You are here

New Products

VDV501828
VDV Commander Test Kit

Klein Tools' VDV Commander Test Kit is a full-featured voice/data/video cable tester. It locates, tests and measures coax, data and telephone cables to ensure fast and accurate installations. In addition, the Commander detects Power over Ethernet (PoE) and can store and output test results for easy report management.

Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables.. Identify wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding.. Detect, identify and test Power over Ethernet (PoE).. Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology.. Measure paired-conductor cables up to 1,500 ft. (457 m) with accuracy of up to ±(5% and 1 ft./0.3 m)..

Photos

Video

Downloads

Download the Brochure
Download the Instructions
Download the Instructions
VDV501829
VDV Commander Test & Tone Kit

Klein Tools' VDV Commander Test & Tone Kit is a full-featured voice/data/video cable tester. It locates, tests and measures coax, data and telephone cables to ensure fast and accurate installations. In addition, the Commander detects Power over Ethernet (PoE) and can store and output test results for easy report management.

Locate, test and measure coaxial, data (RJ45) and telephone (RJ11) cables.. Identify wiring faults including miswire, open, short, split-pair, reverse-pair and verify shielding.. Detect, identify and test Power over Ethernet (PoE).. Measure cable length and distance to a fault with Time Domain Reflectometry (TDR) technology.. Measure paired-conductor cables up to 1,500 ft. (457 m) with accuracy of up to ±(5% and 1 ft./0.3 m)..

Photos

Video

Downloads

Download the Brochure
Download the Instructions
Download the Instructions
Download the Instructions
VDV427-822
Cushion-Grip Impact Punchdown Tool Kit (110/66)

The Cushion-Grip Impact Tool Kit provides everything required to install and maintain 110 and 66 panels, cross-connect systems and wall jacks with secure terminations. Utilizing an optimized two-step impact process, the punchdown tool precisely inserts and then trims off excess wire. The 4-piece kit comes with punchdown tool, wire pick, blade and pouch.

4-piece tool kit for complete termination of 110/66 panels, cross-connect systems and wall jacks.. Cushion-Grip Impact Punchdown Tool (VDV427-421) includes a ''Hi/Lo'' impact functionality for adjustable compression force on various wire gauges, blocks and jacks.. The punchdown tool also has an integrated, extra-long shaft for reaching into bulky/crowded blocks and a heavy-duty metal collar for strength and longevity.. A unique Cushion-Grip handle reduces hand fatigue and provides superior comfort when using the punchdown tool.. Pick-up, separate or remove wires, small components, covers or debris from panels, blocks or jacks with the Wire Pick (VDV327-103)..

Video

Downloads

Download the Brochure
Download the Instructions
VDV327-103
Wire Pick

Klein Tools' voice/data/video wire pick enables manipulation of wires at busy blocks and panels. Grab wires or clean out debris in confined spaces with ease. No more messy blocks or panels.

Pick wire and insulation debris left in terminals.. Pull, manipulate or trace wires.. Pull bridge clips from 66 blocks.. Push wires into position.. Pry open covers..

Video

Downloads

Download the Brochure
VDV427-104
Dura-Blade 110/66 Cut Combination Punchdown Blade

Dura-Blade 110/66 Cut Combination Punchdown Blade is designed for durability and performance. One blade terminates and cuts on both 110 and 66 panels. Compatible with most twist and lock style punchdown tools.

Dura-Blade is manufactured using metal injecting molding (MIM) technology for better quality, durability and performance.. Precise cutting-edge for clean, accurate wire insertion, termination and trimming.. Dual 110 and 66 cut and terminate ends for versatility.. Easy blade insertion with bayonet-style (twist & lock) form factor.. Compatible with most bayonet style (twist & lock) socket punchdown tools.

Video

Downloads

Download the Brochure
VDV427-821
Cushion-Grip Impact Punchdown Tool

The Cushion-Grip Impact Punchdown Tool allows you to install and maintain 110 and 66 panels, cross-connect systems and wall jacks with secure terminations.The tools has an optimized two-step impact process. It precisely inserts and then trims off excess wire. Confidently punch down a secure and neat termination every time.

This tool utilizes a two-step impact process that precisely inserts and then trims off excess wire creating a secure and neat termination.. Hi/Lo impact functionality for adjustable compression force on various wire gauges, blocks and jacks.. Integrated, extra-long shaft for reaching into bulky, crowded blocks.. Cushion-Grip handle reduces hand fatigue and provides superior comfort.. Heavy-duty metal collar for strength and longevity..

Video

Downloads

Download the Brochure
Download the Instructions
50031
Ratcheting PVC Cutter

The Klein Tools Ratcheting PVC Cutter features a tool-free blade change. It can cut 1/2'' - 1-1/4'' (O.D. 5/8'' - 1-5/8'') white and gray schedule 40 and 80 PVC. The ratcheting action allows for easy, one-hand cutting and blade release.

Provides straight cuts of ½'' - 1-1/4'' (O.D. 5/8'' - 1-5/8'') white and gray schedule 40 and 80 PVC.. Quick, one-handed blade release.. Ratchet action allows easy, one-hand cutting.. No tools required for instant blade change.. Replacement blade (Cat. No. 50032) and pin (Cat. No. 50033) available..

Downloads

Download the Brochure
27400
Tie-Wire Reel

Save time and keep your tie wire organized with the Klein Tools Tie-Wire Reel. This reel is made of lightweight aluminum and can be used either left- or right-handed.

Load 12-18 gauge wire without removing the cover.. Rugged, lightweight reel is smooth aluminum alloy with wear parts made of steel.. Feeds pre-coiled wire smoothly, easily, and quickly to save time and reduce wasted wire.. Designed for left- or right-hand use.. Large, comfortable rewind knob..

Downloads

Download the Brochure

Hi-Visibility Tools

Grips glow in the dark to help find your tools • Grips charge in natural and artificial lighting • Glow lasts up to 30 minutes

 

D20009NEGLW - Side-Cutting Pliers High-Leverage

  • Cuts ACSR, screws, nails, and most hardened wire.
  • High-leverage design. Rivet is closer to the cutting edge for 46% greater cutting and gripping power than other plier designs.
  • Sure-gripping cross-hatched knurled jaws.

D200028GLW - Diagonal-Cutting Pliers High-Leverage

  • Cuts ACSR, screws, nails, and most hardened wire.
  • High-leverage design. Rivet is closer to the cutting edge for 36% greater cutting power than other plier designs.
  • Short jaws and beveled cutting edges permit close cutting of wire, nails, and most hardened wire.

11054GLW - Wire Stripper / Cutter

  • Cuts, strips and loops 8-16 AWG solid and 10-18 AWG stranded wire.
  • Strong-gripping serrated nose for easy bending, shaping, and pulling of wire.
  • Cleanly shears 6-32 and 8-32 screws.
  • Handy closure lock for convenient storage.

Hi-Visibility Tools

NOTE: Glow time and intensity may vary if charged in low light.
Clean grips regularly to maintain glow brightness.

Photos

Downloads

Hi-Visibility Tools Brochure
KN1500PEX
Web-Strap Ratchet Hoist

Klein Tools' Web-Strap Ratchet Hoist features a tighter ratchet to reduce work and fatigue. The handle and drum knob allow you to safely control the tension release to avoid free wheeling. The hoist can be used in both a single line and double line configuration. The handle provides a 360 degree range of motion for easier adjustment from any angle.

Large, non-conductive dial (drum knob) allows web slack to be adjusted with ease.. 360° handle rotation.. 3/4 ton single line and 1-1/2 ton double line load rating.. Tight ratcheting mechanism allows precise tensioning. Meets ANSI/ASME B30.21-2005 and B30.10-2009 standards..

Downloads

Download the Brochure
Download the Instructions
1580-3
Klein Kurve® Skinning Knife

The Klein Kurve Skinning Knife from Klein Tools features a 2'' (51 mm) blade that gives increased control when scoring and slitting the cable jacket. A notch on the back of the blade works well for scraping and removing insulation. The oversized ring provides added strength and makes it easy to store.

2” (51 mm) blade for increased control when scoring and slitting cable jacket.. Ergonomic handle for maximum comfort.. Oversized ring for strength and easy storage.. Notch on blade back for scraping or removing wire insulation..

Downloads

Download the Brochure
NRHDA2
Impact Socket Adapter - Transmission

Klein Tools' Impact Socket Adapter is a must-have for lineman and utility workers. It features an improved ball detent which stays in the socket better and has greater separation force. When combined with Klein Tools' Impact Socket, it provides even more versatility with four available socket sizes to work with.

7/16'' hex to 1-1/8'' square quick-change adapter for use in 7/16'' impact guns.. Fine tuned ball detent provides improved retention, minimizing drops..

Downloads

Download the Brochure
NRHD2
3-in-1 Impact Socket - Transmission

The Klein Tools versatile 3-in-1 Impact Socket is a must-have for linemen and utility workers. It features three popular square sizes that can be quickly and easily converted for a variety of utility type applications. It also has a long, hollow shaft designed to fit over long threaded bolts.

Features three square socket sizes: 1-1/8'', 1-5/16'', and 1-1/2''. 7/16'' hex to 1-1/8'' square quick-change adapter included.. Fine tuned ball detent provides improved retention, minimizing drops.. 1'' (25 mm) diameter, 7'' (178 mm) long hollow shaft allows use on long threaded bolts..

Downloads

Download the Brochure
86615
Tape Measure - 5 m Magnetic Double Hook

The innovative, high-quality features of Klein Tools' standard tape measures are now available in metric versions. Powerful rare earth magnets on the end hooks are five times stronger. They also feature a double-sided rule for measurement while using against a wall, ceiling, or conduit.

Rare earth magnetic double end hook.. Oversized, bold blade numbers for easy reading.. Double-sided rule for measurement while using against wall, ceiling or conduit.. Horizontal and vertical standout for easy one person measurements.. Shock and impact resistant case..

Downloads

Download the Brochure
86675
Tape Measure 7.5 m Magnetic Double Hook

The innovative, high-quality features of Klein Tools' standard tape measures are now available in metric versions. Powerful rare earth magnets on the end hooks are five times stronger. They also feature a double-sided rule for measurement while using against a wall, ceiling, or conduit.

Rare earth magnetic double end hook.. Oversized, bold blade numbers for easy reading.. Double-sided rule for measurement while using against wall, ceiling or conduit.. Horizontal and vertical standout for easy one person measurements.. Shock and impact resistant case..

Downloads

Download the Brochure
63711
Open Jaw Cable Cutter

The Klein Tools Open Jaw Cable Cutter is uniquely designed to work in confined spaces. The front loading, open-style jaw makes it easy to cut cable in tight places like panels and sub panels. The high-leverage ratcheting mechanism allows for single handed cutting of copper and aluminum.

High-leverage ratchet mechanism for single-handed cutting of up to 600 MCM copper and 750 MCM aluminum without burrs or sharp edges.. Front loading jaws for tight applications.. Spring release lever allows for fast jaw reset in between cuts.. Plastic covered handles with hand guards for comfort and firm grip.. One-year warranty..

Downloads

Download the Brochure
Download the Brochure
VDV226-107
Compact Ratcheting Modular Crimper

The Compact Ratcheting Modular Crimper provides fast, reliable connector termination for voice and data applications. This all-in-one tool, cuts, strips, and crimps data and voice cables. Its direct lateral crimp action provides more even, precise contact termination across all pins than ordinary indirect crimp tools. A compact, ergonomic design provides easy usage and storage.

All inclusive tool cuts, strips and crimps data and voice cables.. Cuts and strips CAT6, CAT5e, CAT3 and flat-satin voice cables.. Crimps 6 and 8 position modular connectors (RJ11, RJ12, RJ45). Compact, ergonomic design for natural, single-hand operation.. About 40% smaller than other crimpers for easy storage..

Video

Downloads

Download the Brochure
Download the Brochure
Download the Instructions
5104VT
Velcro® Top Leather Bottom Bucket

Velcro® Top with multiple attachment loops for easy access and tool storage.. 100 lbs (45.4 kg) load rating.. Durable canvas body with leather reinforced bottom.. High-density polyethylene rim.. Velcro® is a registered trademark of Velcro Industries B.V..

Downloads

Download the Brochure
662-7-INS
Insulated #2 Square Screwdriver - 7'' (178 mm) Shank

Klein insulated tools combine excellent functionality along with reduction of risk of injury where a tool might make contact with an energized source with voltage up to 1000 volts. Two layers of insulation provide protection against electric shock. Clearly marked with the official 1000-volt rating symbol. Round shank with square-recess tip.

1000V Rated for safety.. Durable two-layer, molded insulation to meet or exceed all ASTM and IEC standards for insulated tools.. Cushion-Grip handle for greater torque and comfort.. Custom US-made steel tool.. Made in the USA..

Video

Downloads

Download the Instructions

Pages