools Fox Wedges are made of durable, forged steel. Use these wedges for splitting mating surfaces. They are also great for leveling machinery and structures before fixing them in place.

    3-in-1 Impact Socket

    Cat. No. NRHD
    The Klein Tools versatile 3-in-1 Impact Socket is a must-have for linemen and utility workers. It features three popular square sizes that can be quickly and easily converted for a variety of utility type applications. It also has a long, hollow shaft designed to fit over long threaded bolts.

    3-in-1 Impact Socket Wrench Transmission

    Cat. No. NRHD2
    The Klein Tools versatile 3-in-1 Impact Socket is a must-have for linemen and utility workers. It features three popular square sizes that can be quickly and easily converted for a variety of utility type applications. It also has a long, hollow shaft designed to fit over long threaded bolts.

    3/32'' Slotted Electronics Screwdriver, 3'' Shank

    Cat. No. 614-3
    Designed for precision work, Klein's electronics screwdrivers feature a rotating cap for optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision ground to fit screw openings securely. Rotating caps and Klein's exclusive cushion-grip handles offer outstanding comfort and control.

    3/4'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53437
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    30'' (762 mm) Spoon Bar - Round

    Cat. No. 5SB75022
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    30:1 Dual Laser Infrared Thermometer

    Cat. No. IR3000
    Klein Tools' Professional series infrared thermometer features a wide measurement range, tight distance to spot ratio, K-type thermocouple input, dual lasers, and several calculation modes to assist in making the best possible measurements. Dual lasers allow you to see the actual target diameter. The backlit display and worklight allowfor easy reading in dark environments.

    36'' x 25/32'' Podger Bar Hexagon

    Cat. No. 5POB90020
    Used for levering and aligning, this podger bar is forged from tough high-tensile carbon manganese steel for maximum performance. The heel is set to 40° angle for optimum levering while the blade is ground to 30° angle for easy entry between surfaces. The taper is forged, not turned, for finer grain, giving greater tensile strength. The hexagonal profile provides greater control and minimizes bar roll.

    4'' (102 mm) Fox Wedge - Steel

    Cat. No. 5FW10025
    Klein Tools Fox Wedges are made of durable, forged steel. Use these wedges for splitting mating surfaces. They are also great for leveling machinery and structures before fixing them in place.

    4'' Fox Wedge Stainless Steel

    Cat. No. 7FWSS10025
    This Klein Tools Fox Wedge is designed for splitting mating surfaces. Its especially useful in marine conditions, because it's made of stainless steel which is resistant to corrosion. The stainless steel also provides greater hardness.

    4-in-1 Electronics Screwdriver, TORX®

    Cat. No. 32585
    Featuring four TORX® tamperproof bits in one tool, Klein's 4-in-1 Electronics Screwdriver is designed for precision work. The swivel cap provides optimum control. Made of the highest quality tempered steel, carefully heat-treated for maximum strength, and precision milled to fit screw openings securely. Cushion-Grip handles offer outstanding comfort and control. Corrosion-resistant chrome plated barrel that holds two double-ended bits.

    400A AC Clamp Meter

    Cat. No. CL1000
    The Klein Tools 400 Amp AC Digital Clamp Meter features a quick response bar graph that shows elusive fluctuations. The data hold feature also lets you capture any measurements so you can reference them later. Klein's innovative magnetic mount lets you operate this clamp meter hands-free.

    400A AC Clamp with Temperature

    Cat. No. CL1100
    Backlit display and worklight. Magnetic mount and lead storage. Non-Contact Voltage Tester. Analog Bar Graph. Temperature.

    400A AC/DC True RMS Clamp Meter

    Cat. No. CL2000
    Designed by electricians for electricians, this Klein Tools Clamp Meter measures both AC and DC currents up to 400 amps with accurate True RMS readings. It also measures capacitance making this a great tool for HVAC work. The magnetic mount allows you to secure the meter for hands-free operation. The large clamp opening also has a work light built in for better visibility in dark spaces.

    46'' (1168 mm) Spoon Bar - Round

    Cat. No. 5SB115025
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    47'' Scaling Bar, Chrome Alloy Steel, Hexagon

    Cat. No. 7SC120019
    These Klein Tools Scaling Bars are forged from durable, chrome alloy steel. They are designed for use in the mining industry for prying overhanging rock. Scaling bars feature heat-treated blades for maximum toughness.

    5/16'' Keystone Demolition Driver, 7'' Shank

    Cat. No. 602-7DD
    Klein's ''Made in the USA'' Slotted Demolition Driver is engineered, manufactured and tested for prying and chiseling. The heat-treated metal shaft runs the complete length of the handle to the metal strike cap. This transfers the impact force directly to the work surface. In addition, the plated metal strike cap protects the handle from hammer blows.

    5/8'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53435
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    54'' (1372 mm) Spoon Bar - Round

    Cat. No. 5SB135025
    Klein Tools' Spoon Bars are excellent for levering, prying between surfaces and aligning holes. The taper is forged, not turned, which provides greater tensile strength. The thin spoon blade ends provide easy access between surfaces and a gentle rolling lift.

    59'' Scaling Bar, Chrome Alloy Steel, Hexagon

    Cat. No. 7SC150019
    These Klein Tools Scaling Bars are forged from durable, chrome alloy steel. They are designed for use in the mining industry for prying overhanging rock. Scaling bars feature heat-treated blades for maximum toughness.

    6-Piece Trim-Out Set

    Cat. No. 80006
    Designed to allow electricians to efficiently handle a majority of their daily projects, the six-piece trim-out set is a portable solution for users who do not need a full range of tools for a particular job. It also is useful for apprentice electricians who are building their tool sets with core tools.

    6-Pocket Tool Pouch

    Cat. No. 5127
    This Klein Tools 6-Pocket Leather Tool Pouch features rivet reinforcement to promote longer life. In addition to the 6 pockets, the pouch has a knife snap holder. The pouch is designed to conveniently attach to a belt for ready access to items.

    600A AC Clamp Meter

    Cat. No. CL100
    Klein Tools' Clamp Meter features a large jaw size and its worklights illuminate dark work spaces. Data hold captures measurements in any situation.

    600A AC Clamp Meter

    Cat. No. CL1200
    Designed by electricians for electricians, this professional series auto-ranging clamp meter measures AC/DC voltage, AC current, resistance, capacitance, frequency and duty cycle. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV Safety rated and includes case, test leads and batteries.

    600A AC Clamp Meter with Temperature

    Cat. No. CL1300
    Designed by electricians for electricians, this professional series auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle and temperature. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV Safety rated and includes case, test leads, thermocouple and batteries. Great for HVAC applications.

    600A AC Clamp Meter with Temperature

    Cat. No. CL200
    The Klein Tools 600 Amp AC Digital Clamp Meter with Temperature features work lights that can help illuminate dark spaces. This meter is especially great for HVAC applications, because it measures frequency and capacitance. It also features an automatic shut-off that helps extend battery life.

    600A AC/DC TRMS Clamp Meter w/Temperature

    Cat. No. CL2300
    Designed by electricians for electricians, this professional series true RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle and temperature. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV Safety rated and includes case, test leads, test lead holder and batteries.

    600A AC/DC True RMS Clamp Meter

    Cat. No. CL2200
    Designed by electricians for electricians, this professional series true RMS auto-ranging clamp meter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency and duty cycle. The built-in magnetic mount allows for hands-free convenience. The unit is CAT IV Safety rated and includes case, test leads, test lead holder and batteries.

    65'' x 1-1/16'' Fence Bar Round

    Cat. No. 5FBR165025
    Klein Tools Round Fence Bars are great for digging holes, breaking clay, and tamping posts tight. It features a knob that is the optimum size for tamping, and it is forged on the bar, not welded for added durability. This fence bar also features a round profile which is easier on the hands.

    7'' (178 mm) Fox Wedge - Steel

    Cat. No. 5FW17550
    Klein Tools Fox Wedges are made of durable, forged steel. Use these wedges for splitting mating surfaces. They are also great for leveling machinery and structures before fixing them in place.

    7'' Classic Klaw™ Pump Pliers

    Cat. No. D504-7
    Unique jaw design provides multiple points of contact for maximum torque. Compact, narrow design for easy work in small or hard to reach spaces. Gripping surface with specially hardened teeth for reduced wear and positive grip. Extended grips for added comfort.

    7.5 M Double Hook Magnetic Tape Measure

    Cat. No. 86375
    Klein Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A magnetic double hook has a center top portion for hanging onto conduit right side up and upside down, while a 1-1/4 inch flared hook was designed specifically to pass-through 1-3/8 inch holes drilled for 1 inch conduit. This large magnet profile attaches to steel and along EMT conduit. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged rubberized industrial design offers a better grip and stands up to any task the jobsite demands.

    7/8'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53439
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    71'' Scaling Bar Tubular Aluminum Round

    Cat. No. 7SCT1800
    Klein Tools Tubular Aluminum Scaling bars are designed for use in the mining industry to pry overhanging rock. The aluminum tube body is lightweight which translates to less user fatigue. These scaling bars have a round shape.

    71'' Scaling Bar, Chrome Alloy Steel, Hexagon

    Cat. No. 7SC180019
    These Klein Tools Scaling Bars are forged from durable, chrome alloy steel. They are designed for use in the mining industry for prying overhanging rock. Scaling bars feature heat-treated blades for maximum toughness.

    71'' Scaling Bar,Tubular Aluminum, Hexagon

    Cat. No. 7SCTH1800
    Klein Tools Tubular Aluminum Scaling Bars are designed for use in the mining industry to pry overhanging rock. It's aluminum tube body means this scaling bar is lightweight which translates to less user fatigue. The hexagon shape of the bar provides better control.

    71'' x 1'' Fence Bar Hexagon

    Cat. No. 5FB180025
    Klein Tools Hexagon Fence Bars are great for digging holes, breaking clay, and tamping posts tight. It features a knob that is the optimum size for tamping, and it is forged on the bar, not welded for added durability. This fence bar also features a hexagon profile for greater control.

    71'' x 1-1/16'' Fence Bar Round

    Cat. No. 5FBR180025
    Klein Tools Round Fence Bars are great for digging holes, breaking clay, and tamping posts tight. It features a knob that is the optimum size for tamping, and it is forged on the bar, not welded for added durability. This fence bar also features a round profile which is easier on the hands.

    71'' x 1-3/16'' Fence Bar Hexagon

    Cat. No. 5FB180030
    Klein Tools Hexagon Fence Bars are great for digging holes, breaking clay, and tamping posts tight. It features a knob that is the optimum size for tamping, and it is forged on the bar, not welded for added durability. This fence bar also features a hexagon profile for greater control.

    71'' x 1-3/16'' Fence Bar Round

    Cat. No. 5FBR180030
    Klein Tools Round Fence Bars are great for digging holes, breaking clay, and tamping posts tight. It features a knob that is the optimum size for tamping, and it is forged on the bar, not welded for added durability. This fence bar also features a round profile which is easier on the hands.

    8'' Diagonal Cutting Pliers High Leverage

    Cat. No. D248-8
    Klein Tools specializes in making some of the world's finest pliers. The high-leverage design of these 8'' (203 mm) Diagonal-Cutting pliers provides 36% greater cutting power than other pliers. The angled head design makes work easier in confined spaces. The hot-riveted joint ensures smooth action with no handle wobble.

    8'' Diagonal HD Cutting Pliers Angled Head

    Cat. No. J2000-48
    The Angled Head Diagonal Cutting Pliers from Klein Tools feature solid construction and performance for which Klein pliers are known. Short jaws and beveled cutting edges allow for close cutting of wire. They are designed with the rivet closer to the cutting edge for 36% greater cutting and gripping power than other pliers designs. Klein pliers are designed and built to exceptional quality standards in a tradition that dates back to 1857.

    8'' High Leverage Diagonal-Cutters

    Cat. No. D228-8
    Klein Tools specializes in making some of the world's finest pliers. The high-leverage design of these 8'' (203 mm) Diagonal-Cutting pliers provide 36% greater cutting power than other pliers. The hot-riveted joint ensures smooth action with no handle wobble.

    8'' Long Nose Pliers Side-Cutting

    Cat. No. D203-8
    Heavier design for greater cutting power. Extended handles provide added reach and leverage. Slim head design for working in confined areas. Induction hardened cutting knives for long life. Hot-riveted joint ensures smooth action and no handle wobble.

    83'' Scaling Bar, Chrome Alloy Steel, Hexagon

    Cat. No. 7SC210019
    These Klein Tools Scaling Bars are forged from durable, chrome alloy steel. They are designed for use in the mining industry for prying overhanging rock. Scaling bars feature heat-treated blades for maximum toughness.

    9'' Diagonal Cutting Pliers Angled Head

    Cat. No. D2000-49
    Designed and built to exceptional quality standards in a tradition spanning close to 160 years, these 9” high-leverage diagonal-cutting pliers feature an angled head, heavy-duty cutting knives and an extra inch of handle to provide additional leverage, reach and comfort on the job. Who knew an extra inch could make your job easier? Pick up this Klein tool and you will feel the difference.

    9'' High Leverage Side-Cutters New England

    Cat. No. D213-9NE
    Klein Tools makes some of the world's finest pliers. These High-Leverage, Side-Cutting Pliers features a rivet closer to the cutting edge which provides 46% more cutting and gripping power than other pliers. Induction hardened cutting knives are extra durable for longer life.

    9'' Pliers Heavy Duty Side Cutting

    Cat. No. J2000-9NE
    Klein Tools specializes in making some of the world's finest pliers. These High-Leverage Side-Cutting Pliers are built for heavy-duty cutting with induction hardened knives that are built to last. The high-leverage design provides 46% greater cutting and gripping power than other plier designs. The dual-material Journeyman handle makes these pliers tough and comfortable to use.

    9'' Side Cutters, New England, with Tether Ring

    Cat. No. D213-9NETT
    Falling objects is a common safety issue in the workplace. Falling tools are dangerous. Even a small object falling from a height can cause serious injury or damage.These side cutting pliers feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The high leverage design provides greater cutting and gripping power. Protect yourself, your equipment and others on the job site with Klein's high leverage side cutting pliers with tether ring.

    9/16'' Ship Auger Bit Screw Point 15'' L

    Cat. No. 53434
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    94-1/2'' Scaling Bar - Tubular Aluminum - Round

    Cat. No. 7SCT2400
    Klein Tools Tubular Aluminum Scaling bars are designed for use in the mining industry to pry overhanging rock. The aluminum tube body is lightweight which translates to less user fatigue. These scaling bars have a round shape.

    94-1/2'' Scaling Bar, Chrome Alloy Steel, Hexagon

    Cat. No. 7SC240019
    These Klein Tools Scaling Bars are forged from durable, chrome alloy steel. They are designed for use in the mining industry for prying overhanging rock. Scaling bars feature heat-treated blades for maximum toughness.

    94-1/2'' Scaling Bar, Tubular Aluminum, Hexagon

    Cat. No. 7SCTH2400
    Klein Tools Tubular Aluminum Scaling Bars are designed for use in the mining industry to pry overhanging rock. Its aluminum tube body means this scaling bar is lightweight which translates to less user fatigue. The hexagon shape of the bar provides better control.

    Accu-Bend Level

    Cat. No. 9317RE
    Use Klein Tool's Accu-Bend™ Level to ensure precise 90° bends and eliminate dog legs in conduit bends. The Accu-Bend™ Level has 3 points of contact for superior hold to conduit.

    ACCU-BEND™ Level, 4 Vial, REM

    Cat. No. 935AB4V
    Eliminate dog legs and make conduit bending easier with the help of Klein's ACCU-BEND Magnetic Level. Super strong rare-earth magnets are locked into the track of the level keeping it attached to the work piece. The thumb screw attaches level to conduit to measure angles while bending. Large top-view vial windows are easy to ready from a variety of angles. High-visibility orange makes this level easy to find on the job site.

    Adjustable PolyWeb Tool Belt

    Cat. No. 5225
    The Klein Tools Webbed-Polypropylene Adjustable Tool Belt is constructed of heavy-duty 2 in. W polypropylene webbing and fits waist sizes up to 48 in.

    Adjustable Wrench, Extra-Wide Jaw, 8-Inch

    Cat. No. D509-8
    Klein Tools' Extra-Wide Jaw Adjustable Wrench is designed to give you greater capacity in tight work spaces. This 8'' wrench features a 1-1/2'' jaw capacity, which is typically found on 12'' adjustable wrenches. The design also features a minimally protruding jaw shank that allows the jaw to open wider in confined work areas.

    Aerial Apron with Hot Stick Pocket

    Cat. No. 51829MHS
    Klein's Aerial Apron with Hot Stick Pocket and Magnet keeps your utility gear organized and portable. Easily attaches to your bucket. Includes a large pouch for hot stick and attachments.

    All Purpose Work Bucket

    Cat. No. 5109SLR
    Transfer your tools safely and securely with this all purpose work bucket. Made of heavy-duty canvas for long life. Load rated at 150 lbs (68 kg), the bucket features drain holes to keep your tools and bucket dry when working. .

    Aluminum Torpedo Level Rare Earth Magnet

    Cat. No. 935R
    This aluminum Torpedo level features a locking track to keep the powerful rare-earth magnets from falling out. This level has large, easy-to-read vials for measurements at 3 angles: level, 90 and 45 degrees. Top view vial view windows allow for easy reading from a variety of angles.

    Anchor Hook

    Cat. No. 258
    Klein's Heavy-Duty Anchor Hook is forged to slip under insulator and engage pin of cross arm. Sheaves are strong, yet lightweight aluminum alloy with all-bronze bushings. Rugged, durable design for the toughest job sites.

    Auto Coner, Winders Shear, 7''

    Cat. No. G507HC
    Extra long handles and short blades. Used in the textile industry when working with looms. Highly durable scissors that also provide a comfortable grip.

    Back Pocket Tool Pouch

    Cat. No. 5482
    This tool pouch fits in your back pocket for quick access to your tools. Open pockets on the front hold longer tools such as screwdrivers. Durable ballistic nylon will withstand the harshest abuse.

    Ball Peen Hammer Wooden Handle 24 oz.

    Cat. No. 5HBPH0.675
    Used in metal work for striking punches and chisels. Also used for riveting work with ball end. Head forged from tough high-tensile carbon manganese steel with hardened and tempered faces. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Correctly heat treated to best suit product application.

    Ball Peen Hammer Wooden Handle 32 oz.

    Cat. No. 5HBPH0.9
    Used in metal work for striking punches and chisels. Also used for riveting work with ball end. Head forged from tough high-tensile carbon manganese steel with hardened and tempered faces. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Correctly heat treated to best suit product application.

    Ball Peen Hammer Wooden Handle 40 oz.

    Cat. No. 5HBPH1.135
    Used in metal work for striking punches and chisels. Also used for riveting work with ball end. Head forged from tough high-tensile carbon manganese steel with hardened and tempered faces. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Correctly heat treated to best suit product application.

    Ball Peen Hammer Wooden Handle 48 oz.

    Cat. No. 5HBPH1.360
    Used in metal work for striking punches and chisels. Also used for riveting work with ball end. Head forged from tough high-tensile carbon manganese steel with hardened and tempered faces. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Correctly heat treated to best suit product application.

    Bandage Shear, 9-1/8''

    Cat. No. 720HC
    Ergo style professional bandage safety scissors. Chrome over nickel plated, curved handles give the operator high-leverage cutting, but comfort also! Hot forged carbon steel with anvil tip. This model is used by pro football teams, training rooms, EMT squads, and fire departments. Safety tips slip under bandages or clothing without injuring the skin.

    Barrel Drift - 3/4'' (19 mm)

    Cat. No. 5BD19
    Klein Tools Barrel Drifts are designed for aligning holes in construction. They can also be used for expanding holes in mild steel. The taper is forged, not turned, for greater tensile strength.

    Barrel Drift 1-19/64''

    Cat. No. 5BD33
    Klein Tools Barrel Drifts are designed for aligning holes in construction. They can also be used for expanding holes in mild steel. The taper is forged, not turned, for greater tensile strength.

    Barrel Drift 1-3/16''

    Cat. No. 5BD30
    Klein Tools Barrel Drifts are designed for aligning holes in construction. They can also be used for expanding holes in mild steel. The taper is forged, not turned, for greater tensile strength.

    Barrel Drift 25/32''

    Cat. No. 5BD20
    Klein Tools Barrel Drifts are designed for aligning holes in construction. They can also be used for expanding holes in mild steel. The taper is forged, not turned, for greater tensile strength.

    Bead Breaker Heavy Duty Slide Hammer

    Cat. No. 7BB124
    This Heavy-Duty Slide Hammer from Klein Tools is designed to be used for breaking beads on car and truck tires. This well-balanced heavy unit has the weight were it's needed most, in the striker. The high-tensile steel hexagon shaft provides excellent control.

    Bead Breaker Slide Hammer

    Cat. No. 5BB122
    Klein Tools Slide Hammer Bead Breaker is great for breaking beads on car and truck tires. This bead breaker is a well-balanced heavy unit with the weight in the striker, where it's needed most. The high-tensile steel hexagon shaft also provides excellent control.

    Bent Trimmer w/Blue Coating, 9''

    Cat. No. 209-BLU-P
    Bent, comfort grip handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground blades produce a sharp, clean, uniform cut. Chrome over nickel-plated blades resist corrosion and rust. Cuts heavy textiles, construction paper, cardboard, and plastics. Hot forged steel trimmer. Made in USA. Length of cut is 4 inches (101.6 mm). Overall length is 9-3/4 inches (247.7 mm). Weight is 0.56 pounds (0.25 kg).

    Bent Trimmer w/Large Bottom Ring, Blue Coating, 7''

    Cat. No. 206LR-P
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground blades produce a sharp, clean, uniform cut. Large coated handles provide added comfort and leverage. Chrome over nickel-plated blades resist corrosion and rust. Cuts heavy textiles, cardboard, wallpaper, plastic and rubber. Hot forged steel trimmer. Made in USA. Length of cut is 2-3/4 inches (69.9 mm). Overall length is 7-1/4 inches (184.2 mm). Weight is 0.24 pounds (0.11 kg).

    Bent Trimmer w/Large Ring, 11''

    Cat. No. 210LR-P
    Extra-long blades and large bow provide added leverage and comfort. Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground blades produce a sharp, clean, uniform cut. Chrome over nickel-plated blades resist corrosion and rust. Cuts industrial materials including roofing, rubber, vinyl, and heavy textiles. Hot forged steel trimmer. Made in USA. Length of cut is 4-3/4 inches(120.7 mm). Overall length is 11-1/4 inches (285.8 mm). Weight is 0.9 pounds (0.41 kg).

    Bent Trimmer w/Large Ring, 12''

    Cat. No. GP212LR
    Ergo style bent trimmer. Extra large bottom handle allows the operator to use all four fingers in handles. Added comfort, added leverage. 12-1/2 inches (317.5 mm) overall length; 6 inches (152.4 mm) cut length.

    Bent Trimmer w/Large Ring, Blue Coating, 9''

    Cat. No. 208LR-BLU-P
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground blades produce a sharp, clean, uniform cut. Large bow and coated handles provide added comfort and leverage. Chrome over nickel-plated blades resist corrosion and rust. Cuts heavy textiles, cardboard, wallpaper, plastic, and rubber. Hot forged steel trimmer. Made in USA. Length of cut is 3-1/2 inches (88.9 mm). Overall length is 9-1/8 inches (231.8 mm). Weight is 0.48 pounds (0.22 kg).

    Bent Trimmer w/Large Ring, Coated Handles, 10''

    Cat. No. G210LRBLU
    Ergo style bent trimmer. Extra large bottom handle allows the operator to use all four fingers in handles. Coated handles for added comfort. 11-1/4 inches (285.8 mm) overall length; 4-3/4 inches (120.7 mm) cut length.

    Bent Trimmer w/Large Ring, Coated Handles, 12''

    Cat. No. G212LRBLU
    Ergo style bent trimmer. Extra large bottom handle allows the operator to use all four fingers in handles. Coated handles for added comfort. 12-1/2 inches (317.5 mm) overall length; 6 inches (152.4 mm) cut length.

    Bent Trimmer w/Large Ring, Knife Edge, 11''

    Cat. No. G210LRK
    Ergo style bent trimmer with knife edge. Extra large bottom handle allows the operator to use all four fingers in handles. Added comfort, added leverage. 11-1/4'' (285.8 mm) overall length; 4-3/4 inches (120.7 mm) cut length.

    Bent Trimmer w/Large Ring, Knife Edge, 12''

    Cat. No. G212LRK
    Ergo style bent trimmer with knife edge. Extra large bottom handle allows the operator to use all four fingers in handles. Added comfort, added leverage. 12-1/2 inches (317.5 mm) overall length; 6 inches (152.4 mm) cut length.

    Bent Trimmer w/Ring, Extra Blunt, Serrated, 10''

    Cat. No. G8210LRXB
    Excellent for cutting Spectra, Kevlar, Dynema, and Vectran. Patented hard coat chrome increases the surface rockwell to 72C to help maintain edge life. Highly durable scissors that also provide a comfortable grip.

    Bent Trimmer, 8''

    Cat. No. G208
    Offset handles allow for easy, straight cutting on flat surfaces. Perfect for general fabric, dressmakers, and production work. Heritage trimmers are known for holding an edge through continuous use. Hot drop forged, chrome-plated. Power lock screw. 8-1/4 inches (209.6 mm) overall length; 3-1/2 inches (88.9 mm) cut length.

    Bent Trimmer, Fully Rounded Tips, 7''

    Cat. No. 208F
    Bent trimmer for table top cutting. Fully rounded tips for safety. Highly durable scissors that also provide a comfortable grip.

    Bent Trimmer, Knife Edge, 10''

    Cat. No. G210K
    10-3/8 inch (263.5 mm) bent trimmer with knife edge. Ideal for those big table top cutting jobs or upholstery and rubber roofing jobs.

    Bent Trimmer, Knife Edge, 8''

    Cat. No. 208K
    Bent trimmer for table top cutting. Knife edge makes fabric cutting easy. Highly durable scissors that also provide a comfortable grip.

    Bent Trimmer, Knife Edge, Blue Coated, 11-1/2''

    Cat. No. 211H
    Extra heavy duty model with blue cushion grip handles. This shear slices easily through carpet, canvas, rubber, leather, and multi-layers of material. 11-1/2 inches (292.1 mm) overall length; 4 inch(114.3 mm) cut length.

    Bent Trimmer, Large Ring, Blue Coating, 7''

    Cat. No. 206LR
    Ergo style bent trimmer. Extra large bottom handle allows the operator to use all four fingers in handles. Added comfort, added leverage. 7-1/4 inches (184.2 mm) overall length; 2-3/4 inches (69.9 mm) cut length.

    Bent Trimmer, Light Weight, Synth Handle, 8-1/4''

    Cat. No. 9208-P
    Ergonomic, versatile handles allow for easy right- or left-handed use. Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut.Cuts textiles, cardboard, plastic, and various craft material. Stainless Steel trimmer. Length of cut is 3-3/8 inches (85.7 mm). Overall length is 8-1/4 inches (209.6 mm). Weight is 0.22 pounds (0.10 kg).

    Bent Trimmer, Plastic Ambidex Handle, 8-1/4''

    Cat. No. 7210
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut. Locking nut and bolt design allows user to adjust blade tension maintaining optimum cutting performance. Versatile rings allow for right- or left-handed use. Cuts fabrics, paper, heavy textiles, construction paper, cardboard, and plastics. Stainless Steel trimmer. Length of cut is 3-3/8 inches (85.7 mm). Overall length is 8-1/4 inches (209.6 mm). Weight is 0.25 pounds (0.11 kg).

    Bent Trimmer, Plastic Ambidex Handle, SS, 8-7/8''

    Cat. No. G7220
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut.Versatile rings allow for right- or left-handed use. Cuts fabrics, paper, heavy textiles, construction paper, cardboard, and plastics. Stainless Steel trimmer. Length of cut is 3-3/8 inches (85.7 mm). Overall length is 8-7/8 inches (225.4 mm). Weight is 0.25 pounds (0.11 kg).

    Bent Trimmer, Plastic Ambidex Handle, SS, 8-7/8''

    Cat. No. G7220K
    Soft blue handle with extra large bottom ring that allows the operator to cut for long periods of time without the usual cramping of the hands! Can be used right- or left-handed.

    Bent Trimmer, XL Box, 11''

    Cat. No. G210LR
    Ergo style bent trimmer. Extra large bottom handle allows the operator to use all four fingers in handles. Added comfort, added leverage. 11-1/4 inches (285.8 mm) overall length; 4-3/4 inches (120.7 mm) cut length.

    Bent Trimmer, XL Plastic Ambidex Handle, 9-1/2''

    Cat. No. G7240
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut.Versatile rings allow for right- or left-handed use. Cuts fabrics, paper, heavy textiles, construction paper, cardboard; plastics. Stainless steel trimmer. Length of cut is 4'' (101.6 mm). Overall length is 9 1/2''. Weight is 0.26 pounds.

    Bent Trimmer, XL Plastic Ambidex Handle, 9-1/2''

    Cat. No. 7240-P
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut. Large bow provides a comfortable fit and added cutting leverage. Cuts heavy textiles, construction paper, cardboard and plastics. Stainless Steel trimmer. Length of cut is 4 inches (101.6 mm). Overall length is 9-1/2 inches (241.3 mm). Weight is 0.26 pounds (0.12 kg).

    Block and Tackle 258 Anchor Hook

    Cat. No. 1802-30
    These are NOT occupational protective hooks. NOT for human support. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Forged hook Cat. No. 258. All Klein block and tackle use high-quality, 3/8-Inch (10 mm) diameter rope.

    Block and Tackle 259 Anchor Hook Spliced

    Cat. No. 1802-30SSR
    Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Swivel hook Cat. No. 259. Hooks fit under insulator and engage pin on cross arm. 3/8-Inch (10 mm) diameter rope.

    Block and Tackle H268/H267 Blocks

    Cat. No. H1802-30
    These are NOT occupational protective hooks. NOT for human support. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Forged hook Cat. No. 258. All Klein block and tackle use high-quality, 3/8-Inch (10 mm) diameter rope.

    Block and Tackle Spliced to 268 Block

    Cat. No. 1802-30SR
    These are NOT occupational protective hooks. NOT for human support. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Forged hook Cat. No. 258. All Klein block and tackle use high-quality, 3/8-Inch (10 mm) diameter rope.

    Block and Tackle Spliced to H268 Block

    Cat. No. H1802-30SR
    All Klein block and tackle use high-quality, 3/8'' (10 mm) diameter rope. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. This package features two blocks with an anchor hook with a maximum safe load is 750 lbs. (340 kg).

    Block and Tackle with Guarded Snap/Hooks

    Cat. No. H1802-30SSR
    All Klein block and tackle use high-quality, 3/8'' (10 mm) diameter rope. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load.This package features two blocks with a swivel anchor hook with a maximum safe load is 750 lbs. (340 kg).

    Block and Tackle, 268 Block

    Cat. No. 1802-30S
    All Klein block and tackle use high-quality, 3/8'' (10 mm) diameter rope. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. This package features two blocks with a standard swivel anchor hook with a maximum safe load is 750 lbs. (340 kg).

    Block and Tackle, H268 Block

    Cat. No. H1802-30S
    These are NOT occupational protective hooks. NOT for human support. Light, galvanized-steel shell blocks are fitted with snubbing hooks to hold the load. Sheaves are strong yet lightweight aluminum alloy with all-bronze bushings. Swivel hook Cat. No. 259. All Klein block and tackle use high-quality, 3/8-Inch (10 mm) diameter rope.

    Block with Eye and Nose Extended Over Keeper

    Cat. No. H268
    This block features an eye to splice line to block and rope tie-off. Made of light galvanized steel and aluminum alloy. The sheaves have bronze bushings for long life.

    Block with Eye to Splice Line to Block

    Cat. No. 268
    This block features an eye to splice line to block and rope tie-off. Made of light galvanized steel and aluminum alloy. The sheaves have bronze bushings for long life.

    Block with Nose Extended Over Keeper

    Cat. No. H267
    Blocks without ropes and hooks. Made of light galvanized steel and aluminum alloy. Sheaves have bronze bushings.

    Bolt Retention Pouch, Canvas, 10''

    Cat. No. 5416TBR
    Klein's Bolt Retention canvas pouch helps keep 1/2'' and 1'' bolts and nuts safely inside for protection when working at height. Made of sturdy No. 4 canvas and a double bottom for long life. Two D-rings on the front for attaching tool tethers. Protect yourself and your coworkers with Klein's bolt retention pouch.

    Borescope

    Cat. No. ET510
    The Klein Tools Borescope is great at finding problem spots in hard-to-reach places. Use this tool's gooseneck camera to snake through drains, duct work, or any other inaccessible area. This borescope even comes with a bright LED worklight to help illuminate your work area.

    Brass Punch - 1'' (25 mm)

    Cat. No. 7BP29225
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 1'' (25 mm)

    Cat. No. 4BP25
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 1-1/4'' (32 mm)

    Cat. No. 7BP29232
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 1/2'' (13 mm)

    Cat. No. 4BP12
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 3/4'' (19 mm)

    Cat. No. 7BP29219
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 3/4'' (19 mm)

    Cat. No. 4BP19
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 3/8'' (10 mm)

    Cat. No. 4BP10
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punch - 5/8'' (16 mm)

    Cat. No. 4BP16
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Punches 5 Piece Set

    Cat. No. 4BPSET5
    Klein Tools' Brass Punches are designed for applications requiring a softer punch. Or more specifically, any situation where using a hardened punch may cause damage. The brass composition is specially selected for punch use.

    Brass Sledge Hammer - Fiberglass Rubber Grip Handle - 10 lbs. (4.5 kg)

    Cat. No. 7HBRFRH10
    This Sledge Hammer from Klein Tools features a brass head designed for use in non-sparking environments. The brass head also provides a softer, non-damaging blow. The comfortable, thick rubber grip handle provides better protection from shock and vibration.

    Brass Sledge Hammer - Fiberglass Rubber Grip Handle - 14 lbs. (6.4 kg)

    Cat. No. 7HBRFRH14
    This Sledge Hammer from Klein Tools features a brass head designed for use in non-sparking environments. The brass head also provides a softer, non-damaging blow. The comfortable, thick rubber grip handle provides better protection from shock and vibration.

    Brass Sledge Hammer - Fiberglass Rubber Grip Handle - 7 lbs. (3.2 kg)

    Cat. No. 7HBRFRH07
    This Sledge Hammer from Klein Tools features a brass head designed for use in non-sparking environments. The brass head also provides a softer, non-damaging blow. The comfortable, thick rubber grip handle provides better protection from shock and vibration.

    Brass Sledge Hammer, FGL Rubber Grip, 4 lbs.

    Cat. No. 7HBRFRH04
    This Sledge Hammer from Klein Tools features a brass head designed for use in non-sparking environments. The brass head also provides a softer, non-damaging blow. The comfortable, thick rubber grip handle provides better protection from shock and vibration.

    Break Apart Kitchen Shear, SS, 8''

    Cat. No. 758BA-P
    Hot forged 420 stainless steel, kitchen shear. Deep serration for no slip cutting. Easy take apart design and dishwasher safe.

    Bull-Pin/Bolt Bag with Drain Holes

    Cat. No. 5416TSR
    Klein's Bull-Pin and Bolt Bag holds two different bull pin sizes (1'' and 1-5/16''). Made of sturdy No. 4 canvas and a double bottom, this bag features drain holes at the bottom to release any built-up water. Tunnel loops fit belt widths up to 3'' (76 mm).

    Cable Splicer's Kit

    Cat. No. 46037
    Klein Tools' Cable Splicer's Kit contains a knife, pouch and Electrician's Scissors. The knife's textured handle provides a firm, comfortable grip. The pouch is riveted and stitched for extra durability. The Electrician's Scissors feature notches for stripping 19 AWG and 23 AWG.

    Cable Splicer's Knife, 6-1/2-Inch

    Cat. No. 44200
    Cable Splicers Knife. Special-purpose short blade with comfortable, full-sized, heavy-duty handle. Coping-type blade made of the finest cutlery steel, tough and carefully tempered to hold its edge. Handle is textured for comfort and firm grip. Hang hole for easy storage and portability.

    Carpet Napping Shear, Curved Handle, Blunt, 8''

    Cat. No. GP717CB
    A carpet mill must have. Enables flush trimming of carpet pile or cutting along baseboards. Curved handles and blunt tips Hot drop forged, chrome over nickel plated steel.

    Carpet Napping Shear, Curved, Coated Handle, 7-7/8''

    Cat. No. 717C
    Enables flush trimming of carpet pile or cutting along baseboards. Hot drop forged, chrome plated steel.Highly durable scissors that also provide a comfortable grip.

    Carpet Shear w/Ring, Curved, Coated Handle, 9''

    Cat. No. G718LRC
    Carpet shear features large ergo rings and offset handles for more powerful cutting and reduced fatigue. The offset handles make nap trimming easy. Hot drop forged chrome plated steel.

    Carrying Pouch for Flashlight

    Cat. No. 1106
    Keep your flashlight handy and safe with this durable carrying pouch. The carrier is made of Cordura® ballistic nylon for exceptional resistance to abrasions, punctures and tears. Easily attaches to belts up to 2'' (51 mm) wide.

    Center Punch Heavy Duty 5 Piece Set

    Cat. No. 4CPHDSET5
    Used to mark the centerpoint when drilling holes. Tough tool steel shaft for punching hard metals, including stainless steel. Precision ground point for easier marking. Knurled handle for gripping easily. Soft head for safety.

    Chipping Hammer Rubber Grip

    Cat. No. 5WHRG
    The Klein Tools Chipping Hammer is excellent for chipping off slag and splatter around welds. It can also be used as a miners' or geologists' tool. It features a comfortable rubber grip, and has excellent balance. The hardened ends are designed so that they won't flatten when chipping.

    Chipping Hammer Spring Grip

    Cat. No. 5WHSP
    The Klein Tools Chipping Hammer is excellent for chipping off slag and splatter around welds. It can also be used as a miners' or geologists' tool. It features a spring-style grip, and has excellent balance. The hardened ends are designed so that they won't flatten when chipping.

    Classic Klaw™ Pump Pliers, 10-Inch

    Cat. No. D504-10
    Unique jaw design provides multiple points of contact for maximum torque. Compact, narrow design for easy work in small or hard to reach spaces. Gripping surface with specially hardened teeth for reduced wear and positive grip. Extended grips for added comfort.

    Claw Hammer Wooden Handle 20 oz.

    Cat. No. 5HCLH0.575
    Used for general woodworking applications. Accurately ground claw for superior nail extraction. Head forged from tough high-tensile carbon manganese steel, with hardened and tempered face and claw. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Handle is fitted to head with a glued wooden and steel wedge assembly.

    Claw Hammer Wooden Handle 24 oz.

    Cat. No. 5HCLH0.675
    Used for general woodworking applications. Accurately ground claw for superior nail extraction. Head forged from tough high-tensile carbon manganese steel, with hardened and tempered face and claw. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Handle is fitted to head with a glued wooden and steel wedge assembly.

    Cleat Bar

    Cat. No. 7CL900
    The Klein Tools Cleat Bar is designed for removing rims from hubs on large earthmoving vehicles. This tool is forged from tough 4140 alloy steel for durability and long life. The finely ground ends provide increased productivity.

    Coax Cable Radial Stripper

    Cat. No. VDV110-095
    Klein Tools' Coax Combination Radial Stripper works on both standard and utility size cables. The durable, high-carbon steel cutting blades automatically adjusts to the different cable diameters. Klein's exclusive sliding depth gauge pre-measures cable for fast, accurate and repeatable stripping every time.

    Coax Cable Stripper 2-Level, Radial

    Cat. No. VDV110-061
    This cable stripper prepares multiple types of cable in common voice/data/video applications. It features an exclusive sliding depth gauge and variable stripping capability. The Klein Tools' coax cable radial stripper 2-level is made of high quality materials and construction for long-lasting results.

    Coax Explorer Plus Tester

    Cat. No. VDV512-058
    Low-voltage and high-tech, the Klein Tools VDV Coaxial Explorer Plus Tester helps professionals get the job done. It is designed to test continuity in coaxial cables. The tester also provides cable status with bright LED indicators.

    Coax Explorer Tester

    Cat. No. VDV512-057
    The Klein Tools Coax Explorer Tester allows you to test and verify coaxial cable connections. The compact, push-button function makes testing quick and easy. Batteries are included with the tester.

    Coax Explorer® 2 Tester

    Cat. No. VDV512-100
    The Klein Tools Coax Explorer® 2 verifies proper continuity of F-connector coaxial cables and maps their location. This tester comes with one (red) remote. The available color-coded remotes (sold separately) allow for up to four cables to be tested and mapped, displaying cable status via LED indicators - PASS, OPEN, or SHORT - that also identify the cable/remote location.

    Coax Explorer® 2 with Remote Kit

    Cat. No. VDV512-101
    The Klein Tools Coax Explorer® 2 verifies proper continuity of F-connector coaxial cables and maps their location. The color-coded remotes allow for up to four cables to be tested and mapped, displaying cable status via LED indicators - PASS, OPEN, or SHORT - that also identify the cable/remote location.

    Combination Radial Stripper

    Cat. No. VDV110-295
    Klein Tools Combination Radial Stripper works on both twisted pair and coaxial cables. The precision, high-carbon steelblades automatically adjust to twisted pair cable diameters and won't damage internal conductors. Consistent cuts won't nick the inner sheaths. Klein's exclusive sliding depth gauge pre-measures coax cable for fast, accurate and repeatable stripping every time.

    Compact Ratcheting ACSR Cable Cutter

    Cat. No. 63602
    Compact 10-1/4'' (260 mm) design allows for one-handed use of the ratcheting cutter mechanism, so other hand can position cable to ensure proper cut. High-Leverage ratchet mechanism for single-handed cutting of copper and aluminum cables, leaving no burrs or sharp edges. Patented two-step ratchet mechanism requires fewer strokes per cut. Quick release lever opens blades easily in every cutting postion. (Allows removal of the cable before completion of cut). Precision ratcheting mechanism holds cable tight and allows rapid, straight cuts with minimum effort.

    Compact Ratcheting Cable Cutter

    Cat. No. 63601
    Compact 10-1/4-Inch (260 mm) design allows for one-handed use of the ratcheting cutter mechanism, so other hand can position cable to ensure proper cut. High-Leverage ratchet mechanism for single-handed cutting of copper and aluminum cables, leaving no burrs or sharp edges. Patented two-step ratchet mechanism requires fewer strokes per cut. Quick release lever opens blades easily in every cutting postion. (Allows removal of the cable before completion of cut). Precision ratcheting mechanism holds cable tight and allows rapid, straight cuts with minimum effort.

    Compression Crimper

    Cat. No. VDV212-009
    Professional tool for CATV, Home Theater, Satellite and Security System applications where reliable high-volume F-Connector installation is required. Plunger tip can be adjusted to allow assembly of multiple compression F-Connectors. High strength cast aluminum body for long life. Lateral design with split jaw for easy insertion and removal of cable and connector. Universal plunger tip, factory preset and calibrated for varied connector types (see table).

    Compression Crimper - Vertical, Multi-Connector

    Cat. No. VDV211-007
    The vertical design of this compression crimper from Klein Tools allows for the easy adjustment, insertion, crimping and removal of cable and connector. Used in CATV, Home Theater, Satellite and Security System applications where multiple-type connector installations are required. The measuring guide beneath the plunger makes replicating the same compression setting efficient. The yellow and black contoured grips enhance comfort, visibility and allow quick identification. The spring loaded return increases user comfort and ease of use.

    Compression Crimper Compact

    Cat. No. VDV211-048
    The Klein Tools' compression crimper features an adjustable universal plunger that quickly and accurately crimps multiple types of compression connectors. User-friendly gauge markings indicate correct plunger positions saving you time and eliminating guesswork. An enhanced pivot point provides smooth wobble-free operation. This compact tool also has an integrated handle lock for easy storage.

    Copper Hammer Wooden Handle 1 lb.

    Cat. No. 5HCH01
    Klein Tools Copper Hammers are forged from pure electrolytic copper, so they are excellent for use in non-sparking environments. They can also be used to avoid damage to struck objects. This non-marking, soft-faced hammer does not contain oxygen, so unlike cast, it will not chip or break.

    Copper Hammer Wooden Handle 10 lbs.

    Cat. No. 7HCH10
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. These hammers are fitted with a tough Australian spotted gun hardwood handle, which is oiled for long life and user comfort.

    Copper Hammer Wooden Handle 14 lbs.

    Cat. No. 7HCH14
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. These hammers are fitted with a tough Australian spotted gun hardwood handle, which is oiled for long life and user comfort.

    Copper Hammer Wooden Handle 2 lbs.

    Cat. No. 5HCH02
    Used in non-sparking environments or to avoid damage to struck objects. Non-marking, soft-faced hammer. Forged from pure electrolytic copper. Contains no oxygen so, unlike cast, will not chip or break. Gives a dead blow - doesn't bounce.

    Copper Hammer Wooden Handle 3 lbs.

    Cat. No. 5HCH03
    Used in non-sparking environments or to avoid damage to struck objects. Non-marking, soft-faced hammer. Forged from pure electrolytic copper. Contains no oxygen so, unlike cast, will not chip or break. Gives a dead blow - doesn't bounce.

    Copper Hammer Wooden Handle 4 lbs.

    Cat. No. 5HCH04
    Used in non-sparking environments or to avoid damage to struck objects. Non-marking, soft-faced hammer. Forged from pure electrolytic copper. Contains no oxygen so, unlike cast, will not chip or break. Gives a dead blow - doesn't bounce.

    Copper Hammer Wooden Handle 7 lbs.

    Cat. No. 7HCH07
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. These hammers are fitted with a tough Australian spotted gun hardwood handle, which is oiled for long life and user comfort.

    Copper Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 7HCFRH07
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. The comfortable thick rubber grip provides better protection from shock and vibration.

    Copper Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 7HCFRH10
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. The comfortable thick rubber grip provides better protection from shock and vibration.

    Copper Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 7HCFRH14
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. The comfortable thick rubber grip provides better protection from shock and vibration.

    Copper Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 7HCFRH28
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. The comfortable thick rubber grip provides better protection from shock and vibration.

    Copper Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 7HCFRH04
    Klein Tools Copper Hammers are specially designed for use in non-sparking environments or to avoid damage to struck objects. The head is forged from pure electrolyic copper, which contains no oxygen, so unlike cast it will not chip or break. The comfortable thick rubber grip provides better protection from shock and vibration.

    Deluxe Canvas Tool Bag, 16-Inch

    Cat. No. 5102-16SP
    This deluxe canvas tool bag features lots of interior pockets to organize your tools. Made of heavy-duty canvas, this bag will stand the test of time. A detachable shoulder strap can be adjusted for a comfortable fit. With the moisture-resistant vinyl bottom and non-scratch studs on the base, you can put this bag down without worrying about wear and tear.

    Deluxe Canvas Tool Bag, 18-Inch

    Cat. No. 5102-18SP
    This deluxe canvas tool bag features lots of interior pockets to organize your tools. Made of heavy-duty canvas, this bag will stand the test of time. A detachable shoulder strap can be adjusted for a comfortable fit. With the moisture-resistant vinyl bottom and non-scratch studs on the base, you can put this bag down without worrying about wear and tear.

    Deluxe Canvas Tool Bag, 24-Inch

    Cat. No. 5102-24SP
    This deluxe canvas tool bag features lots of interior pockets to organize your tools. Made of heavy-duty canvas, this bag will stand the test of time. A detachable shoulder strap can be adjusted for a comfortable fit. With the moisture-resistant vinyl bottom and non-scratch studs on the base, you can put this bag down without worrying about wear and tear.

    Demolition Driver Set

    Cat. No. 32008
    Klein's Demolition Screwdrivers are engineered, manufactured and tested for prying and chiseling. The heat-treated metal shaft runs the complete length of the handle to the metal strike cap. This transfers the impact force directly to the work surface. In addition, the plated metal strike cap protects the handle from hammer blows. This set includes one Phillips #2 and one 1/4'' demolition screwdriver.

    Diagonal Cutting Pliers for Rebar Work

    Cat. No. D248-9ST
    Popular with Ironworkers, these diagonal-cutting pliers were designed for rebar work. The 13 degree angled head makes it easier to work in confined spaces while the hooked handle improves the grip and reduces slippage. The high-leverage design has 36% more cutting power. A hot-riveted joint ensures smooth action and no wobble in the handle. This pair will be your go-to tool when working with rebar.

    Diagonal Cutting Pliers, Rebar Work w/Tether Ring

    Cat. No. D248-9STT
    Falling objects is a common safety issue in the workplace. Falling tools are dangerous. Even a small object falling from a height can cause serious injury or damage. These ironworker's pliers feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The high leverage design provides greater cutting and gripping power. Protect yourself, your equipment and others on the job site with Klein's heavy duty diagonal cutting ironworker's pliers with tether ring.

    Digital Clamp Meter AC Auto-Ranging 600A

    Cat. No. CL600
    This automatically ranging true mean squared (TRMS) digital clamp-meter measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, and tests diodes via test-leads. Exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

    Digital Clamp Meter AC Auto-Ranging LoZ

    Cat. No. CL700
    Klein Tools CL700 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC current via the clamp, and measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters loaded with innovative, time-saving features.

    Digital Clamp Meter AC/DC Auto-Ranging

    Cat. No. CL800
    Klein Tools CL800 is an automatically ranging true root mean squared (TRMS) digital clamp-meter that measures AC/DC voltage, resistance, continuity, frequency, capacitance, and tests diodes via test-leads, and temperature via a thermocouple probe. It also features a Low Impedance (LoZ) mode for identifying and eliminating ghost or stray voltages. Klein Tools’ Test and Measurement product line was exclusively designed from the ground up by electricians for electricians. Years of field research, combined with extensive input from electricians across America, inspired the development of meters and electrical testers loaded with innovative, time-saving features.

    Double Hook Magnetic Tape Measure, 25-Foot

    Cat. No. 86225
    Klein Tools Tape Measures offer inventive first-rate features derived from jobsite professionals, to make jobs easier and more efficient. A magnetic double hook has a center top portion for hanging onto conduit right side up and upside down, while a 1-1/4 inch flared hook was designed specifically to pass-through 1-3/8 inch holes drilled for 1 inch conduit. This large magnet profile attaches to steel and along EMT conduit. A sealed tape brake panel is large enough to allow 2-3 fingers to operate at once for safe retraction, and keeps water and dirt out to prevent tape blade rust and degradation. The high impact rugged rubberized industrial design offers a better grip and stands up to any task the jobsite demands.

    Drill Hammer Wooden Handle 4.4 lbs.

    Cat. No. 5HDRH2.0
    Used for mining and confined environments. Also ideal for close work with enough head weight for effective hammering. Head forged from high-tensile carbon manganese steel, with hardened and tempered face and claw. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Handle is fitted to head with a glued wooden and steel wedge assembly.

    Dual Cartridge Radial Stripper

    Cat. No. VDV100-801-SEN
    Designed for high-volume, multiple-type cable preparation environments. Two ''active'' stripping cartridge-bays and third ''storage'' cartridge-bay. CAT/twisted pair/Ethernet and RG59, RG6/RG6Q cartridges included. One-piece construction ensures precise stripping that never needs adjustment with large finger loop that promotes smooth rotation during use. Cartridges snap in from both sides for left or right-handed operation.

    Dual Input Temperature Logger

    Cat. No. DTL302
    Two-input dual differential digital temperature tester offers logging, monitoring and uploading capabilities to help analyze system performance trends with the included software. The IP67: Waterproof, dust resistant rating means you can take it into harsh environments. Some other functions include Differential T1-T2 and Data Logging. Great for HVAC applications. Includes thermocouples, magnetic hanger strap, USB power adapter and batteries.

    Duckbill Napping Shear, 7''

    Cat. No. G548DR
    Patented, double large-ring napping shear with comfortable offset, blue coated handles. Knife edge blade makes for a clean, close cut every time! Chrome over nickel plated inside and out for double protection! Can be used left- or right-handed. 7 inches (177.8 mm) overall length, 1-7/8'' (47.6 mm) cut length.

    Electrician Scissor, Stripping Notches, Serrated

    Cat. No. G100CS
    These Electrician Scissors are nickel plated with wire stripping notches for 19 and 23 gauge wire. Blades hardened to 58C Rockwell for extra cutting life with serrations for holding wire while it cuts. High-quality blades produce a sharp, clean, uniform cut.

    Electrician's Scissors

    Cat. No. 2100-5
    For heavy-duty cutting jobs, the Klein Tools 5-1/4 in. Electrician Scissors are the ideal tool. Featuring a durable nickel-plated finish, these steel scissors resist corrosion for unhindered use.

    Electrician's Scissors, Nickel Plated

    Cat. No. 2100-7
    These Klein Tools Electrician's Scissors with stripping notches are made for telecom and electrical applications. They cut wire, cable and cordage including electrical communication 19 AWG and 23 AWG wire. The upper blade features wire stripping notches. The serrated lower blade allows for non-slip cutting action.

    Electrician's/HVAC TRMS Multimeter

    Cat. No. MM2300
    The Klein Tools MM2300 is a True RMS, auto-ranging multimeter. It measures AC/DC voltage, low impedance voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and temperature. It also tests diodes and continuity. Includes Klein case, thermocouple, test leads and batteries.

    Electricians Multimeter

    Cat. No. MM1000
    KleinTools'TestandMeasurementlinewasexclusivelydesignedfromthegroundup-byelectriciansforelectricians.This Klein Tools multimeter is great for both electrical and HVAC work! It measures both AC and DC current and voltage. It also features a Max/Min/Relative reading function for quick troubleshooting in the field. A data hold feature saves those measurements for later viewing.

    Electricians Scissors Stripping Notches

    Cat. No. 2100-9
    These Klein Tools Electrician's Scissors feature notches for stripping and serrations to reduce slipping when cutting. The strong, tempered steel construction helps ensure durability and sharpness. Cuts electrical communication wire, 19 AWG and 23 AWG.

    Electricians Tool Apron XL/2XL

    Cat. No. 42201
    Made of heavy duty canvas, this electrician's tool apron is riveted to assure long life. The apron features deep pockets to fit your tools and special pockets for writing utensils. Make this your go-to tool apron.

    Electricians Tool Set

    Cat. No. 5300
    The Klein Tools 12-Piece Electrician's Tool Set includes a variety of valuable tools for any professional or do-it-yourself electrician. The set includes 4 sets of pliers and 4 popular Cushion-Grip screwdriver sizes. It also comes with a tape measure, wire stripper, and convenient leather pouch and adjustable web belt to hold all of the tools.

    Electricians/HVAC Multimeter

    Cat. No. MM1300
    Klein Tools' Professional Series auto ranging multimeter measures AC/DC voltage, AC/DC current, resistance, capacitance, frequency, duty cycle, and temperature. Also tests diodes and continuity. Includes Klein case, thermocouple, test leads and battery.

    Electricians/HVAC TRMS Multimeter

    Cat. No. MM2000
    This Klein Tools Multimeter is great for both electrical and HVAC work! It measures both AC and DC current and voltage. It also features a Max/Min/Relative reading function for quick troubleshooting in the field, and a data hold feature that saves those measurements for later viewing.

    Electronic AC/DC Voltage Tester

    Cat. No. ET60
    ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. It is excellent choice for testing voltage in electrical circuits, at outlets, in light fixtures or anywhere else where AC/DC voltage testing is required.

    Electronic Voltage Tester

    Cat. No. ET50
    The Klein Tools Voltage Tester tests AC and DC voltages from 120 - 600 volts using light and vibration to indicate voltage. The solid state design is safer than solenoid testers. This tester was designed by electricians for electricians and features an LED display and an automatic shutoff to help preserve battery life. It tests for low impedance to limit false readings and comes with 3 AAA alkaline batteries.

    Electronic Voltage Tester

    Cat. No. ET100
    Measures AC and DC Voltage at nine common levels up to 600 Volts. Bright LEDs indicate voltage reading without batteris installed. Permanently secured test leads are always there when they are needed.

    Electronic Voltage/Continuity Tester

    Cat. No. ET200
    Designed by electricians for electricians, the Klein Tools Electronic Voltage Tester measures AC and DC voltage at nine common levels up to 600V. This tester doesn't even need batteries to indicate these voltage readings. It also has low impedance input to reduce the possibility of ghost voltages.

    Embroidery Scissor w/Large Ring, 4''

    Cat. No. G404LR
    These extra sharp scissors have a Rockwell of 56-58, making them ideal for embroidery, sewing, fabric, electronics, and many other industries. Sharp/Sharp Tips. Large Rings. Chrome over nickel plated for added protection. 4-1/2 inches (114.3 mm) overall length; 1-1/2 inches (38.1 mm) cut length.

    Embroidery Scissor w/Large Ring, 5''

    Cat. No. G405LR
    These extra sharp scissors have a Rockwell of 56-58, making them ideal for embroidery, sewing, fabric, electronics, and many other industries. Sharp/Sharp Tips. Large Rings. Chrome over nickel plated for added protection. 5-1/8'' (130.2 mm) overall length; 2-1/8 inches (54.0 mm) cut length.

    Embroidery Scissor, 4-1/2''

    Cat. No. G104HC
    Hot forged, high carbon steel scissor. Excellent for filaments, crafts, lab work and man made fiber. Highly durable scissors that also provide a comfortable grip.

    Embroidery Scissor, Fine Points, Curved Blade, 3-1/2''

    Cat. No. G103C
    Hot forged, high carbon steel with fine points and curved blades. Highly durable scissors that also provide a comfortable grip. For use with both left and right hand.

    Embroidery, Curved Blade, 4-3/8''

    Cat. No. G104C
    Hot forged, high carbon steel scissor. Curved blades and long handles make this tool exceptional for cutting wire, light rubber flashing in tight areas. Excellent for filaments, crafts, lab work and man made fiber.

    Flexible AC Current Clamp Meter

    Cat. No. CL150
    This easy to use, stand-alone meter features an 18-inch flexible clamp that allows access into panels and hard to reach areas (bundled wires, awkward conductors, and PLC cabinets). True RMS readings with CATIV 600V or CATIII 1000V safety rating. Features backlit LCD display, auto-power off after 15 minutes, Max/Min, Hold, Auto-Ranging and Low Battery icons.

    Folding Jab Saw

    Cat. No. 31737
    Carrying a jab saw can rip or tear your tool bag. With Klein Tools Folding Jab Saw, there’s no need for taped-up, homemade sheaths or big holes in your tool pouch. The fast cutting carbon steel blade is as sturdy as a fixed blade saw, but folds smartly into the comfort-grip handle. The lockback mechanism secures the blade at a full 180 degrees and also at a 125 degrees for those hard to reach spots.

    Free-Fall Snip Stainless Steel

    Cat. No. 2100-8
    The Klein Tools Electrician's Scissors are made of tough tempered steel and feature a free-fall snip design for greater ease of use. The extended handle allows for more comfortable cutting and provides leverage. Cuts 19 and 23 AWG electrical communication wire.

    Golden Tri-Cut Blades, 10-pk

    Cat. No. 1200BI-P
    Save time with Klein's Golden Tri-Cut™ Blades featuring three teeth sizes in one blade. These replacement blades work with Klein's Dual-Purpose Hacksaw (Cat. No. 701-S). The gold finish provides premium cutting that won't dull.

    Golden Tri-Cut Blades, 100-pk

    Cat. No. 1200BI
    The Klein Tools Golden Tri-Cut Hacksaw Blades (100-Pack) feature 3 teeth sizes on 1 blade. These hacksaw blades are ideal for general-purpose cutting.

    Hard-Body Oval Bucket with Kickstand

    Cat. No. 5144BHB
    Transfer your tools safely and securely with this all-purpose work bucket. Orange, non-conductive plastic exterior maintains bucket shape. This lineman bucket features 15 pockets to keep your tools organized and secure.

    HD Carpet Shear w/Ring, Curved, Blunt, 9''

    Cat. No. G718LRCB
    A carpet mill must have. Enables flush trimming of carpet pile or cutting along baseboards. Curved handles and blunt tips. Hot drop forged, chrome over nickel plated steel. Blunt tips.

    Heavy Duty Bandage Shears

    Cat. No. 720-P
    Blunt safety tip slips under bandages or clothing without injuring the skin. Precision ground blades produce a sharp, clean, uniform cut. Ergonomic handle provides comfort and added leverage. Chrome over nickel-plated blades resist corrosion and rust. Cuts clothing, gauze, tape, bandages, and band-aids. Hot forged steel shears. Made in USA. Length of cut is 3 inches (76.2 mm) . Overall length is 9-1/8 inches (231.8 mm). Weight is 0.48 pounds (0.22 kg).

    Heavy Duty Bent Trimmer, 11''

    Cat. No. 7310-P
    Extra-long blades and versatile rings cut more in one motion and provide greater comfort. Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut. Cuts heavy textiles, construction paper, cardboard, plastics, and multiple layers of fabric. Stainless Steel trimmer. Length of cut is 4-3/4 inches (120.7 mm) . Overall length is 11 inches (279.4 mm). Weight is 0.49 pounds (0.22 kg).

    Heavy Duty Bent Trimmer, 11''

    Cat. No. 7310
    Soft blue handle with extra large bottom ring that allows the operator to cut for long periods of time without the usual cramping of the hands! Can be used right or left handed. Highly durable scissors that also provide a comfortable grip.

    Heavy Duty Cutting Rebar Work Pliers

    Cat. No. D2000-9ST
    The aggressive teeth on knurl of these Ironworker's Pliers provide a strong grip to easily twist and cut soft annealed rebar tire wire. 2000 Series knives cut ACSR, screws, nails and most hardened wire. The high-leverage design provides 46% greater cutting and gripping power than other plier designs. The head is precision-hardened for on-the-job toughness.

    Heavy Duty Sharp Point Scissors

    Cat. No. 435
    These extra sharp heavy duty scissors have a Rockwell of 56-58, making them ideal for embroidery, sewing, fabric, electronics, and many other industries. Sharp/Sharp Tips. Chrome over nickel plated for added protection. 5-1/2 inches (139.7 mm) overall length; 2 inches (50.8 mm) cut length.

    Heavy Duty Shear w/Ball Point, 8-7/8''

    Cat. No. G718BP
    Forged - not soldered - ball point for poultry venting. High leverage, regular size handle, Chrome over nickel plated. 8-7/8 inches (225.4 mm) overall length; 3 inches (76.2 mm) cut length.

    Heavy Duty Shear w/Large Ring, 8-5/8''

    Cat. No. 718LR
    This shear is one of the most widely used in the market. Excellent for cutting a wide variety of material including fabric, rubber, poultry, light metal, and light wire.

    Heavy Duty Shear w/Large Ring, Ball Tips, 9-1/8''

    Cat. No. 718LRBP
    Forged - not soldered - ball point for poultry venting. High leverage with large ergonomic handle to reduce strain! Chrome over nickel plated. 9-1/8 inch(231.8 mm) overall length; 2-7/8 inches (73.0 mm) cut length.

    Heavy Duty Shear, 8-5/8''

    Cat. No. 718LR-P
    Extra-large bow allows for gloved use and long shank adds cutting leverage. Precision ground blades produce a sharp, clean, uniform cut. Chrome over nickel-plated blades resist corrosion and rust. Cuts fabric, rubber, and felt. Hot forged steel shears. Made in USA. Length of cut is 3 inches (76.2 mm). Overall length is 9 inches(228.6 mm). Weight is 0.48 pounds (0.22 kg).

    Heavy Duty Shear, Curved Handle, Blunt Tip, 8-5/8''

    Cat. No. GP718CB
    A carpet mill must have. Enables flush trimming of carpet pile or cutting along baseboards. Curved handles and blunt tips Hot drop forged, chrome over nickel plated steel.

    Heavy Duty Top Closing Bucket, 17''

    Cat. No. 5104CLR17
    Keep your tools safe and protected with Klein's Heavy Duty Top Closing Buckets. The top zips closed to prevent falling objects. Load rated for up 150 lbs (68 kg), this roomy bucket holds all the necessary tools required to get the job done. Heavy-duty No. 1 canvas body with leather reinforced bottom withstands the harshest job sites.

    Heavy Duty Top Closing Bucket, 22-Inch

    Cat. No. 5104CLR22
    Keep your tools safe and protected with Klein's Heavy Duty Top Closing Buckets. The top zips closed to prevent falling objects. Load rated for up 150 lbs (68 kg), this roomy bucket holds all the necessary tools required to get the job done. Heavy-duty No. 1 canvas body with leather reinforced bottom withstands the harshest job sites.

    Heavy Duty Utility Shear, 8-5/8''

    Cat. No. G718HC
    This shear is one of the most widely used on the market. Excellent for cutting a wide variety of material including fabric, rubber, poultry, light metal, and light wire.

    Heavy-Duty Snap Hook

    Cat. No. 455
    Klein's Heavy-Duty Snap Hook snaps on with one hand. Sheaves are strong, yet lightweight aluminum alloy with all-bronze bushings. Rugged, durable design for the toughest job sites.

    Heritage 8-3/8'' SS Bent Trimmer, Plastic Handle

    Cat. No. 7210-P
    Bent handles glide smoothly along flat surfaces and reduce strain on wrist. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut.Versatile rings allow for right- or left-handed use. Cuts fabrics, paper, heavy textiles, construction paper, cardboard, and plastics. Stainless Steel trimmer. Length of cut is 3-3/8 inches (85.7 mm). Overall length is 8-3/8 inches (212.7 mm). Weight is 0.24 pounds (0.11 kg).

    Heritage 8-7/8'' Bandage Shear

    Cat. No. 721-P
    Anvil safety tip slips under bandages or clothing without injuring the skin. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut. Lightweight design for ease of use and reduced fatigue. Ergonomic handle provides comfort. Cuts clothing, gauze, tape, bandages, and band-aids. Stainless Steel shears. Length of cut is 3 inches (76.2 mm) . Overall length is 8-7/8 inches (225.4 mm). Weight is 0.25 pounds (0.11 kg).

    Hexagon Crowbar 59'' x 1''

    Cat. No. 5CB150025
    Klein Tools crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Crowbar 59'' x 1-3/16''

    Cat. No. 5CB150030
    Klein Tools Crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Crowbar 65'' x 1''

    Cat. No. 5CB165025
    Klein Tools Crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Crowbar 65'' x 1-3/16''

    Cat. No. 5CB165030
    Klein Tools Crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Crowbar 71'' x 1''

    Cat. No. 5CB180025
    Klein Tools Crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Crowbar 71'' x 1-3/16''

    Cat. No. 5CB180030
    Klein Tools Crowbars feature a hexagon bar profile that provides greater control when digging holes and breaking clay, rock and concrete. The ground and sharpened diamond point end makes it easier to dig and break concrete. Both ends are heat treated for better performance and strength.

    Hexagon Gooseneck Bar 71'' x 1-3/16''

    Cat. No. 5GNB180030
    Klein Tools Hexagon Gooseneck Bar uses a life and swivel motion for levering and moving objects into place. It features both a diamond point and a gooseneck end for more flexibility in use. It also has a hexagon bar profile for greater control.

    Hexagon Pinch Bar 18'' x 5/8''

    Cat. No. 5PB45016
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 24'' x 1''

    Cat. No. 5PB60025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 24'' x 25/32''

    Cat. No. 5PB60020
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 30'' x 1''

    Cat. No. 5PB75025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 36 x 1''

    Cat. No. 5PB90025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 59'' x 1''

    Cat. No. 5PB150025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 59'' x 1-3/16''

    Cat. No. 5PB150030
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 65'' x 1''

    Cat. No. 5PB165025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 65'' x 1-3/16''

    Cat. No. 5PB165030
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 71'' x 1''

    Cat. No. 5PB180025
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    Hexagon Pinch Bar 71'' x 1-3/16''

    Cat. No. 5PB180030
    Used to lever and move objects into place with a lift and swivel motion. The hexagonal bar profile gives greater control and reduces bar roll. Forged from high-tensile carbon manganese steel for maximum strength. The heel is offset to 40° angle for optimum lifting.

    High Dexterity Touchscreen Gloves, L

    Cat. No. 40230
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these high-dexterity touchscreen gloves provide protection, dexterity and extreme functionality. With touchscreen capabilities on the entire palm, all fingers and first knuckles, switching between smartphone work and light-duty tasks is seamless.

    High Dexterity Touchscreen Gloves, M

    Cat. No. 40229
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these high-dexterity touchscreen gloves provide protection, dexterity and extreme functionality. With touchscreen capabilities on the entire palm, all fingers and first knuckles, switching between smartphone work and light-duty tasks is seamless.

    High Dexterity Touchscreen Gloves, XL

    Cat. No. 40231
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these high-dexterity touchscreen gloves provide protection, dexterity and extreme functionality. With touchscreen capabilities on the entire palm, all fingers and first knuckles, switching between smartphone work and light-duty tasks is seamless.

    High Leverage Diagonal-Cutters with Ring

    Cat. No. D228-8TT
    These high leverage diagonal cutters feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The rivet is closer to the cutting edge for greater cutting power while the angled head design allows for easy access in confined spaces. Short jaws and beveled cutting edges allow close cutting of wire. Protect yourself, your equipment and others on the job site with Klein's heavy duty diagonal cutting pliers with tether ring.

    High Leverage Ironworker's Pliers

    Cat. No. D213-9ST
    Twists and cuts soft annealed rebar tie wire. High-leverage design. Rivet is closer to the cutting edge for 46-percent greater cutting and gripping power than other plier designs. Hook bend handle. Spring-loaded action for self-opening. Induction hardened cutting knives for long life.

    Hybrid Pliers

    Cat. No. J215-8CR
    Strip, cut, twist, shear and crimp with one tool! With full length, induction hardened knives and a high-leverage design, these hybrid pliers provide more cutting power on hard wire. It easily strips 10-14 AWG solid and 12-16 stranded wire. The wide, knurled head easily grabs and twists wires. Convenient holes for shearing 6-32 and 8-32 bolts plus a crimper for non-insulated connectors, lugs and terminals make this a must-have tool for your bag.

    Illuminated Fish Rod Tip

    Cat. No. 56119
    Easily locate fish rod end in dark spaces. The illuminated fish rod tip from Klein Tools lights up for maximum visibility. You'll enjoy long life from the bright white, omni-directional LED light. The tapered end makes for easy pushing and pulling while the hook or bullet nose attachments fit smoothly into the threaded top.

    Impact Punchdown Tool

    Cat. No. VDV427013SEN
    The Klein VDV427-013 Punch down Tool Frame terminates cable in a variety of cross-connect panels, blocks and keystone jacks. It is spring-loaded for fast, low effort seating and terminating. Selectable (Hi/Low) impact-force settings meet industry standard specification 8762D. Does not include tool blade.

    Impact Socket Adapter for NRHD

    Cat. No. NRHDA
    Klein Tools' Impact Socket Adapter is a must-have for lineman and utility workers. It features an improved ball detent which stays in the socket better and has greater separation force. When combined with Klein Tools' Impact Socket, it provides even more versatility with four available socket sizes to work with.

    Impact Socket Adapter Transmission

    Cat. No. NRHDA2
    Klein Tools' Impact Socket Adapter is a must-have for lineman and utility workers. It features an improved ball detent which stays in the socket better and has greater separation force. When combined with Klein Tools' Impact Socket, it provides even more versatility with four available socket sizes to work with.

    Insulated Wire Stripper/Cutter

    Cat. No. 11054-EINS
    Klein Tools Electrician's Insulated Solid and Stranded Stripper is 1000V rated and VDE certified for safety on the job. The multi-color, sleek design with small thumbguards make for easy handling and storage. The three-part insulation with white underlayer provides a warning sign that insulation may be compromised. The durable, molded insulation meets or exceeds IEC 60900 and ASTM F1505 standards for insulated tools.

    Ironworker's Pliers Heavy Duty Cutting

    Cat. No. D2000-7CST
    These Ironworker's Pliers twist and snip soft annealed rebar tie wire and cut ACSR, screws, nails and most hardened wire. The knurled jaws aid in easy twisting and turning. Hook-bend in the handle provides added grip and leverage. Unique handle tempering helps absorb the ''snap'' when cutting wire.

    Ironworker's Work Pliers, 9'' with Spring

    Cat. No. D201-7CST
    Cut and twist rebar tie wire with Klein Tools 9-1/4 in. Ironworker's Pliers. They feature knurled jaws for a good grip and a spring-loaded design which enables self-opening.

    Jab Saw

    Cat. No. 725
    Klein Tools' Key Hole Saw is designed with the professional user in mind. The rugged, heavy-duty Hole Saw provides superior results with less effort. A curved front-end design allows for comfortable, two-hand use.

    Journeyman Camouflage Gloves, size L

    Cat. No. 40209
    The Klein Tools Journeyman Camouflage Gloves utilize synthetic leather in the palm and fingertips, extending the life of the glove while providing optimum dexterity. Form-fitting TrekDry™ material with Mossy Oak® Break-Up® Infinity™ camouflage helps keep your hands cool, dry and comfortable.

    Journeyman Camouflage Gloves, size M

    Cat. No. 40208
    The Klein Tools Journeyman Camouflage Gloves utilize synthetic leather in the palm and fingertips, extending the life of the glove while providing optimum dexterity. Form-fitting TrekDry™ material with Mossy Oak® Break-Up® Infinity™ camouflage helps keep your hands cool, dry and comfortable.

    Journeyman Camouflage Gloves, size XL

    Cat. No. 40210
    The Klein Tools Journeyman Camouflage Gloves utilize synthetic leather in the palm and fingertips, extending the life of the glove while providing optimum dexterity. Form-fitting TrekDry™ material with Mossy Oak® Break-Up® Infinity™ camouflage helps keep your hands cool, dry and comfortable.

    Journeyman Cold Weather Pro Gloves, L

    Cat. No. 40212
    The Klein Tools Journeyman Cold Weather Pro Gloves will keep your hands warm but won't slow you down. Strategically placed Thinsulate™ thermal insulation, rubberized palm, nylon back, and EVA foam padding offers tradespeople great protection and comfort. Molded rubber closure with hook and loop secures fit.

    Journeyman Cold Weather Pro Gloves, M

    Cat. No. 40211
    The Klein Tools Journeyman Cold Weather Pro Gloves will keep your hands warm but won't slow you down. Strategically placed Thinsulate™ thermal insulation, rubberized palm, nylon back, and EVA foam padding offers tradespeople great protection and comfort. Molded rubber closure with hook and loop secures fit.

    Journeyman Cold Weather Pro Gloves, XL

    Cat. No. 40213
    The Klein Tools Journeyman Cold Weather Pro Gloves will keep your hands warm but won't slow you down. Strategically placed Thinsulate™ thermal insulation, rubberized palm, nylon back, and EVA foam padding offers tradespeople great protection and comfort. Molded rubber closure with hook and loop secures fit.

    Journeyman Cut 5 Resistant Gloves, L

    Cat. No. 40224
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these CE Cut Level 5 gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Cut 5 Resistant Gloves, XL

    Cat. No. 40225
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these CE Cut Level 5 gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Extreme Gloves, L

    Cat. No. 40218
    The Klein Tools Journeyman Extreme Gloves offer ample protection and comfort. Flexible Thermal Plastic Rubber (TPR) and EVA foam impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. D30® padding material in the palm absorbs impact. Great for demolition work. Wrist closure with hook and loop secures fit.

    Journeyman Extreme Gloves, M

    Cat. No. 40217
    The Klein Tools Journeyman Extreme Gloves offer ample protection and comfort. Flexible Thermal Plastic Rubber (TPR) and EVA foam impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. D30® padding material in the palm absorbs impact. Great for demolition work. Wrist closure with hook and loop secures fit.

    Journeyman Extreme Gloves, XL

    Cat. No. 40219
    The Klein Tools Journeyman Extreme Gloves offer ample protection and comfort. Flexible Thermal Plastic Rubber (TPR) and EVA foam impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. D30® padding material in the palm absorbs impact. Great for demolition work. Wrist closure with hook and loop secures fit.

    Journeyman Grip Gloves, L

    Cat. No. 40215
    The Klein Tools Journeyman Grip glove offers protection and ample gripping capability in wet and dry conditions. D30® padding material in the palm absorbs impact. Great for wire pulling. Neoprene cuff and soft molded rubber closure with hook and look secures fit.

    Journeyman Grip Gloves, M

    Cat. No. 40214
    The Klein Tools Journeyman Grip glove offers protection and ample gripping capability in wet and dry conditions. D30® padding material in the palm absorbs impact. Great for wire pulling. Neoprene cuff and soft molded rubber closure with hook and look secures fit.

    Journeyman Grip Gloves, XL

    Cat. No. 40216
    The Klein Tools Journeyman Grip glove offers protection and ample gripping capability in wet and dry conditions. D30® padding material in the palm absorbs impact. Great for wire pulling. Neoprene cuff and soft molded rubber closure with hook and look secures fit.

    Journeyman Leather Gloves, L

    Cat. No. 40221
    The Klein Tools Journeyman Leather gloves are premium, genuine professional grade leather work gloves. The leather palm features padding for comfort and leather reinforced fingertips for added durability. Flexible Thermal Plastic Rubber (TPR) impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. Machine wash and dry.

    Journeyman Leather Gloves, M

    Cat. No. 40220
    The Klein Tools Journeyman Leather gloves are premium, genuine professional grade leather work gloves. The leather palm features padding for comfort and leather reinforced fingertips for added durability. Flexible Thermal Plastic Rubber (TPR) impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. Machine wash and dry.

    Journeyman Leather Gloves, XL

    Cat. No. 40222
    The Klein Tools Journeyman Leather gloves are premium, genuine professional grade leather work gloves. The leather palm features padding for comfort and leather reinforced fingertips for added durability. Flexible Thermal Plastic Rubber (TPR) impact protection disperses damaging blows while two-way stretch Spandex lets the cool air in when the heat is on. Machine wash and dry.

    Journeyman Leather Utility Gloves, M

    Cat. No. 40226
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these leather utility gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Leather Utility Gloves, L

    Cat. No. 40227
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these leather utility gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Leather Utility Gloves, XL

    Cat. No. 40228
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these leather utility gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Utility Gloves, size L

    Cat. No. 40206
    The Klein Tools Journeyman Utility glove is a hi-tech update to one of the best-selling gloves. Form-fitting stretch panels between your fingers provide a snug fit and the elastic cuff offers easy on and off flexibility between tasks. The anatomically designed palm eliminates material bunching for an exceptional fit. Your hands will stay cool, dry and comfortable with TrekDry™ material covering your wrist, thumb and fingers.

    Journeyman Utility Gloves, size M

    Cat. No. 40205
    The Klein Tools Journeyman Utility glove is a hi-tech update to one of the best-selling gloves. Form-fitting stretch panels between your fingers provide a snug fit and the elastic cuff offers easy on and off flexibility between tasks. The anatomically designed palm eliminates material bunching for an exceptional fit. Your hands will stay cool, dry and comfortable with TrekDry™ material covering your wrist, thumb and fingers.

    Journeyman Utility Gloves, size XL

    Cat. No. 40207
    The Klein Tools Journeyman Utility glove is a hi-tech update to one of the best-selling gloves. Form-fitting stretch panels between your fingers provide a snug fit and the elastic cuff offers easy on and off flexibility between tasks. The anatomically designed palm eliminates material bunching for an exceptional fit. Your hands will stay cool, dry and comfortable with TrekDry™ material covering your wrist, thumb and fingers.

    Journeyman Wire Pulling Gloves, L

    Cat. No. 40233
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these wire pulling gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Wire Pulling Gloves, M

    Cat. No. 40232
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these wire pulling gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman Wire Pulling Gloves, XL

    Cat. No. 40234
    Klein Tools iconic Journeyman gloves are designed for today's jobsite demands. Constructed of the latest high-quality high-tech materials available, these wire pulling gloves provide protection, dexterity and extreme functionality on and off the jobsite.

    Journeyman™ Pump Pliers, 10''

    Cat. No. J502-10
    Klein Tools 10'' (254 mm) Pump Pliers feature a secure tongue and groove design for a non-slip grip even when heavy pressure is applied. Tension-loaded joint reduces handle wobble for sure gripping. The dual-material Journeyman handle is also designed for better grip and comfort.

    K-Type Temperature Pipe Clamp

    Cat. No. 69140
    Specific for HVAC applications, this Temperature Pipe Clamp (and other Klein K-Type Accessories) extend working temperature ranges for Klein’s HVAC Digital Multimeters and Clamp Meters.These accessories work with all Klein digital multimeters and clamp meters that measure temperature, as well as any other brand with meters that measure temperature. Other accessories include High Temperature Thermocouple Wire, Temperature Probe and Banana Plug Adapter.

    Klein Tools 'State of the Industry' Survey Finds 'Made in U.S.A.' As Important Purchase Driver

    Klein® Tools ‘State of the Industry’ Survey Finds Union Members More Likely than Non-union Members to Rank 'Made in U.S.A.' as Important Purchase Driver Survey also finds five in six electricians cited performance and durability as the most important factors in a tool purchase  July 22, 2015 (Lincolnshire, IL) – Klein Tools (http://www.kleintools.com), for professionals since 1857...

    Klein Tools Acquires General Machine Products Co. in Trevose, Penn.

    Company continues to invest in U.S. manufacturing June 7, 2017 (Lincolnshire, Ill.) – Klein Tools today announced the acquisition of the General Machine Products Company (GMP) business based in Trevose, Pennsylvania. Klein Tools acquired substantially all of the business assets of GMP, with no further specifics of the asset transaction terms disclosed. GMP, a third-generation business owned an...

    Klein Tools Expands Its High-Visibility Tool Line

    Drivers now available with glow-in-the-dark handles November 18, 2015 (Lincolnshire, IL) – Klein Tools (http://www.kleintools.com), for professionals since 1857, expands its popular line of high-visibility (Hi-Viz) tools to include three new driver products. The Hi-Viz drivers features Klein’s exclusive glow-in-the-dark handles to easily locate tools in the dark or dimly lit places. ...

    Klein Tools’® Expansion to Test and Measurement Line Broadens Applications for HVAC Professionals

    June 13, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the HVAC Clamp Meter with Differential Temperature (CL450) as well as multiple new K-Type Temperature Accessories. The CL450 provides accurate measurements of DC microamps, differential temperature, inrush current and more. Meanwhile, the available K-Type accessories help extend workin...

    Klein Tools’® New 7-in-1 Nut Driver Delivers Increased Torque for Tough Jobs

    June 14, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the 7-in-1 Nut Driver, which provides easy, one-handed driving and seven sizes in one tool. This heavy-duty, multi-nut driver exceeds the toque performance of standard nut drivers, delivering more power for the tough jobs tradespeople face every day. 7-in-1 Nut Driver (Cat. No. 3280...

    Klein-Kurve® Dual NM Cable Stripper/Cutter

    Cat. No. K1412
    The Klein-Kurve Dual NM Cable Stripper/Cutter allows you to cleanly remove the outer jacket of 12/2 and 14/2 Type NM-B non-metallic sheathed cable. Stripping holes easily remove the insulation on 12 and 14 AWG solid wire. Precision shear-type blades provide square clean cuts on solid copper wire. Curved handles with double-dipped grips makes this stripper/cutter comfortable to use every day.

    Klein-Kurve® Dual NMD-90 Cable Stripper/Cutter

    Cat. No. K1412CAN
    This Klein Tools Wire Stripper is designed specifically for our Canadian customers! It is designed to quickly strip the outer jacket of NMD-90 cable. It can also strip and cut 12-14 AWG solid and 14-16 AWG stranded wire.

    Klein-Kurve® Heavy Duty Wire Stripper 8 to 18 AWG

    Cat. No. K12054
    Klein's Heavy-Duty Wire Stripper provides durable wire cutting, stripping and twisting plus bolt shearing in one tool. 4X stronger than existing Klein wire strippers. The forged design delivers a professional level tool you expect from Klein. Easily twists three wires and cleanly strips both solid and stranded wire.

    Klein-Kurve® Heavy-Duty Wire Stripper 10 to 20 AWG

    Cat. No. K12055
    Klein's heavy-duty wire stripper is built with the durability of pliers and the sharpness and precision of a wire stripper. This American-made tool provides durable wire cutting, stripping and twisting plus bolt shearing in one tool. Four times (4X) stronger than traditional Klein wire strippers. The forged design delivers a professional level tool you expect from Klein. Easily twists three wires and cleanly strips both solid and stranded wire.

    Klein® Tools Helps Keep Essential Items Handy with New Datacom Installation Kits

    May 10, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the Twisted Pair and Coax Cable Installation Kits, the new go-to tool kits for professionals working on datacom installations. Twisted Pair Installation Kit (Cat. No. VDV026-212) Includes the tools needed to strip, crimp and punch down to connect modular cables, plus a zippered pouc...

    Klein® Tools Introduces Easy to Use, Easy to Carry Pocket Knives

    May 18, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the Bearing-Assisted and Spring-Assisted Open Pocket Knives, which both conveniently deploy with one hand. Designed for everyday use, Klein’s new Pocket Knives are not only easy to open but also easy to carry with low-sitting pocket clips. Bearing-Assisted Open Pocket Knife (Cat. N...

    Klein® Tools Opens Nominations for the 2018 Electrician of the Year

    Klein’s Big Game Blitz offers grand prize winner $1,500 of Klein Tools products and a chance to experience the 2019 Big Game without powering on the TV June 4, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, is accepting nominations for its annual Electrician of the Year award starting June 1, 2018. The award recognizes U.S.-based electricians who e...

    Klein® Tools “State of the Industry”: Problem Solving, Working with Your Hands and Job Security Are Top Reasons Millennials Enjoy Working in the Skilled Trades

    Millennials believe employers need to continue to attract younger workers by showing how skilled trade jobs make a difference in people’s everyday lives May 21, 2018 (Lincolnshire, Ill.) – Klein Tools today announced new results from its annual “State of the Industry” survey, with input from more than 800 union and non-union electricians. Survey results highlight when and why millenn...

    Klein® Tools’ New Clamping Worklight Provides Hands-Free Illumination

    May 8, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the Clamping Worklight for all day, hands-free illumination. Features include a 2-inch clamp, a 360-degree rotating LED head and pivoting feet to brighten any jobsite. This work light can be clamped where needed, stand on its own or handled easily, offering unmatched versatility. Clampi...

    Klein® Tools’ New Hybrid Pliers Reduce the Number of Tools Needed on the Job

    May 1, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the Hybrid Pliers with Crimper, an all-in-one solution for any jobsite. Its full length, induction-hardened cutting knives along with a high-leverage design provide greater cutting power for increased efficiency on the job. No task is impossible for the Hybrid Pliers, which enable profes...

    Klein® Tools’ New Multi-Tool Enables Seven Different Functions

    June 6, 2018 (Lincolnshire, Ill.) – Klein Tools (www.kleintools.com), for professionals since 1857, introduces the Electrician’s Hybrid Plier Multi-Tool, which features seven of the most used functions in one compact tool. When equipped with this every day carry tool, professionals will save time switching between tools, increasing efficiency on the job. Electrician's Hybrid Plier Multi-Tool ...

    Knockout Punch Set 3/4''

    Cat. No. 53727SEN
    Punch clean and accurate holes in electrical panels using Klein Tools' 3/4-inch Knockout Punch 3-Piece Set. The punch cuts up to 10-gauge mild steel. It can also cut through aluminum, fiberglass, and plastic.

    LAN Scout Jr. Continuity Tester

    Cat. No. VDV526-052
    Use Klein Tools LAN Scout Jr. tester to test continuity on twisted pair data wiring connections. This continuity tester has an integrated tone generator that supports multiple tones and control of the pins carrying the tone. It also has a self-storing remote that makes this tool easy to store and locate.

    Leather Back Pocket Tool Pouch

    Cat. No. 5481
    As the name implies, the Leather Back Pocket Tool Pouch fits into your back pocket for quick access to your tools. The leather construction is stitched and riveted to ensure a good long life. Six pockets give you plenty of places to hold your tools including a scissors pocket on the back flap. Fits onto your belt in a snap.

    Leather-Bottom Bucket

    Cat. No. 5104
    The Klein leather-bottom bucket is made of heavy-duty canvas to withstand harsh job sites. A strong reinforced web strap extends down the side for extra weight capacity. Load rated for 100 lbs (45.4 kg).

    Leather-Bottom Bucket Swivel Snap

    Cat. No. 5104S
    Load rated 100-pounds (45.4 kg). Web handle extends down the sides of the bucket for added strength. Made of heavy-duty No. 4 canvas. High-density polyethylene top ring for strength and chemical resistance. Leather reinforced bottom.

    LED Clip-On Flashlight

    Cat. No. X11
    Dual super bright, powerful 5 mm Nichia white LED light with 10,000 hours of lamp life. 6-lumen tested light-output generates a strong beam. 100 hours of battery life so you won't be left in the dark. Light turns on when swivel head is flipped up. Head pivots to a full 180° for light where you need it.

    Light Metal Snip

    Cat. No. 147
    Powerful and compact. Unique design will cut 24 gauge steel. Great for light production work.

    Light Metal Snips, Curved Blades

    Cat. No. 147C
    Powerful and compact. Unique design will cut 24 gauge steel. Great for cutting curved lines in light metal production work.

    Lighted Torpedo Billet Level, Rare Earth Magnet

    Cat. No. 935RBLT
    The high precision and accuracy of Klein's Lighted Billet Aluminum Torpedo level saves time and rework.Three large vials identify Level, 45 and 90 degrees. Ultra powerful rare-earth magnets with locking track secures the level to any metal surface. The bright LED high-definition of each are easy to read in any lighting condition. The level surface is precision ground and machined flat for increased accuracy. Durable aluminum ensures a long productive life while the high-visibility orange makes this level easy to find on conduit or the jobsite.

    Lighted Torpedo Level

    Cat. No. 9330RE
    A must-have tool for the busy electrician. Level lights up for maximum visibility in dark spaces. Powerful Rare Earth magnets allow for hands-free work. The 9'' (229 mm) size fits easily into your back pocket. AAA batteries are easily replaced.

    Lightweight Threadclip, Plastic Handle, 4-5/8''

    Cat. No. G704HC
    Stainless Steel blades, extra sharp points. Plastic molded body. 4-5/8 inches (117.5 mm) overall length; 1-1/2 inches (38.1 mm) cut length.

    Limited Edition 160th Anniversary Side Cutters

    Cat. No. J2000-9NECLX
    Be the envy of your friends and coworkers with these limited edition High-Leverage Side-Cutters. Created to honor Klein's 160th Anniversary, they are engraved with the American flag, Klein's 160th Anniversary logo and feature unique red, white and blue Journeyman™ handles. 2000 Series™ heavy-duty cutting knives cut ACSR, screws, nails, most hardened wire and are induction hardened for long life. The high-leverage design provides 46% greater cutting and gripping power than other plier designs. Exclusive handle tempering absorbs the “snap” when cutting wire. Available in the USA only.

    Lineman Backpack Orange

    Cat. No. 5185ORA
    The Klein Tools Lineman Backpack makes it easy to transport all of your gear to and from the jobsite. The backpack-style tool bag leaves hands free to climb ladders or carry extra gear. It also has a padded back area for comfort and to protect from sharp tools and climbing gear.

    Lineman’s Pliers, Double-Dipped Handles

    Cat. No. HD2000-9NE
    These Lineman's Pliers feature oversized handles that are double-dipped for added comfort. 2000 series knives cut ACSR, screws, nails and most hardened wire. The high-leverage design provides 46% greater cutting and gripping power. The plier head is precision-hardened for toughness and durability.

    Luminescent Shroud for X35 Flashlight

    Cat. No. 1101
    Designed for use with X35 Klein Flashlight. New generation photo-luminescent material in the plastic absorbs the energy from any light source - fluorescent lights, the sun, or even the flashlight's own beam. Lens ring emits a bright glow in the dark. No more fumbling in the dark for your flashlight.

    Magnetic Nut Driver Set 3'' Shaft, 7 Pc

    Cat. No. 631M
    The Klein Tools 7-Piece Magnetic Nut Driver Set features the most popular nut driver sizes and is perfect for a wide variety of applications. These nut drivers have magnetic tips and full hollow shafts that slide easily over long bolts or studs. Klein's patented Tip-Ident helps quickly identify the nut driver and size in a tool bag or pouch.

    Magnetic Torpedo Level

    Cat. No. 930-9
    Strong, extruded aluminum frame features a convenient built-in hang hole. Convenient 9'' (229 mm) length for use in tight spaces. Magnetized strip on bottom. Top-read level window simplifies viewing in tight areas. Handy V-grooved edge for pipe and conduit work.

    Magnetic Torpedo Level with Tether Ring

    Cat. No. 9319RETT
    Quick, easy, and accurate measurements can mean the difference between a job well done and one that misses the mark. Featuring powerful Rare Earth magnets and easy-to-see vials for precise measurements. Klein's Torpedo Level helps you measure up to the task.

    Mason's Club Hammer Wooden Handle

    Cat. No. 5HCMH1.35
    Great all-round club hammer for general striking applications. Forged from tough high-tensile carbon manganese steel, with hardened and tempered face and claw. Fitted with tough Australian spotted gum hardwood handle, oiled for long life and user comfort. Ideal for work in confined spaces. Handle is fitted to head with a glued wooden and steel wedge assembly.

    Multi-Cable Cutter Klein-Kurve®

    Cat. No. 63020
    The Klein Tools Klein-Kurve Multi-Cable Cutter has a wide range of blades designed to cut multiple types of cable. The anvil cutter cuts 12 AWG copper wire and stainless steel up to 0.032'' in diameter. The copper curved cutter cuts 8 AWG solid and 6 AWG stranded copper wire, conductors, and coaxial cable. This tool also has a cutter for mild steel.

    Normalized Ball Peen Hammer, Wooden Handle, 24 oz.

    Cat. No. 7HBPNH0675
    Klein Tools Normalized Ball Pein Hammers are excellent for use in metal work. They are particularly good for striking punches and chisels where risk of chiping and damage to struck objects needs to be minimized. The head is forged from high-tensile steel then normalized to give a softer face that is less likely to chip.

    Normalized Ball Peen Hammer, Wooden Handle, 32 oz.

    Cat. No. 7HBPNH0900
    Klein Tools Normalized Ball Pein Hammers are excellent for use in metal work. They are particularly good for striking punches and chisels where risk of chiping and damage to struck objects needs to be minimized. The head is forged from high-tensile steel then normalized to give a softer face that is less likely to chip.

    Normalized Ball Peen Hammer, Wooden Handle, 40 oz.

    Cat. No. 7HBPNH1135
    Klein Tools Normalized Ball Pein Hammers are excellent for use in metal work. They are particularly good for striking punches and chisels where risk of chiping and damage to struck objects needs to be minimized. The head is forged from high-tensile steel then normalized to give a softer face that is less likely to chip.

    Normalized Ball Peen Hammer, Wooden Handle, 48 oz.

    Cat. No. 7HBPNH1360
    Klein Tools Normalized Ball Pein Hammers are excellent for use in metal work. They are particularly good for striking punches and chisels where risk of chiping and damage to struck objects needs to be minimized. The head is forged from high-tensile steel then normalized to give a softer face that is less likely to chip.

    Normalized Claw Hammer - Wooden Handle - 20 oz.

    Cat. No. 7HCLNH0575
    Klein Tools Normalized Claw Hammers are great for general woodworking applications, especially where risk of chipping and damage to struck objects need to be minimized. The head is forged from tough high-tensile carbon manganese steel. The face is normalized to be softer and less likely to chip.

    Normalized Claw Hammer - Wooden Handle - 24 oz.

    Cat. No. 7HCLNH0675
    Klein Tools Normalized Claw Hammers are great for general woodworking applications, especially where risk of chipping and damage to struck objects need to be minimized. The head is forged from tough high-tensile carbon manganese steel. The face is normalized to be softer and less likely to chip.

    Normalized Sledge Hammer, Fiberglass Handle

    Cat. No. 7HSNFRH04
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It features a thick-cored fiberglass handle for extra strength with a non-slip oil resistant rubberized coating. The comfortable, thick rubber grip gives better protection from shock and vibration.

    Normalized Sledge Hammer, Fiberglass Handle

    Cat. No. 7HSNFRH07
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It features a thick-cored fiberglass handle for extra strength with a non-slip oil resistant rubberized coating. The comfortable, thick rubber grip gives better protection from shock and vibration.

    Normalized Sledge Hammer, Fiberglass Handle

    Cat. No. 7HSNFRH10
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It features a thick-cored fiberglass handle for extra strength with a non-slip oil resistant rubberized coating. The comfortable, thick rubber grip gives better protection from shock and vibration.

    Normalized Sledge Hammer, Fiberglass Handle

    Cat. No. 7HSNFRH14
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It features a thick-cored fiberglass handle for extra strength with a non-slip oil resistant rubberized coating. The comfortable, thick rubber grip gives better protection from shock and vibration.

    Normalized Sledge Hammer, Wooden Handle, 10 lbs.

    Cat. No. 7HSNH10
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It is fitted with a tough Australian spotted gum hardwood handle, which is oiled for long life and user comfort.

    Normalized Sledge Hammer, Wooden Handle, 14 lbs.

    Cat. No. 7HSNH14
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It is fitted with a tough Australian spotted gum hardwood handle, which is oiled for long life and user comfort.

    Normalized Sledge Hammer, Wooden Handle, 4 lbs.

    Cat. No. 7HSNH04
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It is fitted with a tough Australian spotted gum hardwood handle, which is oiled for long life and user comfort.

    Normalized Sledge Hammer, Wooden Handle, 7 lbs.

    Cat. No. 7HSNH07
    This soft-faced Normalized Sledge Hammer from Klein Tools is excellent for heavy applications where risk of chipping needs to be minimized. The head is forged from high-tensile steel, then normalized to give a softer face that is less likely to chip. It is fitted with a tough Australian spotted gum hardwood handle, which is oiled for long life and user comfort.

    Nut Driver Set 3'' Shafts, 7 Pc

    Cat. No. 631
    This 7-Piece Nut Driver Set from Klein Tools features a wide selection of the most frequently used nut drivers with 3'' (76 mm) shafts. Each nut driver features Tip-Ident to quickly identify the nut driver and size. Cushion-Grip handles provide for greater torque and comfort, no slippage.

    Nut Driver Set 6'' Shafts, Magnetic 2 Pc

    Cat. No. 646M
    This 2-Piece Magnetic Nut Driver set from Klein Tools features two of the most frequently used nut driver sizes. They feature full 6'' (152 mm) hollow shafts that fit easily over extra-long bolts and studs. The handle end is also color coded to easily identify the nut drivers in a tool bag or pouch.

    Overstrike Protector (Large) for sledgehammer

    Cat. No. 5HOSPL
    Klein's Overstrike Protector for Sledgehammers absorbs shock and vibration when overstrike occurs. It tightly fits on sledgehammer handle to reduce overstrike damage. The protector is made from non-slip, high density rubber compound.

    Overstrike Protector for sledgehammer

    Cat. No. 5HOSPS
    Klein's Overstrike Protector for Sledgehammers absorbs shock and vibration when overstrike occurs. It tightly fits on sledgehammer handle to reduce overstrike damage. The protector is made from non-slip, high density rubber compound.

    Photo Luminescent Shroud for Flashlights

    Cat. No. 1100
    Designed for use with X19 and X21 Klein Flashlights. New generation photo-luminescent material in the plastic absorbs the energy from any light source - fluorescent lights, the sun, or even the flashlight's own beam. Lens ring emits a bright glow in the dark. No more fumbling in the dark for your flashlight.

    Pin Punch Long 1/4''

    Cat. No. 4PPL06.5
    Used for driving out and removing pins and keys. Tough and resilient shaft made from quality tool steel. Heat treated for durability and strength. Soft head for safety; will mushroom, not chip. Knurled handle for gripping easily.

    Pin Punch Long 15/64''

    Cat. No. 4PPL06
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punch Long 25/64''

    Cat. No. 4PPL10
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punch Long 3/16''

    Cat. No. 4PPL05
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punch Long 3/32''

    Cat. No. 4PPL02.5
    Used for driving out and removing pins and keys. Tough and resilient shaft made from quality tool steel. Heat treated for durability and strength. Soft head for safety; will mushroom, not chip. Knurled handle for gripping easily.

    Pin Punch Long 5/16''

    Cat. No. 4PPL08
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punch Long 5/32''

    Cat. No. 4PPL04
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punch Long 7/64''

    Cat. No. 4PPL03
    This long-style Pin Punch from Klein Tools is great for driving out and removing pins and keys. It features a soft head that will mushroom instead of chip for added safety. The knurled handle provides better grip.

    Pin Punches Extra Long 3 Piece Set

    Cat. No. 4PPXLSET3
    This Klein Tools 3-Piece Pin Punch set is great for driving out and removing pins and keys. Each punch features and extra-long 5-5/16'' (135 mm) pin length. These pin punches also have a soft head that will mushroom instead of chip for added safety.

    Pin Punches Extra Long 5 Piece

    Cat. No. 4PPXLSET5
    This Klein Tools 5-Piece Pin Punch set is great for driving out and removing pins and keys. Each punch features and extra-long 5-5/16'' (135 mm) pin length. These pin punches also have a soft head that will mushroom instead of chip for added safety.

    Pin Punches Long 8 Piece Set

    Cat. No. 4PPLSET8
    Proudly manufactured in Australia, this set of pin punches from Klein Tools is built for strength and reliability. Used for driving out and removing pins and keys. Also features a lifetime warranty.

    Podger Pin - 1'' (25 mm)

    Cat. No. 5POP25
    Used for aligning holes and expanding holes in mild steel, this podger pin is forged from touch high-tensile carbon manganese steel for maximum performance. Forged, not turned, long tapered point helps ease alignment. For added safety, the forged head prevents pin from being driven right through hole and falling. Hex shaft allows spanner to be used to assist in removal.

    Podger Pin - 1-3/16'' (30 mm)

    Cat. No. 5POP30
    Used for aligning holes and expanding holes in mild steel, this podger pin is forged from touch high-tensile carbon manganese steel for maximum performance. Forged, not turned, long tapered point helps ease alignment. For added safety, the forged head prevents pin from being driven right through hole and falling. Hex shaft allows spanner to be used to assist in removal.

    Polypropylene Hand-Line with Snap Hook

    Cat. No. 1803-60
    Made of 5/16-Inch (8 mm) three-strand polypropylene rope spliced to eye of snap hook. Line 75-feet (22.86 m) long. Forged steel snap hook with eye at 90 degree to opening. Maximum Safe Load, 250-pounds (113 kg).

    Pry Bar

    Cat. No. 5PRBP45016
    Forged from tough high-tensile carbon manganese steel, the Klein Tools pry bar is used for prying, separating flanges and aligning holes. The thin, finely ground curved chisel end allows for easy entry between surfaces. The profile is hexagonal for greater control. The long tapered point is forged for maximum strength.

    Punchdown Multi-Tool with 110/66 Blade

    Cat. No. VDV427-806
    The Punchdown Multi-Tool with 110/66 blade terminates and cuts wire in one convenient step. It is spring-loaded for fast low effort seating and terminating. The included precision ground combination 66 and 110 blade and the variety of optional WorkEnds™ driver bits provide flexibility. The cut side is color coded yellow for identification.

    Punchdown Multi-Tool with 110/66 Blade & WorkEnds

    Cat. No. VDV427-807
    Terminate and cut wire in one step with this Punchdown Multi-Tool from Klein Tools featuring a precision ground 66/110 combination blade. It also has a selectable Hi/Low impact force setting designed to industry standards. An integrated hook and spudger makes it fast and easy to manipulate wire and small components.

    Punchdown Screwdriver Multi-Tool

    Cat. No. VDV001-081
    Now you can punchdown wall jacks and patch panels with the convenience of a multi-bit screw driver/nut driver. With its machined tool steel for greater strength, this product comes with multi-bits to make your job easier. Shaft holds 4 universal tips and converts to 2 nut driver sizes and 1 hex driver. Great for use on 110 terminal/patch panel and 66 patch panels.

    Quad Input Temperature Logger

    Cat. No. DTL304
    Four-input dual differential digital temperature tester offers logging, monitoring and uploading capabilities to help analyze system performance trends with the included software. The IP67: Waterproof, dust resistant rating means you can take it into harsh environments. Some other functions include Differential T1-T2 & T3-T4 and Data Logging. Great for HVAC applications. Includes thermocouples, magnetic hanger strap, USB power adapter and batteries.

    Radial Cartridge Stripper

    Cat. No. VDV110-802-SEN
    Designed for high-volume, cable preparation environments. ''Active'' stripping cartridge-bay and second ''storage'' cartridge-bay. One-piece construction ensures precise stripping and never requires adjustment. Large finger loop promotes rotation during use. Cartridges snap in from both sides for left or right-handed operation.

    Radial Stripper Cartridge

    Cat. No. VDV113-804-SEN
    Designed for high-volume, cable preparation environments. ''Active'' stripping cartridge-bay and second ''storage'' cartridge-bay. One-piece construction ensures precise stripping and never requires adjustment. Large finger loop promotes rotation during use. Cartridges snap in from both sides for left or right-handed operation.

    Radial Stripper UTP/STP

    Cat. No. VDV120-006
    One-step outer jacket stripping of category 3, 5, 5e, 6, and 6a cables. Durable high-carbon steel cutting blades are ground and honed for long life. Removes the outer jacket of twisted-pair cable without damaging the conductors. Strip and slit lengths may be varied to accommodate different connector requirements. Recessed cutting surface slits long runs of twisted-pair cable.

    Radial Stripper UTP/STP

    Cat. No. VDV120-006-SEN
    The Klein Tools Twisted Pair (UTP/STP) Radial Stripper is designed remove the outer jacket of twisted pair cable without damaging the conductors. This tool features multiple nest cavities which lets you remove a wide variety of jacket materials. The one-piece construction ensures alignment for precise stripping.

    Rare Earth Magnetic Torpedo Level

    Cat. No. 931-9RE
    Quick, easy, and accurate measurements can mean the difference between a job well done and one that misses the mark. Featuringpowerful Rare Earth magnets and easy-to-see vials for precise measurements. Klein's Torpedo Level helps you measure up to the task.

    Rebar Work Pliers with Tether Ring

    Cat. No. D213-9STT
    Falling objects is a common safety issue in the workplace. Falling tools are dangerous. Even a small object falling from a height can cause serious injury or damage. These ironworker's pliers feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The high leverage design provides greater cutting and gripping power. Protect yourself, your equipment and others on the job site with Klein's high leverage ironworker's pliers with tether ring.

    Recoil LED Grip-It 90° Flashlight

    Cat. No. X21
    Bright, powerful 1 watt Luxeon Lambertion LED utilizes Recoil LED Technology and provides 10,000 hours of lamp life. 32-lumen tested light-output generates a bright LED beam. Recoil LED Technology focuses 100% of the light forward to produce a white collimated beam that's as bright as an incandescent light. One-hand safety on/off switch operation. Rugged ABS body with durable polycarbonate lens, O-ring sealed shroud.

    Recoil LED Grip-It Flashlight

    Cat. No. X19
    Bright, powerful 1 watt Luxeon Lambertion LED utilizes Recoil LED Technology and provides 10,000 hours of lamp life. 32-lumen tested light-output generates a bright LED beam. Recoil LED Technology focuses 100% of the light forward to produce a white collimated beam that's as bright as an incandescent light. 32 hours of battery life so you won't be left in the dark. One-hand safety on/off switch operation.

    Recoil LED Heavy Duty Flashlight

    Cat. No. X35
    Bright, powerful 1-watt Luxeon Lambertion LED utilizes Recoil LED Technology and provides 10,000 hours of lamp life. 32-lumen tested light-output generates a bright LED beam. Recoil LED Technology focuses 100% of the light forward to produce a white collimated beam that's as bright as an incandescent light. 50 hours of battery life so you won't be left in the dark. Twist on/off activation prevents accidental switch activation.

    Refinery Bucket with Pockets

    Cat. No. 5104R
    Improve workplace safety with this heavy duty, top closing lift bucket. Load rated at 150 lbs (68 kg), this lift bucket safely store tools used at refineries. The padded shoulder strap was designed specifically for refinery workers.

    Remote Kit for Coax Explorer®

    Cat. No. VDV512-110
    This Remote Kit features four remotes to test F-connector coaxial cables and map their locations. For use with the Coax Explorer® 2 tester (not included). The test remotes plus an F-adapter conveniently snap into the removable remote holder for storage. A handy kit to have on hand if you need to test andmap additional locations.

    Replacement Handles for 8'' to 9'' Pliers

    Cat. No. 89
    Plastic for slip-resistant grip and comfort.

    Round Crowbar 71'' x 1-1/16''

    Cat. No. 5CBR180025
    This round crowbar from Klein Tools is used for digging holes and breaking clay, rock and concrete. It has been forged from tough high-tensile carbon manganese steel. This crowbar has ground and sharpened diamond point end for easier digging and breaking concrete. It also features a long tapered blade for easier digging.

    Round Crowbar 71'' x 1-3/16''

    Cat. No. 5CBR180030
    This round crowbar from Klein Tools is used for digging holes and breaking clay, rock and concrete. It has been forged from tough high-tensile carbon manganese steel. This crowbar has ground and sharpened diamond point end for easier digging and breaking concrete. It also features a long tapered blade for easier digging.

    Round Crowbar 71'' x 7/8''

    Cat. No. 5CBR180022
    This round crowbar from Klein Tools is used for digging holes and breaking clay, rock and concrete. It has been forged from tough high-tensile carbon manganese steel. This crowbar has ground and sharpened diamond point end for easier digging and breaking concrete. It also features a long tapered blade for easier digging.

    Rubber Flashing Scissor w/Curved Blade, 5-1/2''

    Cat. No. 546C
    Large bows and sleek narrow curved blades with extra sharp points. Used extensively in the automotive industry for trimming flash off rubber. Black cushion grip handles.

    Safety Scissor, 6''

    Cat. No. 446HC
    Often called Pocket or Safety Scissors, these scissors are excellent for thread, yarn processing, weaving and carpet mills. Protects against injury and damage to material.

    Safety Scissors w/Large Rings, 6''

    Cat. No. G46HC
    Often called Pocket or Safety Scissors these scissors are excellent for thread, yarn processing, weaving, knitting mills and carpet mills. Protects against injury and damage to material. Heavy Duty with extra large rings.

    Safety Scissors, 4''

    Cat. No. 444HC
    Often called Pocket or Safety Scissors, these scissors are excellent for thread, yarn processing, weaving and carpet mills. Protects against injury and damage to material.

    Safety Scissors, 5''

    Cat. No. H445
    Often called Pocket or Safety Scissors these scissors are excellent for thread, yarn processing, weaving and knitting mills. Protects against injury and damage to material. Can be used right- or left-handed.

    Self-Adjusting Wire Stripper/Cutter

    Cat. No. 11061
    Take the guesswork out of stripping solid, stranded, and Romex® wire with the Klein Tools Self-Adjusting Wire Stripper/Cutter. As the name suggests, this tool features a self-adjusting stripping head for quick, precise wire stripping. It's especially useful in panels and other places where multiple types and sizes of wire are present. Great for HVAC applications.

    Self-locking Block Without Rope and Hook

    Cat. No. 267
    Blocks without ropes and hooks. Made of light galvanized steel and aluminum alloy. Sheaves have bronze bushings.

    Serrated Electrician Scissors with Stripping Notches

    Cat. No. 100CS
    The 100CS is nickel plated with wire stripping notches for 19 and 23 gauge wire. Blades hardened to 59 to 61C Rockwell for extra cutting life with serrations for holding wire while it cuts.

    Sharp Point Scissor, 6''

    Cat. No. 406
    These sharp pointed scissors have a Rockwell of 56-58, making them ideal for embroidery, sewing, fabric, electronics, and many other industries. Sharp/Sharp Tips. Chrome over nickel plated for added protection. 6-1/8 inches (155.6 mm) overall length; 2-1/2 inches (63.5 mm) cut length.

    Ship Auger Bit 11/16'' Bit, 4'' Twist

    Cat. No. 53401
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point

    Cat. No. 53409
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 1''

    Cat. No. 53406
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 1-1/16''

    Cat. No. 53407
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 1-1/2''

    Cat. No. 53411
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 1-1/8''

    Cat. No. 53408
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 13/16''

    Cat. No. 53403
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 15/16''

    Cat. No. 53405
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 3/4''

    Cat. No. 53402
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Ship Auger Bit with Screw Point 7/8''

    Cat. No. 53404
    The deep, open-throat design of the Ship Auger bit clears chips for faster, cleaner cuts. The shank is 7/16'' hex to fit 1/2'' (13 mm) and larger three-jaw chucks. Used for heavy construction and repair work in mines, on docks and bridges as well as electrical work.

    Side Cutters with Wire Stripper/Crimper

    Cat. No. J2139NECRN
    These high leverage side cutting pliers feature a crimper and wire stripping holes. Dual-material Journeyman handles provide a better grip without sacrificing tool strength and durability. Hot-riveted joint ensures smooth action and no handle wobble.

    Sledge Hammer Wooden Handle 10 lbs.

    Cat. No. 5HSH10
    Klein's well balanced, versatile sledge hammer built tough for the mining, building and construction industries. Forged from high tensile carbon manganese steel, the faces are hardened and tempered for increased product life. The tough Australian spotted gum hardwood handle is oiled for long life and user comfort.

    Sledge Hammer Wooden Handle 14 lbs.

    Cat. No. 5HSH14
    Klein's well balanced, versatile sledge hammer built tough for the mining, building and construction industries. Forged from high tensile carbon manganese steel, the faces are hardened and tempered for increased product life. The tough Australian spotted gum hardwood handle is oiled for long life and user comfort.

    Sledge Hammer Wooden Handle 4 lbs.

    Cat. No. 5HSH04
    Klein's well balanced, versatile sledge hammer built tough for the mining, building and construction industries. Forged from high tensile carbon manganese steel, the faces are hardened and tempered for increased product life. The tough Australian spotted gum hardwood handle is oiled for long life and user comfort.

    Sledge Hammer Wooden Handle 7 lbs.

    Cat. No. 5HSH07
    Klein's well balanced, versatile sledge hammer built tough for the mining, building and construction industries. Forged from high tensile carbon manganese steel, the faces are hardened and tempered for increased product life. The tough Australian spotted gum hardwood handle is oiled for long life and user comfort.

    Sledge Hammer Wooden Handle 8 lbs.

    Cat. No. 5HSH08
    Klein's well balanced, versatile sledge hammer built tough for the mining, building and construction industries. Forged from high tensile carbon manganese steel, the faces are hardened and tempered for increased product life. The tough Australian spotted gum hardwood handle is oiled for long life and user comfort.

    Sledge Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 5HSFRH07
    Klein's well-balanced, versatile sledge hammer is great for the mining, building and construction industries. It is forged from tough high-tensile steel with hardened and tempered faces. For extra strength, the handle is made of thick-cored fiberglass and includes a non-slip, oil-resistant rubberized coating. Also, the head is pinned and epoxied to its handle to provide long life and prevent head from coming off.

    Sledge Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 5HSFRH10
    Klein's well-balanced, versatile sledge hammer is great for the mining, building and construction industries. It is forged from tough high-tensile steel with hardened and tempered faces. For extra strength, the handle is made of thick-cored fiberglass and includes a non-slip, oil-resistant rubberized coating. Also, the head is pinned and epoxied to its handle to provide long life and prevent head from coming off.

    Sledge Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 5HSFRH14
    Klein's well-balanced, versatile sledge hammer is great for the mining, building and construction industries. It is forged from tough high-tensile steel with hardened and tempered faces. For extra strength, the handle is made of thick-cored fiberglass and includes a non-slip, oil-resistant rubberized coating. Also, the head is pinned and epoxied to its handle to provide long life and prevent head from coming off.

    Sledge Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 5HSFRH28
    Klein's well-balanced, versatile sledge hammer is great for the mining, building and construction industries. It is forged from tough high-tensile steel with hardened and tempered faces. For extra strength, the handle is made of thick-cored fiberglass and includes a non-slip, oil-resistant rubberized coating. Also, the head is pinned and epoxied to its handle to provide long life and prevent head from coming off.

    Sledge Hammer, Fiberglass Rubber Grip Handle

    Cat. No. 5HDFRH04400
    Well-balanced, versatile sledge hammer for the mining, building and construction industries. Forged from tough high-tensile steel with hardened and tempered faces. A thick-cored fiberglass handle for extra strength with a non-slip, oil-resistant rubberized coating. Head is pinned and epoxied to handle to prevent head coming off. Thick handle with large sweep at base to prevent loss of grip.

    Slim Rebar Work Pliers with Tether Ring

    Cat. No. D201-7CSTT
    Falling objects is a common safety issue in the workplace. Falling tools are dangerous. Even a small object falling from a height can cause serious injury or damage.These slim ironworker's pliers feature a split ring for tethering pliers while working at height. All of the features of Klein pliers plus the added safety of a tether ring. The slim design twists and cuts soft annealed rebar tie wire. Protect yourself, your equipment and others on the job site with Klein's slim ironworker's pliers with tether ring.

    Spring Action Snip, 6-3/4''

    Cat. No. 744
    Serrated blade, cushion grip handles with locking latch. Cuts Kevlar® material. Highly durable scissors that also provide a comfortable grip.

    Star Dropper Hammer

    Cat. No. 5SDSH
    This Star Dropper Hammer from Klein Tools is designed for driving in star, also known as fencing, droppers. It can also be used to drive in marker pegs, stakes and concreting stakes. The slug and handles are welded together, not to the pipe, for greater strength.

    Star Dropper Remover

    Cat. No. 5SDR
    Remove Star Droppers, also called star pickets or fencing droppers, with ease using Klein Tools' Star Dropper Remover. It is also excellent at removing selected pipes and steel pegs. The gripper bites efficiently into the dropper for easy extraction.

    Starter Drift - Large Body

    Cat. No. 5SDL30016
    Klein Tools' Large Body Starter Drifts are designed for aligning holes in heavy construction. This starter drift is mean to be driven with a hammer, and it will not score when driven hard. The taper is forged, not turned, which provides greater tensile strength.

    Starter Drift - Large Body

    Cat. No. 5SDL45020
    Klein Tools' Large Body Starter Drifts are designed for aligning holes in heavy construction. This starter drift is mean to be driven with a hammer, and it will not score when driven hard. The taper is forged, not turned, which provides greater tensile strength.

    Starter Drift - Large Body

    Cat. No. 5SDL45025
    Klein Tools' Large Body Starter Drifts are designed for aligning holes in heavy construction. This starter drift is mean to be driven with a hammer, and it will not score when driven hard. The taper is forged, not turned, which provides greater tensile strength.

    Starter Drift Large Body

    Cat. No. 5SDL45030
    Klein Tools' Large Body Starter Drifts are designed for aligning holes in heavy construction. This starter drift is mean to be driven with a hammer, and it will not score when driven hard. The taper is forged, not turned, which provides greater tensile strength.

    Starter Drifts 6 Piece Set

    Cat. No. 4SDSET6
    Use this Klein Tools Starter Drift Set to loosen pins before using a pin punch. This set features six different diameter starter drifts for a wide range of applications. Also use these starter drifts as an aid when aligning bolt or rivet holes before inserting a fastener.

    Steel Replacement Fish Tape 65 ft

    Cat. No. 56065
    Klein Tools' Steel Replacement Fish Tapes feature permanent laser-etched markings for more accurate measuring of conduit runs. Available in three sizes: 65' (19 m), 125' (38 m), and 240' (73 m).

    Straight SS Trimmer w/Large Ring, Ball Point, 9''

    Cat. No. G758LRBP
    Forged-not soldered-ball point for poultry venting. High leverage with large ergo handle to reduce strain! 9-1/4 inches (235.0 mm) overall length; 3 inch (76.2 mm) cut length.

    Straight Stainless Trimmer w/Ball Point, 8''

    Cat. No. G758BP
    Forged - not soldered - ball point for poultry venting. High leverage, regular size handle, 8-7/8 inches (225.4 mm) overall length; 3 inches (76.2 mm) cut length.

    Straight Stainless Trimmer w/Large Ring, 9''

    Cat. No. G758LR
    This shear is one of the most widely used stainless steel shears on the market. Excellent for cutting a wide variety of material including fabric, rubber, poultry, light metal, and light wire. Highly durable scissors that also provide a comfortable grip.

    Straight Trimmer Scissors, 7''

    Cat. No. 107-P
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, Chrome over nickel plated. 7-1/2 inches (190.5 mm) overall length; 3-1/2 inches (88.9 mm) cut length.

    Straight Trimmer, 7''

    Cat. No. 107HC
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated. 7-1/2 inches (190.5 mm) overall length; 3-1/2 inches (88.9 mm) cut length.

    Straight Trimmer, 8''

    Cat. No. G108
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated. 8-1/4 inches (209.6 mm) overall length; 4 inches (101.6 mm) cut length.

    Straight Trimmer, 9''

    Cat. No. 109-P
    Longer cut length steel blades cut more in one motion. Precision ground blades produce a sharp, clean, uniform cut. Chrome over nickel-plated blades resist corrosion and rust. Cuts heavy textiles, construction paper, cardboard, and plastics. Hot forged steel trimmer. Made in USA. Length of cut is 4-1/2 inches (114.3 mm). Overall length is 9-1/4 inches (235.0 mm). Weight is 0.43 pounds (0.20 kg).

    Straight Trimmer, 9''

    Cat. No. G109HC
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated. 9-1/4 inches (235.0 mm) overall length; 4-1/2 inches (114.3 mm) cut length.

    Straight Trimmer, Ambidex Handles, SS, 5-1/8''

    Cat. No. 7135-P
    Double sharp point blades designed to cut in hard-to-reach places. Precision ground high-quality Stainless Steel blades produce a sharp, clean, uniform cut. Locking nut and bolt design allows user to adjust blade tension maintaining optimum cutting performance. Versatile rings allow for right- or left-handed use. Cuts embroidery floss, thread, yarn, and is great for sewing and detailed crafting projects. Stainless Steel scissors. Length of cut is 2 inches (50.4 mm). Overall length is 5-1/8 inches (130.2 mm). Weight is 0.09 pounds (0.04 kg).

    Straight Trimmer, Blunt Tips, 8''

    Cat. No. G108B
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated with blunt blade tips. 8-1/4 inches (209.6 mm) overall length; 4 inches (101.6 mm) cut length.

    Straight Trimmer, Curved Blades, 8''

    Cat. No. G108C
    Poultry processing scissors or cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated. 8-1/4 inches (209.6 mm) overall length; 4 inches (101.6 mm) cut length.

    Straight Trimmer, Extra Blunt Tips, 7-3/4''

    Cat. No. 108XB
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated with extra blunt blade tips. 7-3/4 inch (196.9 mm) overall length; 3-1/4inches (82.5 mm) cut length.

    Straight Trimmer, Fully Rounded Tips, 6''

    Cat. No. 106F
    Industrial quality trimmers hold a keen edge even when switching from fine fabrics to heavier material. Cut fabric, canvas, felt, lining, silk, muslin, cord and almost any other material in the textile industry. Hot drop forged, chrome over nickel plated with fully rounded blade tips. 6-1/8 inches (155.6 mm) overall length; 2-5/8 inches (66.7 mm) cut length.

    Straight Trimmer, Plastic Ambidex Handle, 5-1/8''

    Cat. No. G7135
    Double sharp points for hard-to-reach areas. Ideal for detail work. Patent #409465. 5-1/8 inches (130.2 mm) overall length; 2 inches (50.8 mm) cut length.

    Straight Wall Bucket Swivel Snap

    Cat. No. 5109S
    75-pound (34 kg) Max Load Rating. Web handle extends down the sides of the bucket for added strength. Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas. High-density polyethylene top ring for strength and chemical resistance. No. 6 canvas. The No. canvas refers to the canvas weight. No. 1 being the thickest and No. 8 being the thinnest.

    Strain Relief Boot for RJ45 Data Plug

    Cat. No. VDV824-632
    Now you can protect your modular data plugs. The strain relief boot works on RJ45 modular plugs to protect the connector housing from wear and tear. It also minimizes cable bending to protect connection.

    Swivel Anchor Hook

    Cat. No. 259
    Klein's Heavy-Duty Swivel Anchor Hook prevents twisting and kinking of rope. Swivel clevis on this forged hook will engage with snap on Klein Block and Tackle Packages (Cat. Nos. 1802-30 and H1802-30). Rugged, durable design for the toughest job sites.

    Tailor Point Scissor, 5''

    Cat. No. G435
    These extra sharp heavy duty scissors have a Rockwell of 56-58, making them ideal for embroidery, sewing, fabric, electronics, and many other industries. Sharp/Sharp Tips. Chrome over nickel plated for added protection. 5-1/2 inches (139.7 mm) overall length; 2 inches (50. mm) cut length.

    Tape Measure 7.5 m Magnetic

    Cat. No. 93275
    Klein Tool's Magnetic Tape Measures have the innovative high-quality features to make the job easier and more efficient. Large end hooks with Rare Earth magnets are 5x stronger. Horizontal and vertical standout makes for easy one-person measurements.

    Tape Measure- 16' Magnetic

    Cat. No. 93116
    Klein Tool's Magnetic Tape Measures have the innovative high-quality features to make the job easier and more efficient. Large end hooks with Rare Earth magnets are 5x stronger. Horizontal and vertical standout makes for easy one-person measurements.

    Tape Measure- 25' Magnetic Double Hook

    Cat. No. 93225
    Klein Tool's Magnetic Tape Measures have the innovative high-quality features to make the job easier and more efficient. Large end hooks with Rare Earth magnets are 5x stronger. Horizontal and vertical standout makes for easy one-person measurements.

    Tape Measure- 25' Magnetic Single Hook

    Cat. No. 93125
    Klein Tool's Magnetic Tape Measures have the innovative high-quality features to make the job easier and more efficient. Large end hooks with Rare Earth magnets are 5x stronger. Horizontal and vertical standout makes for easy one-person measurements.

    Tape Measure- 25' Single Hook

    Cat. No. 93025
    Oversized, bold blade numbers on first 11'' (279 mm) for easy reading. 16'' (406 mm) stud markings and 19.2'' (488 mm) truss markings. Non-magnetic single hook. Rubberized lock button for comfort. Impact absorbing case.

    Tape Measure- 30' Magnetic

    Cat. No. 93430
    Klein Tool's Magnetic Tape Measures have the innovative high-quality features to make the job easier and more efficient. Large end hooks with Rare Earth magnets are 5x stronger. Horizontal and vertical standout makes for easy one-person measurements.

    Threadclip, 4-1/2''

    Cat. No. GHTC5
    Spring Action opens automatically. Chrome over nickel plated. 4-1/2 inches (114.3 mm) overall length; 1-3/8 inches (34.9 mm) cut length.

    Threadclip, 4-1/2''

    Cat. No. HTC5
    Spring Action opens automatically. Chrome over nickel plated. 4-1/2 inches (114.3 mm) overall length; 1-3/8 inches (34.9 mm) cut length.

    Threadclip, Blunt Tips, 4-1/2''

    Cat. No. GHTC5B
    Spring Action opens automatically. Chrome over nickel plated. Blunt tips. 4-1/2 inches (114.3 mm) overall length; 1-3/8 inches (34.9 mm) cut length.

    TONEcube & PROBEplus Tone and Probe Tracing Kit

    Cat. No. VDV500-808
    Trace wire paths and identify coax and twisted cables in common wiring systems with Klein Tools TONEcube & PROBEplus cable tracing probe. The kit includes a professional series tone generator and tone tracer. The amplifier overload LED improves accuracy, warning against misreads. Five discrete tracing tone sounds can be selected by tone switch.

    Tool Stool

    Cat. No. 98820
    From the Klein Tools Branded Collection, the Klein Tools Stool reflects the quality, comfort and durability Klein is known for. The Klein Tools Stool is a practical addition to any jobsite and makes a great gift for any tool fan. Sit in style with the Klein Tools Stool.

    Top Closing Bolt Bag

    Cat. No. 5416TC
    This Klein Tools Top Closing Bolt bag has a drawstring top to keep small tools and parts from falling out.It’s made of heavy duty canvas. Plus, it has loops on each side to hold standard bull-pins.

    Torpedo Billet Level, Rare Earth Magnet

    Cat. No. 935RB
    This high precision and accuracy of Klein's Billet Aluminum Torpedo level saves time and rework. Four large, easy-to-read vials identify Level, 30, 45 and 90 degrees. The level surface is precision ground and machined flat for increased accuracy. Durable aluminum ensures a long productive life while the high-visability orange makes this level easy to find on conduit or the jobsite.

    Torque Wrench Bucket

    Cat. No. 5104CLR36
    Load rated 150 lbs. (68 kg). 36'' (914 mm) height to lift torque wrenches. Top of bucket zips closed. Body constructed of heavy-duty No. 1 canvas. Web strap extends down the side of the bucket.

    TraceAll Tone & Probe

    Cat. No. VDV526-054
    Trace wire paths and identify cables in common wiring systems with Klein Tools Trace All Tone and Probe. This tone generator supports two distinct tones and has an adjustable volume level. The self-storing remote saves time and effort on the job.

    Tradesman Pro™ 10'' Tote

    Cat. No. 55416-10
    40 pockets for maximum tool storage. Orange interior for easy tool visibility. Removable zipper bag designed to fit compartment underneath. Tough, durable feet protect from the elements. 1680d ballistic weave for durability.

    Tradesman Pro™ 15 Pocket Tool Pouch

    Cat. No. 5243
    Organize your tools to match your jobsite needs. Mix and match this hard working 15 pocket Klein Tools pouch with a padded tool belt. This tool pouch includes an optional shoulder strap for convenient hands free carrying. Multiple pockets in a variety of sizes hold a mix of tools and consumables to handle an array of jobsite demands.

    Tradesman Pro™ 8-Inch Tote

    Cat. No. 55415-8
    20 pockets for greater tool storage. Orange interior for easy tool visibility. Removable zipper bag designed to fit compartment underneath. Tough, durable feet protect from the elements. 1680d ballistic weave for durability.

    Tradesman Pro™ Attachable Hacksaw Holder

    Cat. No. 55454DHB
    Klein Tools introduces a holder designed specifically to hold a hacksaw. It features a quick link for attaching to tool bags for easy transport. It also has a protective plastic lined interior that keeps the hacksaw blade from damaging the holder.

    Tradesman Pro™ Backpack

    Cat. No. 55421-BP
    39 pockets for tons of tool storage. Orange interior for easy tool visibility. Wide opening fits power drills, meters, flashlights, etc. Tough, durable molded bottom protects from the elements. Large front pocket easily fits fish tapes.

    Tradesman Pro™ Extreme Electricians Bag

    Cat. No. 55417-18
    78 pockets for extreme tool storage. Orange interior for easy tool visibility. Wide center with removable pockets for easy access to tools. Tough, durable molded bottom protects from the elements. 1680d ballistic weave for durability.

    Tradesman Pro™ Hacksaw Electricians Bag

    Cat. No. 55453HSB
    The Klein Tools Hacksaw Electrician's Bag has a unique pocket designed specificially for storing a hacksaw. This pocket has a protective plastic lining, so the hacksaw blade won't damage the bag, and it's top loading for easy access. 48 pockets inside and out provide plenty of storage options for all your tools.

    Tradesman Pro™ Knife Holder with Clip

    Cat. No. 5248
    Keep your favorite knife handy in this Klein Tools knife holder with metal clip for your belt or pocket. Includes magnetic flap closure for convenience. Tradesman Pro products are durable, versatile, functional and designed with the tradesperson in mind. They feature 1680d ballistic weave material with orange detailed trim and interiors for easy tool visibility. This knife holder fits closed knives up to 4-1/2''.

    Tradesman Pro™ Maintenance Tool Pouch

    Cat. No. 5240
    Organize your tools to match your jobsite needs. Mix and match this Klein Tools small pouch with a padded tool belt. This pouch is great for quick maintenance jobs requiring just the essential tools.

    Tradesman Pro™ Padded Tool Belt, Large

    Cat. No. 5246
    Mix and match Klein Tradesman Pro pouches as desired to carry only the tools you need. Padded belt with mesh interior is breathable and comfortable. Metal connection points allow for additional suspender support. Belt fits 35'' - 39'' (889 - 991 mm) waists.

    Tradesman Pro™ Padded Tool Belt, Medium

    Cat. No. 5245
    Mix and match Klein Tradesman Pro pouches as desired to carry only the tools you need. Padded belt with mesh interior is breathable and comfortable. Metal connection points allow for additional suspender support. Belt fits 31'' - 34'' (787 - 864 mm) waists.

    Tradesman Pro™ Padded Tool Belt, XL

    Cat. No. 5247
    Mix and match Klein Tradesman Pro pouches as desired to carry only the tools you need. Padded belt with mesh interior is breathable and comfortable. Metal connection points allow for additional suspender support. Belt fits 40'' - 44'' (1016 -1118mm) waists.

    Tradesman Pro™ Rolling Tool Bag

    Cat. No. 55452RTB
    Cart your tools around the jobsite with ease in Klein Tools' Tradesman Pro Organizer Rolling Tool Bag. The rugged 6-inch wheels can easily handle rough terrain. This tough bag can store up to 100 lbs. (45.4 kg) of tools and materials inside, and another 100 lbs. (45.4 kg) stacked on top.

    Tradesman Pro™ Shoulder Pouch

    Cat. No. 55419-SP
    16 pockets for better tool storage. Orange interior for easy tool visibility. Tough, durable rubber feet protect from the elements. 1680d ballistic weave for durability. Shoulder strap and handle for easy carrying.

    Tradesman Pro™ Tech Backpack

    Cat. No. 55456BPL
    Carry both your laptop and tools in the same bag with Klein Tools' Tradesman Pro Organizer Tech Backpack. It has a separate compartment that keeps a laptop protected from other tools, plus 25 more pockets to designed to store adapters, cables, phones, and tools. It's great for technicians, contractors, or any tradesperson who needs to carry a laptop to the jobsite.

    Tradesman Pro™ Tech Backpack 2.0

    Cat. No. 55439BPTB
    This backpack features a separate compartment to fit a laptop up to 3'' thick including Toughbook® laptops! A hard, molded front pocket protects safety glasses. The 1680d ballistic weave and tough, durable molded bottom protects from the elements.

    Tradesman Pro™ Tool Gear Backpack

    Cat. No. 55475
    Klein’s new Tradesman Pro™ Tool Gear Backpack is just the right size for the tools and gear you need to finish today’s task. The body of the bag is made of durable 1680d ballistic weave material with a tough, diamond-textured coated bottom for added durability. Thirty-five, multi-sized pockets and a bright orange interior keep your tools organized and easy to find.

    Tradesman Pro™ Tool Pouch, 6-Pocket

    Cat. No. 5241
    Organize your tools to match your jobsite needs. Mix and match this 6 pocket Klein Tools pouch with a padded tool belt. This pouch is great for carrying a variety of screwdrivers and tools for every day jobs requiring your basic tools.

    Tradesman Pro™ Tool Pouch, 9-Pocket

    Cat. No. 5242
    Organize your tools to match your jobsite needs. Mix and match this 9 pocket Klein Tools pouch with a padded tool belt. This unique tool pouch features a clip on handle or shoulder strap for easy hands free carrying. And there's plenty of room for lots of tools to meet most jobsite demands.

    Tradesman Pro™ Ultimate Electricians Bag

    Cat. No. 55418-19
    55 pockets for ultimate tool storage. Orange interior for easy tool visibility. Wide opening fits power drills, meters, laptops, etc. Tough, durable molded bottom protects from the elements. 1680d ballistic weave for durability.

    Twisted Pair Radial Stripper

    Cat. No. VDV110-261
    Klein Tools' Twisted Pair Radial Stripper features durable, high-carbon steel cutting blades that automatically adjust to the cable diameters and won't damage internal conductors. Consistent cuts won't nick the inner sheaths. Klein's exclusive external blade easily strips wire jacket mid-span and/or opens wire jacket lengthwise.

    Tyre (Tire) Lever

    Cat. No. 5TL600
    Fit and remove four-wheel drive car and truck tires with Klein Tools' Tire Lever. This durable tool is forged from tough chrome alloy steel. Fine tapered and ground ends make for easier use and prevent damage to tires.

    Tyre (Tire) Lever - Truck

    Cat. No. 5MTL1
    Used to remove (MTL1) and fit (MTL2) tubeless truck tires. Thefine tapered and ground ends eliminate damage to tire. Forged from tough chrome alloy steel, this tire level was designed for function and long life.

    Tyre (Tire) Lever - Truck

    Cat. No. 5MTL2
    Used to remove (MTL1) and fit (MTL2) tubeless truck tires. Thefine tapered and ground ends eliminate damage to tire. Forged from tough chrome alloy steel, this tire level was designed for function and long life.

    Tyre Lever Heavy Duty

    Cat. No. 5TL600HD
    Fit and remove four-wheel drive car and truck tires with Klein Tools' Heavy Duty Tire Lever. This durable tool is correctly hardened and tempered to be tough and resilient. Fine tapered and ground ends make for easier use and prevent damage to tires.

    Utility Cable Cutter

    Cat. No. 63035
    Cuts 350 MCM Copper, 350 MCM Aluminum cable. Forged steel with black-oxide finish for long life. Shear-type hook jaws grab and hold cable while shear-cutting action makes clean cuts. Beveled tips for positive mating. Hinge bolt with pin-set nut for proper blade tension.

    Utility Scissor, 6-3/8''

    Cat. No. 544
    Stainless Steel blades with sharp points. Soft to the touch handles. Excellent for cutting, upholstery, headliners, rubber, and floral stems. For both right and left handed use.

    Utility Shear, Curved Blades , 6-3/8''

    Cat. No. 544C
    Utility Shear with extra large rings and curved blades. Functions with ambidextrous handles. Highly durable scissors that also provide a comfortable grip.

    Utility Shear, Stainless Steel, 8''

    Cat. No. G758HC
    This shear is one of the most widely used stainless steel in the market. Excellent for use in poultry, pharmaceutical, and other sanitary environments. Highly durable scissors that also provide a comfortable grip.

    Utility, Kevlar Shear, Fiber Optics, 6-3/8''

    Cat. No. 544KV
    Extra hard stainless steel alloy blades makes cutting Kevlar® stranded fiber optic wire a breeze. Can be used right or left handed. Highly durable scissors that also provide a comfortable grip.

    VDV Distance Meter

    Cat. No. VDV501-089
    The VDV Distance Meter determines cable length automatically up to 1500 ft. (457.2 m) on most cables with ± 5% accuracy and ± 1 ft. (0.3 m). It also includes a Cable Fault Finder that determines if cable run is broken or damaged. In addition, the cable manager measures cable remaining in a box or on a reel. This also simplifies cable estimating and helps you bill jobs more accurately. Measurements can be switched between metric and imperial units.

    VDV Ranger TDR Kit

    Cat. No. VDV501-815
    Klein Tools' VDV Ranger TDR Kit allows you to test and measure cable with the latest technology. Time Domain Reflectometry Spread Spectrum (TDR-SS) technology measures cable length up to 3,000 feet (914 m) with superior accuracy. This will help you simplify cable estimating and bill jobs more accurately.

    VDV Scout Pro LT Tester Kit

    Cat. No. VDV501-814
    Quickly and efficiently test voice, data, and video connections with the VDV Scout™ Pro LT Tester Kit. This tester even allows you to test video and data cables simultaneously saving time and improving efficiency. The VDV Scout Pro LT kit also includes location ID remotes for locating cable runs to wall outlets. Multiple VDV test functions and mapping kits are combined improving efficiency. Integrated tone generator supports multiple tones and control of pins carrying tone.

    VDV Scout Pro LT Tester Starter Kit

    Cat. No. VDV501816
    Tests continuity on voice, data and video connections. Measures cable length. Simultaneous testing of video and data cables saves time and improves efficiency. Includes 5 location ID remotes for locating cable runs to wall outlets. Integrated tone generator supports multiple tones and control of pins carrying tone.

    VDV Scout® Pro 2 LT Tester Remote Kit

    Cat. No. VDV501-825
    The Scout® Pro 2 LT Tester and Remote Kit is a versatile voice/data/video cable tester that locates and tests coax, data and telephone cables. The Test-n-Map™ Remote saves time by testing, mapping and identifying a location in a single step! In addition, you can measure cable runs, cable left in a box as well as bill jobs more accurately. With this kit, you can ensure fast and accurate cable installations each time.

    Wide Straight Wall Bucket with Pocket

    Cat. No. 5109P
    Transfer your tools safely and securely with this straight-wall lineman bucket. Made of heavy-duty canvas for long life. The bucket features an interior pocket to help keep your tools organized.

    Wide Straight Wall Bucket with Pocket/Snap

    Cat. No. 5109PS
    75-pound (34 kg) Max Load Rating. Web handle extends down the sides of the bucket for added strength. Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas. High-density polyethylene top ring for strength and chemical resistance. No. 6 canvas. The No. canvas refers to the canvas weight. No. 1 being the thickest and No. 8 being the thinnest.

    Wide-Opening Straight-Wall Bucket

    Cat. No. 5109
    75-pound (34 kg) Max Load Rating. Web handle extends down the sides of the bucket for added strength. Durable, straight-wall and tapered-wall buckets are made of heavy-duty canvas. High-density polyethylene top ring for strength and chemical resistance. No. 6 canvas. The No. canvas refers to the canvas weight. No. 1 being the thickest and No. 8 being the thinnest.

    Wire Scissor, Serrated, 3-1/2''

    Cat. No. G102S
    Hot forged, high carbon steel with straight, short, blades and long strong handles. One blade is serrated for positive cutting action. Excellent for cutting filament, ribbon, and fine wire.

    Wire Stripper/Cutter with Closing Lock

    Cat. No. 11054
    The Klein-Kurve® Wire Stripper/Cutter strips, cuts and loops 8-16 AWG solid and 10-18 AWG stranded wire. Precision, shear-type blades provide clean cuts on both solid and stranded copper wire. The strong-gripping serrated nose easily bends, shapes and pulls wire. For convenience, we have easy-to-read markings on both sides as well as doubled-dipped grips for comfort.

    Ankle Straps for Pole Climbers 1'' W

    Cat. No. 5301-20
    Durable neoprene-impregnated nylon strap is chemical/abrasion resistant and non-conductive. Tongue buckle has roller for easy adjustment and a comfortable leather buckle pad. Sold in pairs only.

    Ankle Straps for Pole Climbers 1-1/4'' W

    Cat. No. 5301-23
    Durable neoprene-impregnated nylon strap is chemical/abrasion resistant and non-conductive. Tongue buckle has roller for easy adjustment and a comfortable leather buckle pad. Sold in pairs only.

    Tool Belt with Quick Release Buckle, XL

    Cat. No. 5425XL
    Klein's Tool Belt features a forged, quick-release buckle for emergency situations where the user has to quickly disengage the belt (ie, working over water or in grain elevators). Belt is made of a mildew-resistant blend of cotton/polyester webbing for comfort and strength. Comfort and safety all in one.

    Rope, use with Block & Tackle Products

    Cat. No. 48502
    Klein's line of block and tackle products is engineered for high-strength requirements. This 25' long rope can be used with all Klein Tools anchors, hooks and blocks.

    Nylon Boom Strap with Friction Buckle

    Cat. No. 87916
    This is NOT an occupational protective belt for personal use. It is designed to provide a proper anchorage on a boom. Fastens snugly around aerial basket booms to provide an anchorage for attaching a fall-arrest lanyard. 1-3/4-Inch (44 mm) wide resin-treated Type 10 nylon-webbing construction for long lasting life. Conforms around boom shapes up to 48-Inches (1219 mm) in circumference. Friction buckle for tight adjustments.

    Tool Belt with Quick Release Buckle, M

    Cat. No. 5425M
    Klein's Tool Belt features a forged, quick-release buckle for emergency situations where the user has to quickly disengage the belt (ie, working over water or in grain elevators). Belt is made of a mildew-resistant blend of cotton/polyester webbing for comfort and strength. Comfort and safety all in one.

Pages