You are here
6'' (152 mm) Insulated Standard Long-Nose Pliers - Side-Cutting
4-27/64'' (112 mm)
High Dielectric Plastic
1-15/16'' (49 mm)
3/8'' (10 mm)
Jaw Tip Size:
3/32'' (2 mm)
11/16'' (17 mm)
1/2'' (13 mm)
Induction Hardened Steel
6-7/8'' (175 mm)
Flame Retardant and Impact Resistant Handle
IEC 60900 and ASTM F1505
Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.
Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.
Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.
Wear approved eye protection.
Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.
Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.