You are here

Chicago® Grip - Curved-Jaw Grip for EHS Cable

Cat. No.: 
Product Features
When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour.
Approx. Weight Each: 6.30 lbs. (2.9 kg)
Jaw Length: 5'' (127 mm)
Maximum Cable: .55''
Maximum Safe Load - kg: 3636 kg
Maximum Safe Load - lbs: 8000 lbs. (3629 kg)
Minimum Cable: .218''
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.