You are here

10'' (254 mm) Insulated Pump Pliers

Cat. No.: 
D502-10-INS
Product Features
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Secure tongue and groove design for non-slip grip - even with heavy pressure.
Integral guards help prevent hand contact with conductive parts.
Handle Color: orange
Handle Finish: insulated
Maximum Jaw Capacity: 1-3/4'' (44 mm)
Overall Length: 10-1/4'' (260 mm)
Weight (lbs.): 1.09

Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Wear approved eye protection. Always inspect your tools before use. Do not use if orange coating cracks, breaks or becomes damaged. Destroy tool if white layer shows through orange layer.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.