Klein Tools - For Professionals Since 1857

Chicago Grip Hot-Line 0.31 to 0.53-Inch

S1656-30H

  • Chicago Grip-with Hot-Line Latch for Bare Conductors has round inside-jaw contour
  • Jaw length: 4-7/8-Inch
  • Maximum safe load of 4,500 pounds
  • Standard hot-line grips are not supplied with springs or lock-open features
  • Klein offers a lifetime warranty on material defects and workmanship for the normal life of the product
Downloads

The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors is for both bare and insulated conductors. The Klein S1656-30H Chicago Grip-with Hot-Line Latch for Bare Conductors may be placed on wire with hot-line stick. When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.

Specifications
Type:
Hot-Line Latch Chicago Grip
Application:
Bare and Insulated Conductors
Special Features:
Round Inside-Jaw Contour
Cable Diameter:
0.1'' to 0.53'' (7.87 to 13.46 mm)
Jaw Length:
4.75'' (120.7 mm)
Maximum Safe Load:
4500 lb (2041 kg)
Weight:
4 lb (1.81 kg)
UPC:
092644471094
Additional Information
Warnings
  • Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
  • When used on/near energized lines, ground, insulate, or isolate grip before pulling.
  • Do not exceed rated capacity.
  • Always match proper size and type of grip to application.
  • Grips are to be used for temporary installation, not for permanent anchorage.