You are here

Chicago® Grip - with Hot-Line Latch for Bare Conductors

Cat. No.: 
1656-60H
Product Features
Hot-line grips for both bare and insulated conductors.
Grip may be placed on wire with hot-line stick.
When stick is removed, latch closes automatically to guard against grip accidentally disengaging from wire.
Standard hot-line grips are not supplied with springs or lock-open features.
When springs or lock-open features are desired, add prefix letter ''S'' before catalog number (example: S1684-5H).
Maximum Safe Load - lbs: 8000 lbs. (3629 kg)
Minimum Cable: 477,000 CM ACSR .86''
Maximum Safe Load - kg: 3629 kg
Maximum Cable: 605,000 CM ACSR .96''
Approx. Weight Each: 8.40 lbs. (3.8 kg)
Jaw Length: 5-1/2'' (140 mm)
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.