You are here

Curved Jaw Grip for EHS Cable with Latch

Cat. No.: 
S1684-74H
Product Features
When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour.
Available with hot-line latch and spring.
Klein Tools Feature Icon - klein/wf_grips-doublev-jaw.jpg
Specifications
Type:
Curved Jaw Grip
Application:
Extra High Strength Galvanized Steel Cable
Special Features:
Latch
Overall Length:
9'' (228.9 mm)
Overall Height:
2-1/4'' (57.2 mm)
Overall Width:
7-13/64'' (183.0 mm)
Cable Diameter:
0.218'' to 0.550'' (5.54 to 13.97 mm)
Jaw Length:
5'' (127.0 mm)
Weight:
6.45 lb (2.93 kg)
Downloads
Warnings

Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.

When used on/near energized lines, ground, insulate, or isolate grip before pulling.

Do not exceed rated capacity.

Always match proper size and type of grip to application.

Grips are to be used for temporary installation, not for permanent anchorage.

Buy Now