You are here

Parallel-Jaw Grip

Cat. No.: 
1685-31
Product Features
Lightweight, compact grips pull an exceptionally wide range of cable sizes and types.
Designed with a round inside-jaw contour for maximum contact to minimize conductor damage.
Lower jaw is serrated to firmly grip insulated cables and conductors.
Design includes a latch that prevents the grip from falling in case of jaw disengagement from the cable.
Large-diameter eye accommodates large hooks on hoists, winches and tackle blocks.
Maximum Safe Load - lbs: 7500 lbs. (3402 kg)
Maximum Cable: 1.250'' (32 mm)
Minimum Cable: .625'' (16 mm)
Approx. Weight Each: 5 lbs. (2.3 kg)
Jaw Length: 4.50'' (114 mm)
Maximum Safe Load - kg: 3409 kg
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.