Electronic AC/DC Voltage Tester, 12 to 600V

ET60

  • Voltage Tester for AC/DC voltage from 12-600V at nine useful levels aligned with commonly used voltages
  • Uses standard replaceable multimeter test leads for versatility
  • CAT IV 600V modern solid-state design for safety
  • Easy to use bright LED display clearly reports the voltage present in the circuit being tested
  • Integrated test-lead holders are used for lead storage or for holding the probes correctly spaced for insertion into tamper-resistant US-style outlets
  • Inherent low input impedance reduces the possibility of falsely reading ghost or stray voltages on non-energized circuits
  • Batteries not required, as tester is powered by the applied voltage in the circuit being tested
coin-ip54cativ3m Product Icon
tough-meter Product Icon
etl-intertek Product Icon
Videos
Images
High-Res JPG et60_photo.jpg
PNG et60.png
Interactive Catalog

ET60 is a solid-state, low impedance, electronic voltage tester. It measures AC/DC voltages up to 600V. The ET60 does NOT require batteries; it is powered by the applied voltage. It is excellent choice for testing voltage in electrical circuits, at outlets, in light fixtures or anywhere else where AC/DC voltage testing is required.

Specifications
Type:
Solid-State, Low Impedance, Electronic Voltage Tester
Application:
Test AC/DC Voltage From 12-600V
Special Features:
No Batteries Required
Drop Protection:
9.8' (3 m)
Display:
LED
Voltage:
12 to 600 V AC/DC
Frequency:
45Hz to 66Hz
Ingress Protection:
IP54
Pollution Degree:
2
Interchangeable Leads:
Yes
Standard:
CAT IV 600V
Included:
Tester; Test Leads
Overall Length:
5.67'' (14.4 cm)
Overall Height:
1.44'' (3.7 cm)
Overall Width:
2.84'' (7.2 cm)
Weight:
3.20 oz (92.00 g)
UPC:
092644690365
Additional Information
Warnings
  • Before each use, verify tester operation by measuring a known voltage.
  • Never use the tester on a circuit with voltages that exceed the category based rating of this meter.
  • Do not use the tester or test leads if they appear to be damaged.