Line Splitter

69400

This product is no longer in production
  • Assists in measuring the current draw of a connected load up to 15A without splitting the load's power cord.
  • Voltmeter input jacks
  • Provides X10 mode and X1 mode.
  • Designed for use with Klein Tools' Test & Measurement Clamp Meter line: CL100, CL200, CL1000, CL1100, CL1200, CL1300, CL2000, CL2100, CL2200, CL2300 and CL2500.
  • Works with many other manufacturers' clamp meters.
  • For North American-style outlets only.
Images
High-Res JPG 69400_photo.jpg
PNG 69400.png

The Klein Tools 69400 Line Splitter separates the hot from the neutral and ground wires on a standard 120V outlet so that current measurements can be made with a current clamp. Without the Line Splitter, the current clamp measures the load current going in both directions, effectively cancelling the measurement. The Line Splitter has a standard measurement section and a ten-times multiplier section for use with less accurate or higher ranged clamp meters.

Specifications
Overall Length:
6.2'' (157 mm)
Weight w/ Batteries (oz.):
3.9
Width:
2.2'' (56 mm)
UPC:
092644694004
Additional Information
Warnings
  • Do NOT use with loads greater than 15A.
  • Risk of electric shock and burn. Contact with live circuits could result in death or serious injury.
  • Do not use if Line Splitter appeaars damaged. If in doubt, replace Line Splitter.
  • Always wear approved eye protection.
  • Do NOT use Line Splitter if wet.
  • For indoor use only.