You are here

Home » Catalog » Wire Pulling Grips » Chicago Grips » Chicago Grips - Curved-Jaw Grips for EHS Cable

Chicago® Grip - Curved-Jaw Grip for EHS Cable

Cat. No.: 
S1684-74H
Product Features
When pulling EHS (extra-high-strength) galvanized-steel cable, the galvanizing has a tendency to coat the jaws of any grip, causing the cable to slip.
To reduce the possibility of slippage and damage to the cable, the jaws of this grip are milled on a curve with a double ''V'' contour.
Available with hot-line latch and spring.
Approx. Weight Each: 6.50 lbs. (2.9 kg)
Jaw Length: 5'' (127 mm)
Maximum Safe Load - lbs: 8000 lbs. (3629 kg)
Maximum Cable: .55''
Minimum Cable: .218''
Maximum Safe Load - kg: 3636 kg
Brochure
High Res JPG
High Res EPS
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.