You are here

Chicago® Grip with Latch 0.86'' Capacity

Cat. No.: 
Product Features
Hot-line grips for both bare and insulated conductors
Grip may be placed on wire with hot-line stick
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire
Standard hot-line grips are not supplied with springs or lock-open features
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example: S1684-5H)
Klein Tools Feature Icon - klein/wf_grips-round-jaw.jpg
Bare Conductors
Cable Diameter:
0.74'' to 0.86'' (18.80 to 21.84 mm)
Jaw Length:
5.5'' (139.7 mm)
Maximum Safe Load:
8000 lb (3629 kg)
8.45 lb (3.83 kg)

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.

When used on/near energized lines, ground, insulate, or isolate grip before pulling.

Do not exceed rated capacity.

Always match proper size and type of grip to application.

Grips are to be used for temporary installation, not for permanent anchorage.