You are here

Chicago® Grip - for Bare Wire

Cat. No.: 
1613-30
Product Features
Lightweight, cost-effective grip.
Designed for working with solid and stranded bare wire from .08'' (2 mm) to .20'' (5.1 mm).
Single ''V'' groove jaw.
Approx. Weight Each: 1.50 lbs. (0.7 kg)
Jaw Length: 3'' (76 mm)
Maximum Cable: 4 B&S solid .20''
Maximum Safe Load - kg: 680 kg
Maximum Safe Load - lbs: 1500 lbs. (680 kg)
Minimum Cable: 12 B&S solid .08''
Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Do not exceed rated capacity.
Always match proper size and type of grip to application.
Grips are to be used for temporary installation, not for permanent anchorage.