You are here

Insulated Crimping/Cutting Tool

Cat. No.: 
Product Features
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Tapered nose designed for working in confined spaces.
Crimping dies marked for insulated and non-insulated solderless terminals and connectors.
Accommodates wire from No. 10 to 22 AWG.
Wire cutter in nose.
Integral guards help prevent hand contact with conductive parts.
Klein Tools Feature Icon - klein/wf_insulated-connector.jpgKlein Tools Feature Icon - klein/wf_noninsulated-connector.jpg
10-22 AWG Insulated and Non-Insulated Solderless Terminals and Connectors
Special Features:
Flame Retardant and Impact Resistant Handle
Overall Length:
9-3/4'' (247.7 mm)
Induction Hardened Steel
Handle Color:
Handle Material:
High-Dielectric Plastic Cushion Grip
Joint Type:
Nose Type:
10 - 22 AWG
IEC 60900 and ASTM F1505
1.0 lb (0.5 kg)


Only use tools that are marked with the official international 1000-volt rating symbol shown above, if there is any chance that the tools will make contact with an energized source.

Whenever possible, always de-energize lines and equipment prior to working on or around them. Klein insulated tools are designed only to reduce the chance of injury where the tool may make contact with an energized source.

Do NOT touch uninsulated portion of the tool or any conductive object when either might contact an energized source.

Wear approved eye protection.

Because moisture, films, or other surface contaminants are conductive, Klein insulated tools must be kept clean, dry, and free of any surface contaminants.

Always inspect your tools before use. Destroy tool if insulation becomes damaged in any way.

Buy Now