You are here

8'' Insulated HD Diagonal Cutting Pliers

Cat. No.: 
D2000-48-INS
Product Features
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol
Two layers of insulation provide protection against electric shock
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool
A flame retardant, impact-resistant, bright orange outer coating
Angled head for easier work in confined spaces
High-leverage design. Rivet is closer to the edge for 36% greater cutting power than other plier designs
Cuts ACSR, screws, nails, and most hardened wire
Integral guards help prevent hand contact with conductive parts
Klein Tools Feature Icon - klein/wf_angled-head.jpgKlein Tools Feature Icon - klein/wf_cuts-acsr.jpgKlein Tools Feature Icon - klein/wf_cuts-screws-nails.jpgKlein Tools Feature Icon - klein/wf_standard-cut.jpg
Specifications
Type:
High-Leverage Pliers
Application:
ACSR, Screws, Nails and Most Hardened Wire
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
8-1/4'' (209.6 mm)
Material:
Induction Hardened Steel
Nose Type:
Angled
Jaw Length:
13/16'' (20.6 mm)
Jaw Width:
1-3/16'' (30.2 mm)
Jaw Thickness:
13/16'' (20.6 mm)
Cutting Knives:
Standard
Cut Style:
Diagonal-Cutting
Joint Type:
Hot-Riveted
Handle Color:
Orange
Handle Finish:
2-Layer
Handle Length:
6-3/4'' (171.5 mm)
Insulated:
Yes
Standard:
IEC 60900 and ASTM F1505
Weight:
0.70 lb (0.32 kg)
Videos

Downloads
Warnings

Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.

Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

Wear approved eye protection.

Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.

Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

Buy Now