You are here

8'' Insulated HD Long Nose Pliers

Cat. No.: 
Product Features
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Skinning hole for No. 12 AWG wire.
Heavier design for easier, more comfortable cutting.
Extended handles provide added reach and leverage.
Integral guards help prevent hand contact with conductive parts.
Klein Tools Feature Icon - klein/wf_solid-12awg.jpg
Long Nose
For Work Near Energized Sources
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
8-7/8'' (225.4 mm)
Induction Hardened Steel
Jaw Length:
2-5/16'' (58.7 mm)
Jaw Width:
1'' (25.4 mm)
Jaw Thickness:
1/2'' (12.7 mm)
Point Diameter:
0.125'' (3.18 mm)
Cutting Knives:
Knife Length:
5/8'' (15.9 mm)
Cut Style:
Side-Cutting and Skinning
Joint Type:
Handle Color:
Handle Length:
5-5/8'' (142.9 mm)
IEC 60900 and ASTM F1505
0.70 lb (0.32 kg)


Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.

Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

Wear approved eye protection.

Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.

Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

Buy Now