Klein Tools - For Professionals Since 1857

Parallel Jaw Grip 4502 Series


  • Round jaw
  • Maximum safe load of 5000-pounds (2268 kg)
  • Maximum cable of 0.600-Inches and a minimum cable of 0.180-Inches
  • Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
  • Weight: 3.75 pounds
JPG (High Resolution) kt4502_photo.jpg
PNG (Transparent Background) kt4502.png

The Klein KT4502 Forged Parallel Jaw Grips with Hot-Latch's large round eyelet opening in the handle is perfect for accommodating a wide variety of hooks on hoists, winches and tackle blocks. The hot latch closes automatically to guard against grip accidently disengaging from the wire. The KT4502 has a jaw length of 3-Inches.

Parallel Jaw Grip
Accommodating a Wide Variety of Hooks on Hoists, Winches and Tackle Blocks
Special Features:
Hot Latch
Overall Length:
11'' (279.4 mm)
Overall Height:
1.5'' (38.1 mm)
Overall Width:
4'' (101.6 mm)
Cable Diameter:
0.18'' to 0.60'' (4.57 to 15.20 mm)
Jaw Length:
4'' (101.6 mm)
Maximum Safe Load:
5000 lb (2268 kg)
3.8 lb (1.7 kg)
Additional Information
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.