Klein Tools - For Professionals Since 1857

Chicago® Grip with Latch 0.37'' Cable

1684-5H

  • Hot-line grips for steel stranded cable
  • Grip may be placed on wire with hot-line stick
  • When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
  • Standard hot-line grips are not supplied with springs or lock-open features
  • When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example: S1684-5H)
Downloads
Images
JPG (High Resolution) 1684-5h_photo.jpg

Designed for use on aluminum, copper, weatherproof coated wire, PVC covered conductors and messenger and guy strand. The Chicago style grip was designed for cable sizes from 0.12-Inch to 1.0-Inch (3.10 to 25.4 mm). Hot-line grips for both bare and insulated conductors. Grip may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire. Standard hot-line grips are not supplied with springs or lock-open features.

Specifications
Application:
Steel Stranded Cable
Special Features:
May Be Placed on Wire with Hot-Line Stick
Material:
Steel
Cable Diameter:
0.217'' to 0.550'' (5.54 to 13.97 mm)
Jaw Length:
5'' (127.0 mm)
Maximum Safe Load:
8000 lb (3629 kg)
Weight:
6.5 lb (2.9 kg)
UPC:
092644471674
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.