You are here

Chicago® Grip - for Large Diameter Conductors

Cat. No.: 
1628-40
Product Features
Designed for hollow conductors and other large-diameter cables.
Round jaws are shaped to provide maximum contact with the cable, virtually eliminating conductor damage.
These grips are special order only. Please allow 30 days for delivery. These are not returnable.
Orders must specify exact outside diameter of cables, circular mills with strand combination, or manufacturer's code.
Each grip is made for one-size cable only.
Maximum safe stringing tension 12,500 lbs (5670 kg) to minimize conductor damage.
Minimum Cable: 1,033,500 CM ACSR 1.24''
Maximum Cable: 1,590,000 CM ACSR 1.54''
Jaw Length: 10-3/4'' (273 mm)
Approx. Weight Each: 34 lbs. (15.4 kg)
Maximum Safe Load - lbs: 25,000 lbs (11,340 kg)
Maximum Safe Load - kg: 11,340 kg
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.