You are here

Deceleration Unit with Aircraft-Cable Lanyard D-Ring

Cat. No.: 
87412
Product Features
Durable forged circle D-ring has corrosion-resistant finish, friction-minimizing roller, and is proof-loaded to meet OSHA regulations.
Equipped with one drop-forged steel, corrosion-resistant Klein-Lok® locking snap-hook with 11/16'' (17 mm) throat opening.
Deceleration unit is attached to a vinyl-coated flexible steel cable that is 7/32'' (6 mm) in diameter and has a total diameter of 9/32'' (7 mm).
Aircraft-cable lanyards can be used around hazards such as open flame, rough-edged structural members, and welding splatter. They will not, however, resist the flame of a torch.
Typical applications include anchoring to I-beams, columns, piers, and oil-rigs.
Overlapped nylon webbing is heavily cross-stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction.
Overlapped nylon webbing is heavily cross-stitched together with nylon thread and sewn into a protective break-away jacket for optimal fall-arrest impact reduction.
Progressive tearing away of nylon stitching absorbs most of a fall-arrest impact.
A fully released deceleration unit extends the original length of a lanyard by a total of 3.5 ft (1.07 m) and virtually eliminates rebound.
Deceleration units are available separately or with permanently attached lanyards made of nylon rope, aircraft cable, or nylon webbing.
All Klein deceleration units are certified and compliant with ANSI and CSA requirements.
On Klein deceleration units, a red warning label stitched to the overlapped nylon webbing inside the protective break-away jacket will identify a used lanyard and direct the disposal of the unit.
Length: 5' (1.52 m)