be_ixf;ym_201911 d_17; ct_100
Klein Tools - For Professionals Since 1857

Insulated Lineman's Pliers, 9-Inch

D2000-9NE-INS

  • Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
  • Two layers of insulation provide protection against electric shock
  • Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
  • A flame retardant, impact-resistant, bright orange outer coating
  • High-leverage design provides 46-percent greater cutting and gripping power than other plier designs
  • Cuts ACSR, screws, nails, and most hardened wire
  • Integral guards help prevent hand contact with conductive parts
2000SERIES Product Icon
1000VOLT Product Icon
MADE-USA-EN Product Icon
Video
Downloads
Interactive Catalog

These Klein Tools 9-Inch Insulated Side-Cutting Pliers have jaws knurled with a cross-hatch pattern for excellent gripping. They are made of steel alloy for strength and performance.

Specifications
Type:
High-Leverage Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wires
Special Features:
Integral Guards Help Prevent Hand Contact With Conductive Parts
Overall Length:
9.68'' (24.6 cm)
Material:
Induction Hardened Steel
Nose Type:
New England
Jaw Length:
1.594'' (4.1 cm)
Jaw Width:
1.313'' (3.3 cm)
Jaw Thickness:
0.625'' (1.6 cm)
Jaw Capacity:
1.43'' (3.6 cm)
Knife Length:
0.781'' (2 cm)
Cut Style:
Side-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange
Handle Finish:
2-Layer
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
1.3 lb (0.6 kg)
UPC:
092644700859
Additional Information
WF_CUTS-ACSR Feature Icon
WF_CUTS-SCREWS-NAILS Feature Icon
Warnings
  • Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
  • Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
  • Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
  • Wear approved eye protection. Always inspect your tools before use.
  • Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
  • Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.